In this video, we take on an Art Deco waterfall dresser that's already been refinished! We continue the furniture restoration / remake, while detailing how to freshen up vintage Bakelite handles. Learn about the history of Bakelite, which can be found in many antique, vintage household items and industrial applications as well.
CHAPTERS:
00:00 Furniture Assessment 02:40 How to Fix Drawers 04:50 Bakelite History 06:00 Repairing Handles 08:00 Fixing and Prepping Drawers 09:00 Custom Backsplash Creation 12:05 Enhancing Waterfall Dresser 14:45 Adding Inlay Wood 16:33 Detailing Wooden Feet 18:20 Spraying Lacquer Toner 20:00 Final Assembly 21:00 Before and After
Now this is a perfectly fine Art Deco waterfall dresser.
We purchased it in this refinished condition and it's about 80% there.
But it needs something special. It needs something more. It needs Bakelite.
The material of infinite uses. Born in a chemist's test tube into the fourth kingdom of primary
substances. Resinoid plastics grew up and were made useful in these extensive research laboratories
of the Bakelite Corporation. And here too they are multiplied and adapted to the future needs
of every industry on earth. This jet necklace madam is Bakelite Resinoid. We consider it equal
if not better than the natural mineral. It's beautiful and how light and so smooth and warm
to the touch. Welcome back to Montford Boulevard. Follow along as we work on this waterfall
Art Deco dresser while focusing on gorgeous vintage Bakelite handles. The finished dresser
is for sale in our store. You can find the link in the description. We really had a pretty good
head start on this dresser. You can see a few things like this minor sand through on the top
drawer. Also evidence of nails on the second drawer. It turns out that was actually part of a divider
system that somebody installed. It was sturdy and well built so we decided to leave it. This is the
only drawer that has dividers. You can see the trademark dovetail joints. They're in good condition
but could use just a little bit of cleanup work. But overall this is a handsome dresser that could
just use a few enhancements. You can see these glue drips we found inside a couple of the drawers.
It shouldn't be too difficult to get that off of there but it's definitely stuck on there.
On the back this is more of that writing that I've pointed out before. Again I don't think this is
sloppiness. I think it's just kind of to show that a human actually worked on this project.
I was looking inside that drawer with the dividers and could see that the bottom
is actually falling out of it. It popped out of the track there.
From the underside you can see where the nail came out so I'm going to pull that out of there.
It pops back in there but you can tell that that
board was actually cut just a little bit short. Get that nail back in there.
And now we're going to cut some reinforcement strips that'll be attached to the bottom of that
drawer. Do the second cut on the bandsaw here just like that. That'll be enough to give the
extra support that we need. Adding some wood glue here which takes about an hour to dry but you
really want to let it cure overnight for maximum strength. Once that first panel is dry we're going
add a second support just to make sure it stays in place there. And we're going to use the nail
gun to affix it. And with that this drawer should be even stronger than it originally was.
Feels good. Here we removed the existing handles which we'll save of course but we're going to
look through our Bakelite handle collection to see what works. Bakelite was the first plastic
to be made from synthetic components and it exploded in commercial and industrial use in
the early 1900s. Its applications are infinite. Sports goods, musical instrument parts, and toys
are well finished and cheaply produced as well as highly technical scientific instruments and apparatus.
Containers and bottle caps are now molded from Bakelite materials
as are many household requirements. These are the two styles we decided on for this dresser.
They aren't solid brass. They were plated and you can see that it's kind of wearing off so
these will need to be painted but that's okay. We are going to test the screw holes because
if you start working with these handles and then it's jammed up inside that can be a real problem.
But fortunately these are functioning just as they should. I'm going to clean off the
Bakelite. This really is a resilient material and it doesn't take much to get it back to its
original look. Just using some window cleaner and that's probably pretty close to what it looked like
originally. Still attractive. Now we've added black to the top edge of the Bakelite
and we sprayed gold lacquer on the metal handles.
Now after sealing the gold in gloss clear we're going to go back over with black.
You've probably seen us do this procedure before and then we remove the black using some French
lacquer and a 100 cotton rag. Just gives a nice antique sort of a look. So we're pretty sure this
is the actual material they're showing here that was used for Bakelite handles.
Transparent materials are produced from pure resinoid without the use of fillers.
They are cast in lead molds and converted into consumer products by machining.
And here bottom left you can see the amber color that we're familiar with. Now we're going to fill
the previous handle holes with some body filler. We're going to press it down until it starts to
bubble up and then we know it's all the way through the hole. We have a piece of tape on
the underside to stop it and that'll cause it to bubble up like that when you've gotten enough in
there. There's the tape. And shave that off and that'll be pretty easy to touch up. Removing
those glue drips. They take a little bit of work but it's very doable. Some of them needed a little
bit of sanding afterwards. So we're looking at the top of this dresser and decided it could use
a backsplash. This is a piece that we saved from something else that we worked on and we're thinking
this is going to work. Drew the lines on here and we'll get that cut off. Now we put it back in place
and we're going to round the edges. We're going to look to mimic the sides of the dresser for the
curve. Now we could use a compass for this but oftentimes I can find a cap that'll work just fine
for the radius. There it is cut off with the bandsaw and I'll use the sander to smoothen that
and get the initial curve. And this really doesn't take much work at all. First I'm going to get the
straight curve and then I'm going to come back and bevel the edge. See that's a pretty good start.
