HOW TO PAPER MACHE | Restoration Hardware bowls dupe | DIY home decor

Crafted Touch
14 followers
61 Video Views·Aug 11, 2025
Give these takeaway containers new life by transforming them into beautiful Restoration Hardware inspired papier-mache bowls!
Bonus: how to make ceramic look technique included in this video
Hey what is happening everyone my name is Rhea and welcome to my channel.
If you're just like me who loves high end home decor but instead of purchasing
that item you're wondering whether you can recreate it yourself or less
then stick around because today I'm going to show you how I recreated these
paper mache balls using two different methods. Now they've
both turned out so beautifully but I think I may have a favorite technique.
Not about to ruin anything for you here so I'm going to let you see and decide
for yourself which one you think will be best for you. Let me know down the
comments below which one is your preferred method.
While you're at it give this video a thumbs up if you like it and let's jump
right into the DIYs. For the first project we will need some
pieces of paper. I used here some packaging paper I had
put aside from all my online lockdown orders.
You can also use newspaper or some scrap paper that you may have lying around
the house otherwise if you don't have that you
can use some brand new paper instead. You also need a vessel to act as a
mold. I thought these takeaway containers would be so perfect for our project
today. A brush. I only really use one of these
brushes. E6000 glue but ignore that because I
ended up using hot glue instead which I found easier and more efficient
to use. Some aluminium foil to add shape to your vessel.
Scissors. PVA glue and a piece of cardboard box that
you can cut to add shape to your vessel as well. So I
cut a strip of this cardboard to glue to the bottom of my vessel
and that will serve as a base just to slightly elevate that bowl
off the surface. To make this vessel a little more interesting I rolled up some
aluminium foil. There's really no right way of doing this
just scrunch it up glue it onto the vessel and as you can
see here this is where the E6000 glue has let me
down. It's just not sticking to the vessel so
I use hot glue instead and that worked quite the treat.
Got a bit carried away and made another strip of aluminium foil which proved to
be somewhat unnecessary later on because
it wasn't thick enough to make a difference.
For the glue mixture I used one part glue and one part water
and mixed it thoroughly. Then I just applied the glue mixture to my vessel
and started sticking the paper pieces on it.
Repeat the same for the inside part of the bowl
and just repeat the process until the entire vessel is covered.
And here's the first layer completed and just allow it to dry a little
at least halfway. Once half dry I apply the second layer of paper pieces on top
using the same method. The difference is as you can see I've gotten the hang of it
now and the paper pieces adhere easily onto the first layer.
And while we let that one dry let's start on the second project.
Okay so this second technique was really fun to make. I've never made paper clay
before but it was very easy and very enjoyable.
So what you need is a large mixing bowl, again a vessel to use as a mould,
some toilet paper, flour and joint compound.
Oh and how can I forget I also use PVA glue
and a trusty old hot glue for this project as well.
Again I cut up some cardboard strips to add more shape to my vessel.
You can do the same thing if you prefer. I just wanted to make the edges here a
bit thicker and I also wanted it to look a little
different to my first project.
So as you can see here I've added the cardboard pieces to the inner part of
the bowl, the outer part as well.
I added some to the base just to elevate it a little bit
again like the first project. And just for good measure I added
one more just under that weird lip thing because there was just too much gap in
between the cardboard and the vessel itself. And here it is
with all the moulding on. It's okay if it's a little bit lopsided
and it's not perfect it does not need to be at all.
I think it'll just give your bowl a little bit more character later on and
it'll be unique to you. Okay so to make the clay I soaked some
toilet paper in water and then I started shredding it to pieces
like so. Just shred it until all the fibres fall
apart and you'll find that it's really easy to do this with toilet paper
as opposed to say some regular paper or newspaper and the like.
Then I drained and squeezed most of the water out of the paper but you don't
want the paper to be rock solid in the end because it'll be really hard to mix
all the ingredients together. So just make sure that the paper falls
apart easily with your hand. This here is about a cup and a quarter
worth of damp paper. Add a cup of joint compound into the mix
then add three quarters of a cup of PVA glue
then mix it all up using a hand mixer. Look if you don't have a mixer you can
absolutely do this with your hands or with a spatula but this is just the
quickest way of doing it. You can then begin gradually adding the
flour to your mix. Don't dump it all together at once just
try and gauge how thick you want your mixture to be.
