How to Turn a 3-Year-Old Tree to 25-Year-Old Bonsai

Bonsai Ideas
277 followers
57 Video Views·Jul 31, 2025
So I share with you all my secrets.
Hi, I'm Milton Chang of Bung Zah Air Loam.
I mentioned this is my 25 year old seedling
that I got from an arboretum and I planted
when it got to a certain size, I planted it in the ground.
And I dug it up maybe five years ago.
And that's what it looks like.
You can see it's good all around.
And today I want to again show this side by side
to show what does it take to turn this tree into that tree.
So and the tools I need is nothing more than a growing pot,
a bonsai pot, my handy dandy clipper, a scraper.
This is actually a meat hook.
People use that to move big caucasus of meat.
But that's perfect for bonsai.
And it's inexpensive.
You can find them in a restaurant supply house.
And then that's a pruner.
And so this is a two and a half year old tree.
And then eventually I want to show you as I move it
into bigger pots and put it in the ground,
it will eventually get to that second thickness.
This is about I would say it's not quite a three year old tree.
So they try the maple grows pretty rapidly.
And I also want to point out
that the leaves are quite big in the beginning, like this young tree.
But you can see they reduce eventually when it's got a lot of ramification.
It reduces to this size.
You see how small it is?
Elm, Japanese maple, Trident maple, Selkova.
They all reduce leaf sizes, reduces to small leaves.
And that's why they are chosen, their choice bonsai material.
They've been proven to work over the years
so that you can have a big tree with the right scale of a leaf size.
So let me take this out of the pot.
I struggle a little bit to get it out of the pot because this soil is very clayey.
You can see this soil is very clayey.
That's why the plant is so stuck.
And yet the tree did really well because
Elm and Trident and so forth are very hardy trees.
They can overcome almost any kind of soil you use is good.
So you can use sandy loam, garden,
tough soil or whatever, and it should work fine.
But you can see this tree a year ago was no more bigger than this.
But now it's quite big.
And so they grow rapidly.
And I want to see the roots because the first step of a tree
is the roots, because if it has no good roots, it will never be right.
Because you can't change the bottom of the tree,
whereas you can change the top branches quite readily.
So you want to make sure the roots are coming out radially
like a tree that will be growing in an open space.
So if you look close up, you can see this is coming down
and then this one is coming out.
Not quite, but I think there's a little pink.
But eventually this will be OK.
We'll thicken.
And then on this side, you can see the roots
growing out radially this way and roots growing out radially here.
Typically it will.
If not, it will eventually will.
So the rootage is pretty good.
So now let's take a look at what we can do with this tree.
So, for example, you can see this tree has a little bit of a curve,
although I don't like this curve because it's kind of wimpy.
You know, it's kind of an arch.
You want it to be straight.
So what I'll do is I'll try to not break it,
but try to bend it a little bit so that it's straight.
You see, it's less curvy now.
And then what further I can do is if I clip it up here,
you see now it's totally straight.
You don't see the curve anymore.
So that's the kind of a trick you can use to to shave the tree.
So right now, for example,
I can imagine this tree to be this tall
with this being the apex.
And I can clean off
a little bit of that so they will grow out nicely.
It will heal.
So that would be a tree that if you look at this from this angle,
you can see it goes up, comes down this way,
and then this will come down and you will have a tree
that's a fairly standard in size, in shape.
Now, I like the tree to be like this.
So, for example,
you can see that
I need to manage these roots like this root is coming down nicely,
but then there's one going to the side.
So I'll clip this off
and maybe pull this one out so that it will eventually be a big root.
So you can see I would prefer more like this tree
where it make a turn, a much bigger, drastic turn than that.
And then another turn, another turn.
So with that in mind, then what I will probably do is the following.
I'll plant the tree this way.
So now the tree is going like like this and then start to go up.
And then I have to cut this off by saving some of these branches
for coming out to the side.
So you have to be pretty brutal.
You say, oh, my goodness, what am I doing to my tree?
Well, unless you do that, you're never going to get to your objective.
So I'm basically telling you that there are two ways to do this tree.
One is to kind of essentially this very minor curve.
The other one is to create a totally different curve
in a sense, a different design that's more akin to this one.
So now I will be very drastic, cut this off.
And this is not a very good cut because it's a stump
that would prevent it from heal over really well.
So I do it one more time to give it more of a slant.
Oh, leaving this little piece that will make nice and this will heal over.
And in fact, I should give it more of a cut like a slant.
I want to be very rough so that it will heal just as it broke naturally.
And then I'll cut off this little stump.
You can see this little handy dandy
clipper, which we will make available to you when we start selling products.
It's almost the only cutter I need for anything.
So you can see this is redundant.
I guess I can leave a loose bud so that it may shoot out in a right angle.
I don't know.
And then this one is definitely underneath the
the curve, so I cut that off.
And now this is a little bit of a wimpy curve.
So I try to straighten it out without breaking it.
You can wire it to to straighten it out.
But again, I don't need to spend that time
and worry about removing it to not girdle the tree.
And so I think that's fine enough.
I can eventually push it down.
In fact, I can do it now.
Now, I should cut it off here, but I cut it off here.
So they will grow a little faster.
And now I can see
these are all too much. I don't need them.
But I leave a little bud so it will grow out.
And same here.
The tree will come up like this, come this way and then come this way.
I can bend it up a little bit if necessary, and I cut it off here.
So that's the apex.
And then I want this branch to come out.
So I cut it off here.
This bud will come out.
So, OK, this is the first stage of turning this tree into this tree.
So the tree will basically be, let's say, a little bit this way.
So this is pointing up.
And then this is pointing down by pulling a little bit further.
Right. And then this will be coming up and that's built on that as it goes.
So that's how we'll put it back in the bonsai pot.
So eventually, I would say in five years,
this tree will be about this thick.
It's looking pretty close to this.
But if you like, at this stage, you can put it in the ground
or put in a much bigger pot, let it grow.
And in 25 years, you will have this trunk.
So that's the process of creating a heirloom master bonsai.
It just takes time.
There's no shortcut because it takes time for the tree to grow.
So you can see that's what I had to do to turn,
to make this tree, to begin the journey of this tree, to become this tree.
And so the question that's asked again and again,
should I put it in the ground or should I put it in a bigger pot?
I think the answer is that depending on how big the tree trunk
do you want it to be.
If you want a trunk to be a reasonable size, grow in a big nursery pot
so you don't have to dig it up again and disturb the roots
and start over again, so to speak.
But if you want a trunk like this size,
then you almost have to put it back in the ground
and then keep chopping the big branches as they grow.
Because you can have a long shoot coming up this way,
you know, 10 feet tall in the ground.
And that's that's why you make the trunk thicken very quickly.
So I share with you all my secrets to create this heirloom bonsai.
So you can see I straightened out this branch and tilted the tree.
So this is more or less pointing up at least towards that direction
so I can make a turn and turn and turn to build it up.
So using the clip and grow method, it really gives you a free canvas
that you can create.
You can add to it just like you do a painting to create anything you want.
And so the objective of this tree is to turn into this tree in 25 years.
And I think I'm not going to live over 100.
So therefore, my objective is to be shorter, to be consistent.
I'll probably shoot for this to be a very good bonsai in five years.
And I will do the follow on for you to follow
to see how the tree develops. Thank you very much.
With that in mind, I hope you enjoy this video.
And if you think I'm being I'm good at it in a sense, I'm being informative.
Please click like I enjoy the encouragement
and subscribe to our channel so that we can notify you of any new announcements.
Stay tuned till next week. Thank you very much.
