✪ My Power Tool Buyer's Guides: https://woodandshop.com/woodworking-p... ✪ 58 Second Moravian Workbench Assembly: • Incredible 58 Second Portable Moravian Wor...
Affiliate disclaimer: When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission.
Hi, I'm Joshua Farnsworth and in this video I'll talk about five features
you should consider when building or buying a workbench for woodworking.
If you're watching this video then you're probably considering making or buying a workbench for
your workshop. I've built a lot of workbenches over the years including most of the workbenches
here in my school. So I'd like to take a little bit of time and share my opinion on
five features that I feel are important for woodworkers to consider before building or
buying their own workbench. And I'd also like to dispel some commonly accepted
dogma about workbench construction. And before I get started I want to let you know that
this video that you're watching goes along with my very popular tool buying guide articles.
I'll share a link below this video to my guide on choosing a workbench design.
My tool guides have a lot more detail than I have time to share in videos. And also in my guides I
mention specific brand names and models of tools that I prefer which I don't like to do on videos
so much because my opinion can change and it's hard to change videos. A lot easier to change
articles. I'll also be making videos for all my other guides on buying hand tools and power tools.
So if you subscribe to my YouTube channel down there you'll be notified immediately when those
videos are released coming up here soon. All right so let's jump into the five features
that I consider to be the most important when choosing a workbench design. One of the most
important features to look for in workbench design is sturdiness and stability. Hand planing
and sawing on a cheap and flimsy workbench will become frustrating very quickly as you're you find
it your workbench is moving and shaking across the room. In most cases sheer mass and weight are
usually the solution for a sturdy workbench. Along with solid construction with good wood joinery
like mortise and tenon joints. You can see how a beefy workbench like this Roubo style workbench
has a massively heavy top and thick heavy legs. A workbench like this does not move easily. Trust
me I wish I'd taken a video of the of me flipping the beast over and back during this construction.
You would have had a pretty good laugh although I wasn't laughing at the time.
So the Roubo workbench style is one of my favorites. I think it looks really nice with
the dovetail joint there and the thick top. But the tops on a workbench like this are usually
five to six inches thick. But a workbench top with three to four inch thick top will
usually provide you with the mass that you need. I've found a couple commercial workbenches that
are sturdy enough for hand tool work but surprisingly not many. I've listed the
models in my workbench guide for you to check out. But what if you don't have a suitable place
to use a massive workbench like this? And what if you want a workbench that can be transported
to a job site or a craft fair? Does that mean you have to sacrifice stability? No. That's where the
ingenious portable Moravian workbench design comes in. This is probably my favorite workbench design.
The Moravians were a religious sect in the 1700s up to modern time from Moravia. But they designed
this portable yet sturdy workbench in the 1700s and the folks at the old Salem Moravian settlement
in North Carolina have resurrected the design. The angled displayed legs incredibly keep this
workbench from moving across the room when I'm hand planing which is really nice. The workbench
can be assembled in or disassembled in under a minute. In fact you should check out the video
that I filmed of Will Myers where he assembled one of these Moravian workbenches in under a minute.
I'll put a link below or it'll pop up here somewhere. Because of its lightweight once it's
taken apart the Moravian workbench can be transported by just one person. I've made both slab
tops and laminated tops for my Moravian workbenches and I like them both and I find that I can
pretty easily carry all of them. They weigh probably around 70 to 90 pounds each and the
undercarriage parts are made of lightweight wood but they're still sturdy because of the strong
joints and it's nice because you can save money not having to spend money on an expensive wood
for your undercarriage. I had one person email me to tell me that he built a Moravian workbench
which he now transports up the elevator in his high-rise apartment in New York City.
So it's a pretty cool and versatile bench. Will Myers my friend drew up some free plans for the
Moravian workbench which you can get on my workbench guide that I mentioned earlier.
And because this is our favorite workbench design Will and I also made a seven hour video tutorial
on making this workbench using hand tools. It's geared towards beginner woodworkers but
anybody will find it helpful. You can purchase the DVD or the high definition download at my store.
