Learn How to Sew a Crop Top T-Shirt & Dress - Beginner Friendly DIY Sewing Tutorial for the Kayla Crop Top & Dress Pattern: a Stylish Favorite for Every Season!
Whether you love to layer or want an easy top or dress that stands on its own, this dolman pattern has you covered. It's perfect for pairing with shorts, jeans, or a skirt. Or wear it solo as a throw-on-and-go dress. Style it with your favorite sneakers or sandals for a comfortable, effortless outfit that offers plenty of freedom to move. From lounging to lunch dates: this is the piece your wardrobe has been waiting for Chapters - Timecodes {DELETE THE TIMESTAMPS BELOW AND ADD YOUR OWN - USE THE TUBE BUDDY TO MAKE THE CHAPTERS EASILY OR FAST FORWARD WATCHING THE VIDEO TO NOTE KEY MOMENTS. 4-6 CHAPTERS IS BEST} 00:00 - Intro 00:35 - Preparing pieces 02:40 - Memory Press Hems 03:35 - Pinning/Sewing Shoulders/Sides 08:44 - Coverstitching/Hemming 13:39 - Long Sleeves 16:52 - Sewing the Neckband 26:45 - Outro and Finished Garments
Hi everyone, I'm Lindsay with Ellie and Mac Sewing Patterns.
Today we're going to be making the Kayla crop top and dress pattern.
So I have both a crop top cut out, look how cute it is, very small, and a dress with long
sleeves cut out.
So we're going to do short sleeves on the crop top and we're going to do long sleeves
on the dress.
I am making these for the little ones in my neighborhood and I can't wait to see the smiles
on their faces.
So let's get to this.
The first thing we're going to do is just prepare the pieces.
So what I like to do when I'm doing some of the similar steps with the different things
is to kind of do all of the same step at the same time because it's just the most efficient
way to sew.
So for me, I'm going to pin or clip across the shoulder seams for all pieces.
I'm also going to fold my neck bands right side together and clip them as well.
We're going to set the sleeve aside for right now.
Start with one of your bodices, right side up, and then place the next bodice right side
down, right on top.
I am using double brush poly for both of these, but these two.
Before we clip or sew our neck band and our sleeves, we can do a memory press.
Now a memory press is where we, when we press up the hem allowance before we sew so that
once we go to sew, it folds right back up.
It remembers the pressed seam that we did, even though we opened it up when we sewed
the seam.
It'll fold right back up really nicely and with these, with these teeny tiny hems, it's
just going to make more sense if there, if we have that memory press first.
So for your neck band, I suggest the same thing.
You can press it long ways in half like this for both, and then we'll just open it up and
pin it here.
And then we'll sew this, but then when we go to fold it, it'll fold really nicely without
us having to try to get it to press again with this, such a teeny tiny little piece
of fabric.
You can also do this with the hem of your top and dress if you want.
So you can just press up the hem and then we can sew.
I just think that's going to make this process easier.
So before we get too far along, let's go press all of those seams so that they are prepped
and ready and we'll make our sewing process faster.
You might wonder why the back is taller than the front sleeve wise, and that is because
the back has to go up and around to the top of the shoulder and that needs more fabric
to get there.
And the front just kind of goes kind of straight down from the shoulder.
So in order for your top to not be constantly pulling backward because of the shoulder,
this is what we do to prevent that.
Put that over here and let's do the dress.
For the dress, I'm just going to do the shoulders right now because then we will attach the
sleeves after we do the shoulders before the sides.
Before the sides.
Okay, so we're going to go sew the shoulders of our dress, the short ends of the neckband,
the shoulders and the side seam of our crop top, and then we'll come back.
Let's go do it.
Now that we have our shoulders sewn and our shoulders and our sides sewn and our neckband
sewn, we need to press.
So we're going to press all of our seams flat.
I like to press my seams to the back and you can do whichever you feel best about, but
that's how I like to do it.
And then we'll come back and I'll tell you what to do next.
Now you want to take your iron and gently press the seam.
You can use your iron flat on an ironing board or you can use what's called a tailor's ham
like I'm using.
I got my ham at wawack.com.
You can also get them other sewing supply stores like bohofabrics.com and stores like
that that sew not only fabric but also supplies.
You can just put it flat and iron it too if you don't have one, but I think that they're
very handy.
So if you don't have one yet, I do suggest investing in one.
They're only like maybe $15 or less.
I can't remember, but I don't think it's very expensive.
And I bet if you look, there is a tutorial on YouTube on how to even make your own.
But then you're just going to press your neckband in half so that you can just refold along
that memory press we did.
And as you can see, it folds up really nicely.
Just press it again, give it a good press, and then you'll have that done.
And then just do your next band the same way.
You want to press the center short ends and then go ahead and fold it.
I have been considering getting a cordless iron.
I don't know if anyone has experience with a cordless iron, but my cord keeps getting
in the way and it's very frustrating.
So if you have any tips or tricks for me on how to keep my cord out of the way, I would
greatly appreciate them.
