3 SITUATIONS that will make you CHANGE your tires early!

Car Tires TV
5 followers
#tire #195 #rim15
Blisters and cuts are the biggest problems you can face when it comes to tires.
Therefore, in this video I brought 3 situations to avoid or at least pay greater attention to your tires.
Hey guys, how are you? Marcelo here, from Fila da Mecânica.
Today I want to share with you three situations
so that you can avoid bubbles
or cuts on the side of your tire.
The rainy season is starting,
the holes, which are not few,
will increase,
they will get deeper and bigger.
At least here in my city this happens.
I want to share with you three situations
so that at least you increase your chances
of not cutting the tire,
of not damaging, creating a bubble
and having a loss.
You don't make that visit to change a tire
without being on time.
Yes, because you scratched the side.
Before today's video, I noticed a very interesting situation
that I hadn't analyzed yet.
The number of tires changed
from one unit only
and new tires
that were in good condition
was like 70%
of the total amount.
That is, many people
lost their good tires
that were in perfect condition
to run
and changing only one unit.
What does that mean?
Cut tires or tires that were
generated bubbles,
tires that suffered accidents.
First, as much as there are tires
with thick sides
and sometimes very hard,
this will not guarantee
that your tire will not generate
a bubble if you touch
the middle wire.
This is a habit that we have
to park close, very close.
Many times you take the middle wire
with some tip of stone
or even iron tip,
and you touch the side of the tire
and cut.
As much as your tire has an edge protector,
it is to protect the edge of the wheel.
It is not necessarily to protect the tire.
We know it helps.
Don't risk taking that famous fine
in relation to the middle wire
otherwise you can damage
the side of your tire and you will have a loss.
The second factor that will
cause damage to your tire and sometimes
even in your suspension,
which will not only be in the tire or wheel,
is that you pass in some hole
or any other impact that you
have on the suspension of your car
in a braking way,
so that the suspension is contracted.
The main factor
is that the suspension absorbs
the impact along with the tire
and not only the tire
with the suspension retracted.
From the moment you see a hole
and you see that there is no way to deviate,
the best situation, which is safer
to be done, is that you brake
before and let the car
pass free.
It's a little counterintuitive,
but it's the right thing.
Do not pass braked, do not pass locked.
This is what generates the most wheel recoil,
for example, that I take from the workshop
to be able to move the structure forward again.
It is because people have the act
of braking and hitting with the retracted suspension.
Then you have that
dry hit, damaging the tire,
damaging the wheel and many times
it retreats to the wheel,
generating a dent in the geometry of your car.
It is the shock absorber that can go away
in this situation, the tray, the wheel,
it can generate much greater damage
than just a hole in the tire
or simply your car
passing free.
And the third factor that will generate
a consistent damage to your tire,
not only the bubble itself,
but wear in general,
is the calibration of the tire
below the ideal.
The tire needs to have a resistance
to deal with this type of situation,
the weight, the impact against it
along with the wheel.
When you use this tire with the pressure
a little below ideal, this tire
loses resistance, not only in relation
to wear, but it gets very fragile,
it gets very soft.
This will make it easier for this tire
to present bubbles and tear
much more easily,
especially if it is low profile.
Sometimes the person wants to have a tire
a little more comfortable, leaves the pressure
10, 15, 20% below the ideal.
I will not even say that it will consume more,
that it will wear out faster
and it will also increase fuel consumption,
but your tire is extremely
susceptible to bubbles
appearing and cutting.
Three factors that if you avoid,
you increase your chances of running
with your tire and changing it
only when it runs out of rubber
and not having to make a visit
to the mechanic before the time.
In my case specifically, the two tires
that I lost were trying to park
much closer than I should.
Have you ever been through this?
Have you ever had this type of situation?