But looking at this we decided it's just a little bit too high.
We measured a few times and decided 5 eighths of an inch was what we were going to take off.
And so here it is just a little bit shorter now and that feels better. Now I'm going to work on
that bevel and we're going to take all of the original finish off. This is solid wood so we're
not worried about the veneer or anything like that and it is quality wood under here. Here we go
back to square one with that wood and I'm adding a natural stain first of all just to see how dark
this is going to go. It actually looks kind of close to the drawers but when you put it on top
you can see it's a little bit light for what we're going for. So I'm coming back in with a darker
stain. I believe this was antique walnut and that's starting to feel better.
Now we're going to add some black to the top of the backsplash including the beveled edge.
Looking at the main body of this dresser now and we decided it could use some accents.
We want to do something with this fluted corner trim. We bought this a while ago. This is actual
genuine inlay and we think this piece would go pretty well at the bottom. I'm going to add some
nutmeg stain to bring it to life a little bit and here we go. I'm going to test that out.
That looks like a pretty good match.
Once that stain is dry I'm going to spray some clear satin over top of it.
That's looking much better. You can see the tones kind of match the drawer there
and we isolated just the center three sections of that fluted trim. I'm going to make those gold,
just straight gold, no black antiquing. Now seal that with clear.
That is gloss and we'll peel it off. Get a first look at this.
You can see that's really kind of adding some character to the corner trim there.
Yeah that's feeling better already. Now we decided to get some of that natural wood back
on the feet here. It's kind of some thick black that we had to sand off of this.
There we go, looking pretty smooth and we're going to add some of that same
stain here. This was nutmeg gel stain. I sanded that area where the inlay wood is going to go.
Add some wood glue and sanding it will help it to grip much better. Just going to spread it out
a little bit and that's right about where we want it. Get some clamps and let that dry overnight.
Taking a look at that upper trim now and we are going to do that gold antiquing effect.
When you add the black you want to make sure you get enough down in the grooves but
not use too much because it does get tricky to remove it afterwards and it does take a
French lacquer to get this off. I need to keep adding it to my rag but that's about the look
that we're going for. Make sure we don't take the gold off, that's important as well.
Taking a look at that inlay at the bottom now and that's looking about what we were hoping for.
I'm going to seal the feet with satin lacquer. We do have an exhaust fan built into the shop
which really helps when you're working with lacquer but there we go. The feet are looking
pretty good but we decided we could use just a little bit more gold in this strip of trim above
Got that masked off and again we're going to do pure gold here not the antiquing effect.
Now we're going to seal and protect that at the bottom as well as the top because
furniture and product finishes demand gloss, luster retention, and durability.
Furniture and product finishes demand gloss, luster retention, and durability.
Taking a look at the bottom of the dresser now and we're going to call that good.
Unmasking the upper trim as well where we did the antiquing effect.
This trim goes between two drawers of course. I'm going to pop off these metal glides on the
bottom of the dresser and instead we're going to pre-drill and pound in some plastic glides,
nylon glides, which will help it protect floors better.
We are working on the top drawer here masking for toner that we're going to spray.
First we're going to clean off that drawer with naptha.
This is a degreaser and just a thorough cleaner.
So this is toner. It's lighter than paint of course. Just going to add a bit of a richer
color here. And again it's a checkerboard pattern that we're kind of going for on this upper drawer.
We've also masked off the bottom three drawers here. We are experimenting with
some patterns. Sort of a larger V effect which we are going to echo in the center of the drawers.
Here are those centers and we're going to make these triangles solid black. Probably normally
would have done this earlier but we are going to clean up the sides of the dressers just so
that beautiful dovetail looks cleaner. Now we decided to add one of those black
triangles to the backsplash as well. It's just going to mirror what's happening with the drawers
below. And we want to safely affix that backsplash so we've made this panel here.
We have stained it with nutmeg and we are adding screws. Here we go. Add a Montford Boulevard logo
on the back and we are ready to put the drawers back in and call this piece done. Fun to see how
far we came. Again this was a really solid start on this dresser but we wanted to punch it up just
a little bit with some accents. The gold really brings it to life, that inlay wood, but really
it's the Bakelite that is kind of the icing on the cake here and the star of the show.
Thank you so much for stopping by, for subscribing, and for interacting in the comments.
If you enjoyed this video here are a couple more you might like.
You're welcome back here at Montford Boulevard anytime.