I do have part of it kind of folded up, but you know, it still gets in the way.
So we're going to press the side seam to the back and I put my ham inside.
You can kind of just lay it over, but it just works well to stick it inside and then adjust
the fabric as I go.
And you know, the top is a little bit more narrow, so it works to get into sleeve areas
and necklines really well.
And then you just want to do the other side.
For the dress, I'm adding the long sleeves.
So we're going to press the shoulder seam.
I press the seam to the back and then I'm going to topstitch with my coverstitch right
across this shoulder and then sew on the sleeve and it's going to look really nice.
I am using my Baby Lock Euphoria coverstitch machine.
I love how easy it is to use.
But the most important thing to do before you start your project is to test a piece
of scrap fabric that you're using for your garment to make sure that it doesn't tunnel
or do something weird when you're stitching.
So I've got this piece and I'm going to test it.
You just want to go straight across and just see how it behaves.
Mine looks pretty good, so I think I'm good to go.
I'm going to go ahead and grab my shirt and we'll get going.
So I'm going to start with my dress.
I'm going to put my shoulder seam right under my presser foot and align the stitch line
indicators with the seam area I want.
I'm going to lift the presser foot and just kind of slide my fabric under so it's ready
to go.
And then I'm just going to sew straight across.
You just let the machine pull it through.
You don't want to be pulling or pushing because that could ruin the machine and it also would
make your fabric wavy.
So just let it go across and then we'll just keep sewing and go across the other shoulder.
Just in the same way that we did the first one.
Now we're going to do the hem of our shirt.
So we're going to actually start, I like to be at the side back and your hem is pressed
under.
You want to make sure it's staying pressed under as you go.
So I like to kind of keep checking and I just use the guide on the machine to make sure
I'm keeping my stitches straight.
And then I just keep adjusting and keep flipping over.
Now you could save yourself time and pin or clip this before you start to do your hem.
I didn't do that this time, but in the future it does kind of save time if it's already
secured.
It just depends on if your fabric tends to be really stretchy because the clips are heavy
and sometimes I worry that they'll make the seam wavy if they're, you know, pulling in
any direction while I'm going around.
Because again, you don't want to be doing anything on your end.
You want to just allow the machine to pull your fabric through and do its job because
that's exactly what it's designed to do.
So it doesn't need any help.
It'll just gently pull it through and you're just guiding it as it's going around.
So just take your time, keep checking.
And when you get back to where you started, you want to trim off the beginning threads
at the top.
And then we're going to slowly go back around because you want to match up your stitches
so that you overlap them about an inch or two.
And then with your needle in its highest position, you will pull out some threads to give you
some slack.
And then you're going to pull those threads with some sort of small object out from underneath
the presser foot and then cut it.
Then cut the other string at the bottom.
We just have to tie off our threads underneath and this locks in all of our stitches.
So I like to do two or three little knots and then I just trim it away and it's good to go.
Now we just need to do our sleeve in the same way.
So we will refold that memory press fold that we did before we began sewing and we're going
to start in the back near the armpit of the seam and then we will sew around.
This is a little trickier because the fabric kind of gets up and in the way and so once
you get it on the machine, you just want to kind of carefully adjust it and go slow
so that you're not stretching and so that the fabric isn't getting caught and sewing
over something that it really shouldn't be.
Now we're going to take our sleeve and we're going to place it right sides together to
our sleeve opening on the dress.
Make sure you match the front of the sleeve to the front and the back of the sleeve to
the back.
There are markings on each.
And then you're just going to clip it in place and repeat for the other side.
Then we're going to sew across with a fourth of an inch seam allowance and press it.
Now we're going to fold our dress down so it's right sides together or top if you're
making a long sleeve top and you're going to align your ends here, your sleeve hem and
then your seams.
You can trim away those tails if you need.
And then I like to hook down here at the hem.
And then we're just going to clip in between just a few times just to keep everything together.
Double brush poly tends to be sticky so I feel like it sticks to itself and that can
be annoying sometimes.
Then do the same thing for the other side.
Now we're going to go and we're going to sew down each sleeve to the bottom hem and we're
going to use a fourth of an inch seam allowance.
I'm going to use my serger.
As any time you can always use only a sewing machine using your lightning stitch and that's
perfectly fine.
And if you want to hem or topstitch you can always use a zigzag stitch, your lightning
stitch or even your double needle attachment for your sewing machine.
Let's do it!
For the sleeve, after you've sewn the side seam, you want to put it under the cover stitch
presser foot and just do the same thing as you did before when we hemmed the sleeve of
our crop top.
But we're just going to very carefully keep folding down our hem and making sure it's
aligned and just do the cover stitch.
You can do this on your sewing machine with a zigzag or lightning stitch but it's just
whatever your preference is.
You could technically also go ahead and do the seams before they're in a loop.
So you could have cover stitched or hemmed the sleeve before we sewed the side seams
if you're more comfortable with that.
