lily panel in frame, wood carving

Eternal Sculptures
211 followers
1 Video View·Aug 2, 2025
Hello, my friends.
I've got an idea to cut flowers.
I've glued a shield from a plasterboard.
What's a shield?
I've already made a frame.
Everything is ready.
I'm just starting to work.
So, less talking, more doing.
I'm starting to cut these flowers on the workpiece.
I've marked everything so that it would be clearly visible during the milling.
Otherwise, you can make a mistake and mill the flower or the vegetation.
And then glue it badly.
I'm going to go 12 mm deeper for two stages.
Each stage is 6 mm deep.
It can be 13 mm, but I'm counting on 12 mm.
So, I'm starting.
I've finished cutting.
And here, of course, there are nuances.
I need to cut in inaccessible places.
I will do this during the milling process.
I will use sandpaper to correct the faces.
I'm going to start the milling machine and cover it with varnish.
I'm making a filling to give the flowers volume.
To express them.
By the way, the filling also hides all the irregularities that formed during the milling and carving.
So, let's get started.
The milling, as well as the filling, took me a lot of time.
I finished it in two and a half hours.
I'm starting it all with an alcoholic liquor.
The color is chestnut.
Well, let's get started.
I'm not going to start the milling machine at all.
This is a nut. It is dark in nature.
It has an interesting color.
By the way, I have already started the flowers.
The color is pleasant to the eye.
The flowers seem to glow.
Interesting.
It looks like a frame.
The nut is lighter, the flowers are darker.
Such a combination.
Now I'm going to cover it with varnish.
And I'll show you what it looks like in the end.
This is what this panel looks like.
I think I did a good job.
I covered the frame with varnish only once.
I covered the flowers twice.
I wanted to do it again, but I don't really like the shine.
If I did it again, it would shine a lot.
I don't like it when it shines.
So who liked it, put likes.
Be sure to subscribe to the channel.
Good luck to everyone, goodbye.