I'll put the link somewhere here. Some of my friends really like their English style workbenches
as you see here and I do like some things about this style. Like they have big aprons for
flexibility and holding your workpiece with a hold fast and they usually have nice legs and nice vices
and also they're pretty fast to build and pretty affordable to build. However one drawback that's
kept me from building one for myself is the thinness of the top which doesn't feel as stable
to me when I'm pounding on a joiner's mallet. And I also the biggest problem for me is it's also
super loud because of the echo that's caused by the vibration of the thin wood and I just couldn't
have 10 workbenches here in my school with tops like that or I'd be deaf in no time at all who
would echo off of the walls. But if you only need one workbench it's not a bad option. The next
feature I'll talk about are vices. Vices are used to clamp your workpiece to the workbench so you
can plane, saw, or shape it in a number of ways. One or two vices are usually sufficient for a
traditional workbench. Some very traditional woodworkers sometimes like to have one or even
zero vices like people who are building a reproduction period rubo workbench. But I prefer
to have two vices myself and I place them into two categories. A face vice points toward the
furniture maker on the face of the workbench and a tail vice is attached to the end of the
workbench. And just so you know other woodworkers may have different terminology than me for parts
of the workbench which is okay. So let's talk about face vices. There are a few different styles of
face vices. The first style I'll talk about is a leg vice. A leg vice is one of the most common
traditional vices that you'll find on antique workbenches. And this type of vice is attached
to the front leg or a board that's attached to the front leg and it's tightened down with a wooden
or a metal screw and a handle. A parallel guide with a metal pin keep the vice from racking or
stretching too far to where it can break. This is my personal preference for a face vice
because there's so much room to clamp wood without hardware getting in the way like on some other
vices. And I really like using historical wooden screws on my vices. Of course you can check out
my workbench guide for some companies that make really popular metal hardware for leg vices.
There's some pretty cool ones out there. Shoulder vices were very common in continental Europe and
they have a wide unobstructed opening that works great for cutting dovetails on wider boards. This
type of vice is more complex to make but well worth it if you can take the time and to learn
how to make it. This is the style that some of you may remember that Frank Klaus made so popular
on his workbench that he released years ago and I think it was in Fine Woodworking Magazine.
This next style of vice has the same name as the category that I'm discussing.
I simply call it a face vice. It's another very traditional European type of workbench vice.
This vice is usually the same thickness as your workbench top and clamps against the top with
either one or two screw arms. A drawback of this style of vice, in my opinion, is that the screws
get in the way of clamping wider boards. Also if you clamp a board in the side of the vice
you need to use a spacer of some sort to keep the vice from racking.
There have been some modern designs that have slightly improved upon this design
which I'll mention in further detail in my article. Cast iron vices came about during the
mass production era of the industrial revolution and they're typically bolted to the bottom of a
workbench top and wood is usually added to the vice jaws to offer protection to a wooden workpiece
because you don't want metal crimping in on your your wood. While this is a strong style of vice
it doesn't have the traditional look that many woodworkers prefer when they are building a
classic style of workbench, but that may not be very important to you. You may not care.
I have mine bolted to the workbench in my garage, more of a flat workspace.
Auxiliary vices, as I call them, are vices that can be clamped to your workbench top, even to a
tabletop in your house or a door if you're, for example, you're waiting to build a workbench and
you don't have a workbench. Now this type of auxiliary vice with double screws is often
called a Moxon vice because the design was featured in Joseph Moxon's book that he wrote
in 1703 called Mechanic Exercises. So I love this style of vice for dovetailing large boards
predominantly because it has such a wide space between the wooden screws, or metal screws in
some cases. 24 inches I believe is what mine is, and it can even be raised up on tall blocks to
prevent bending over and have a back string. Now let's talk about end vices. End vices are used to
clamp a workpiece between bench dogs. Bench dogs, if you don't know, are the pieces of wood or metal
that stick up in the holes in these dog holes. And I divide vices into three subcategories. Again,
this is my terminology. The first style of end vice I'll mention is a tail vice. Like all the
end vices, a tail vice moves a bench dog to clamp a workpiece along the length of the workbench.
This type of vice also allows the woodworker to clamp a vertical piece of wood between the
wooden vice and the cutout section of the workbench top, which I think is pretty cool,
and it's a pretty fast way to work on a small piece. A wagon vice works similar to a tail vice,
but rather than the entire enclosure moving, just the bench dog moves in an open recess that you
cut in the workbench top. This is a much simpler vice to install than a tail vice,
and it's the style that I use on most of my workbenches. Doesn't take long to install at all.