You would just then need to thread your serger tails back into the seam or tie them off so
that you didn't have those threads hanging out.
Look how cute these are!
I'm so excited!
So now all we have left is the neck bands.
So as you can see I hemmed the bottom of the dress just like I hemmed the bottom of the
shirt.
Same method and we have our little sleeves hemmed.
So cute!
So all we have left is our neck band.
Here you'll see I've quartered my neck band.
Quartering means dividing your neck band into four equal sections.
Then you want to do the same thing to your neckline on whatever garment you're making.
So I've done that here so you can see but I'll actually show you how I did it over here.
So first we want to find center back.
So we're going to press our shoulder seams together so we're just getting the back piece.
And where this little loop area at its furthest point from your seams is that's your center
back.
Mark that with a pin or clip.
You can even make a little snip in if you want.
Then we do the same thing with the front.
We're going to pull it away from these shoulder seams to get that center most point and we're
going to clip it.
Now you might think these are your side seams but they're not.
So if we match up our center back and our center front you'll see that actually the
quartered part of the side of the neckline is not the shoulder.
It's right there.
So we're going to put a little clip right there and repeat that on the other side.
Just like that.
So then we have our quartered neckline.
To find the quarter of the band we're going to use the seam in back as our center back
seam and then we're going to just pull apart to find center front.
Then we're going to match those up to find each side.
Now we have a quartered neckband and a quartered neckline.
So we're going to match them up now.
We're going to match up the backs.
You're just going to remove one of those if you pinned.
Make sure you don't twist your band so you're going to kind of like flip it out so it's
all together here.
Match up the front and then the sides.
Now the reason we quarter is so that when we're stretching our neckband as we go around
your neckband should be smaller than your true neckline.
That's to allow the neckband to lay flat against the chest and not like lean forward or get
really wavy.
So we usually use 85-90% depending on your fabric.
So this band is done with 87% taking into account that some knit fabrics don't have
as good of stretch as others.
So here is our quartered neckband.
Now we're going to go over to our serger.
You can use your sewing machine with a zigzag stitch or a lightening stitch and we're going
to just gently stretch our band only between our sections.
So as you see there's more neckline than neckband and as we sew we're going to pull our neckband
straight as we sew and it kind of just adds that recovery we need for once we pull it
over our head it lays flat.
So let's put this neckband on and then we'll go sew it.
I like to start near the back and then be going toward the front.
So I kind of like to give it a little stretch before I get going.
Not the neckline, just the band.
Lift my presser foot a little and then start sewing to secure it.
Then you just want to make sure you're keeping your seams flat and you're pulling your band
only so that it's flat and in line with your neckline.
Just remove your clips as you get to them and then repeat that process.
Get everything out of the way, pull straight on your band, re-adjust, if your neckband
gets kind of like twisted a little it's okay just re-adjust it as you go.
The idea is even stretching so you want to have stretched evenly across as you go around
your band.
Back to where you started, you just want to go over about an inch of where you started.
Okay, on the inside your neckband looks like that and on the outside it looks like this.
Okay, so we'll press it and then we'll topstitch it if you desire right here along this edge.
That's up to you, I'll probably go ahead and do it here in just a sec.
Let's do the other one.
You can use the ham for this again if you want.
It's a pretty handy tool, I use it all the time.
You just want to make sure your seam is down toward the bodice and then just keep rotating.
You can either go with this as your finished top ready to go or you can go ahead and topstitch
around the neckline, that's totally up to you and your preference.
But, essentially, it's done and ready to go.
Very cute.
If you don't have a ham, that's okay.
You can just press it without.
Make sure you're pressing it toward the bodice.
Finally, if you want to, topstitch around the neck.
I'm going to start in the back to make sure my stitches are going to be on the seam that
I just sewed on the bodice.
Into the fabric and then you just want to go slowly around so that you don't get way
down here or way over here, you just want to take your time.
Look how cute these are.
My little neighbor girls are going to be so excited.
This is such a cute top and it's so fun.
I think she's going to love it.
You can see the pretty topstitching along the neckline and the sleeves and the ham.
I think it turned out great.
This fabric is, again, from Oh So Pretty and I'll put a link below.
This cute fabric is very fairy-esque, garden-loving, forest-loving.
It's from knitfabric.com.
I did not topstitch the neckline on this one just to show you the difference.
It's so cute.
Just so simple.
Just a simple little dress for everyday play.
Fast sews.
If you do craft shows or stuff like that, these would be really fast sews that would
be great for selling just really sweet dresses and tops.
I think that it's just a really great pattern.
I hope that you enjoyed this.
I can't wait to see all of your little ones in their cute dresses or tops.
An update on Deanna.
She will be joining us back again soon.
I'm really excited about that as I'm sure you are too.
I've enjoyed spending time with you, but I know you miss her and so do I.
I'm excited to have her back.
She'll be picking up the sew-alongs again as soon as she gets settled.
Thanks for bearing with us during this transitional time and giving her the space to have this
time off.
I look forward to seeing you in other ways.
Until next time.