Late Roman Composite Crossbow Replica Video Rend

Exploring Ancient Crossbows
3 followers
6 Video Views·Jul 30, 2025
Late Roman Composite Crossbow Replica
Video
Rend
Here we have the reconstruction of a Roman armrest based on evidence from the 1st or 2nd century AD.
The interesting thing about this column is that the release mechanism is located at the rear end.
Unlike later pieces, i.e. medieval forms, where the nut is rather in the middle or in the front third of the column,
the release mechanism is applied with a relatively long trigger rod.
The arch itself is a so-called horn composite arch in a reflex shape.
This reconstruction has a rigid middle part, i.e. the arch does not move in this area where this winding is on it.
Only the two arch arms move or deform.
The design of the arch is based on classic composite arch shapes, i.e. we have a wooden core in the middle,
we have a plate of horns on the arch belly and the arch back is covered with teeth.
To protect against moisture, this arch is then covered with raw skin or treated with a veneer.
The armrest is tensioned in such a way that the shooter puts the armrest on the floor,
pushes the arch down with both legs left and right of the column and pulls the tendon backwards with his hands.
This reconstruction has a pulling weight of about 50 to 55 kilograms depending on the weathering,
because the arch changes its tensile strength according to the weathering ratio.
A second variant of the tensioning process would be that the shooter sits on the floor,
again holds the arch with his legs left and right of the column and then tenses the tendon with both hands.
As I said, the trigger mechanism is like this, in this form of wood,
grabs the whole width of the nut, these two nut fingers hold the tendon
and when the trigger is pressed, you can simply do this with one hand, then the shot is released.