It also depends how much water you've squeezed out of your paper.
I think I left my paper a little bit more damp than desired
and so I added a cup of flour all together to my own mixture.
From here you can literally just slap the paper clay onto that bowl onto
whatever vessel you may have and cover it however you like. You can
shape it to whatever shape you like you can add some ridges some bumps some
texture it's completely up to you. See I think I definitely could have
squeezed out a little bit more water for my paper
or maybe add a little bit more flour but it was getting really sticky and very
hard to mix with my hand mixer there. It took me some time to get used to
how to manipulate the clay but overall I was really happy with it.
The only trouble with this is because it's a bowl then you can only do
one side at a time and so I've had to do the outer part first
let it dry and it took about two days or so and then I've had to do the inner part
of it and then wait another two days. Otherwise it was really fun you guys
really need to try this method. Okay that's enough of that let's move
on to painting our first project. For the base paint layer I used the
bicarb soda technique that most of you are familiar with.
I added a bit of brown to the white paint just to warm it up a little bit.
I was going for an aged distressed look here so that white is a little too clean
for me. The bicarb soda will add texture to the
surface and I'm actually not a big fan of those uniform lines you can see here
from the paper so hopefully that will cover it up.
For the second layer I added more brown to the bicarb paint mix
and kind of just painted haphazardly so that the first paint layer is still
visible so you'll have a mix of dark and light
paint for contrast. Once the bicarb paint layer was dry I
went ahead and covered the bowl with joint compound.
Look you can do it this way or stop after the bicarb layer and call it a day.
It is your project and it's completely up to you so there's really no
right or wrong process here. Then I used a damp sponge
just to make the transition to joint compound appear more seamless
and I just repeated the process until I covered the entire bowl.
Okay so with every project I do even though it's some cheap project like
this or I mean they're all cheap projects I
always have an end goal. It doesn't have to be a rigid
I have to achieve so-and-so because I know that part of DIY is experimenting
but I always picture you know what kind of
feelings I want to feel when I look at this project for
weeks and months or maybe even years later.
You know it's really dorky. So in saying that
my end goal yeah really for this particular bowl
is for it to look like it's old like it's been forgotten
and I want it to look like you know that it used to be a smooth ceramic bowl
but because it's been on the ground and it's been thrown around
it's now broken and it's chipped everywhere. I really want it to look like it's one of
a kind. So to make it look like it's chipped I
just tap my spatula onto the joint compound
and in doing that it lifts some of the joint compound off
then I sort of just flatten the edges a little bit and then
once it dries you'll have a semi-smooth top layer
and then a rough surface just underneath that peeking out
and then of course it's just a little bit too clean and to make it a little
bit more worn and dirty like it's been on the ground
you just rub some coffee ground onto the surface and some of it will get stuck
into the crevices. I just use a brush to get some of it out
later on. So this is it really. This is the first
project all done and I'll show you the end product in a
little bit. In the meantime let's paint the other bowl.
So I use the same espresso acrylic paint I mean espresso it's brown guys
it's brown so I diluted the brown paint with water
and I just covered the entire bowl with it as a base layer paint.
From here on out all I'll be doing is really just layering
and layering and layering paint on top of each other.
Next I use the same paint color to randomly brush over
the vessel to accentuate the uneven surface.
Then I mix white and brown and just use my finger
and then also later a damp sponge to add some highlights to the bowl
and then I diluted some black paint and brushed it onto
the surfaces where we can presume are high touch areas
or areas that may have come in contact with the elements more frequently.
Then I mixed a bit of brown and black together for the crevices
just to add some shadow and depth.
And finally I rubbed some coffee grounds like I did on the first project
and then brush all the residue off and that is it for this second project.
If you love this project as much as I do give this video a like
and let me know down below do you have a favorite between the two
and subscribe now so you don't miss out on future projects.
Till next time, peace out.