An end vice, part of the category with the same name, is just like a face vice, but it's attached
to the end of a workbench. This type of vice can be useful because it allows you to tighten boards
between two rows of bench dogs rather than just one. This is helpful if you plan to work on really
wide projects like doors or a really wide board, but like the very similar face vice, it does
require a spacer to keep the vice screws from racking. Also, I don't find that I've hardly ever
used the the two dogs at one time. Another important feature to have on your workbench
is legs that are flush with the bench top. This will allow you to clamp long boards or doors to
the face of your workbench. A lot of commercial workbench makers, sorry to say, seem to have not
done their research, and they manufacture workbenches with tops that overhang the legs.
If you've already got a workbench that doesn't have flush legs, don't stress out and go get a
spacer board against the workbench leg, attach it somehow, and that should work. So what is the
proper height, length, and width for a workbench? There's a lot of people who will tell you exactly
what size is best or exactly the rule to size your workbench, but I'd like to tell you that
it's all a matter of personal preference and what you plan on doing on your workbench.
So what do people say is a proper workbench height? I've heard many times that the workbench
should come to your knuckles when you're standing straight up. I'm not sure who made up that rule
of thumb, but the ideal height of a workbench totally depends on what's comfortable to you,
and it depends on what you're going to be doing on the workbench.
I personally like a lower workbench like this because I do a lot of hand planing,
and I find that I get a lot more power with so much of my body mass leaning over the hand plane.
I find that it's also easier to see what I'm doing when using molding planes,
when I need to look at the spring line, or I need to look at the molding that's
coming about, or using a rabbet plane, or something like that.
Yes, at six foot two inches my back can get a little tired if I'm leaning over with a lower
bench to cut a bunch of joints, but most of the time it's just fine to be honest.
And if, for example, I'm cutting a bunch of dovetails, I can just clamp my mox and vise
onto this workbench under some blocks to raise it up, or I can sit down. Problem solved.
The length of a workbench can vary considerably too, and it largely depends on the space that
you've got to work with in your workshop or in your house. Most of my larger workbenches
are around eight feet in length because that was the most economical use of lumber,
or how the lumber came cut around that length. These Moravian workbenches, on the other hand,
are just over six feet long, and I rarely find them to be too short. If a long board won't fit
between the bench dogs, then you can just find another method to hold the board. There's a lot
of ways to clamp a board to your workbench. What about the width? I've heard a lot of
woodworkers say that it has to be 24 inches wide. I just find that that's not true. While I do often
like a nice wide workbench, I usually base the width of my workbench off of the material
that I have available. For example, this Rubo workbench is 18 inches wide, and this other one
behind me happens to be just under 24 inches wide. So why did I choose those sizes? I didn't.
That was just the size of the slabs that came out of the trees, and after I was finished squaring
up the boards, that was what they were. A conventional woodworking dogma would say that
this Moravian workbench top is way too narrow at 14 inches, but in reality, the majority of
hand tool work that I do takes place within the first six to eight inches of the edge of the
workbench. If I want to do assemblies or glue-ups, I can just throw a piece of plywood or subflooring
or something on top of the workbench top, extending here onto the tool tray, and that'll give me
place for dripping glue onto as well. So it works just fine that way.
Now I'll touch on a controversial topic of tool trays. Some people love them, and some people
absolutely despise them because they say it makes a mess. I like benches with tool trays,
but I also like benches without tool trays. I have multiple benches with and without.
My workbenches that are full width also have a space underneath to store my tools,
so that's not a problem. But these Moravian workbenches have a really great removable tool
tray, and it lets you store your tools, and so it doesn't get messy. These actually pop out,
and you can dump your shavings on the ground when things get messy. Just don't dump your tools out.
If you don't feel really confident in your woodworking skills yet,
then I'd like to suggest a really simple and affordable workbench.
This French-style workbench is made out of southern yellow pine from the hardware store.
Yellow pine is a harder softwood and works great for any workbench under carriages,
and it even works fine for workbench tops. That is, if you don't mind that it looks like
a workbench and not a fine table. You know what I mean.
I buy the 2x12 construction lumber from the hardware store, in fact a big box store,
but it has to be the 16 foot length boards, because mills use the best quality trees
for those boards. Just don't make the mistake of buying pressure treated lumber.
You don't need an outdoor bench. Also, I've found that the people at the hardware store
are more than willing to cut the boards in half to make it easier to get them home.
16 feet is kind of long for anybody's truck.
Then I just rip them in half on the bandsaw to get a nice quarter sawn lumber, and I mill my
parts from that wood. After that, it's just a matter of laminating the top with glue and doing
normal mortise and tenon joinery, which you can see how to do that if you're not familiar
with one of my past videos. I'll link to that below this video.
That's probably about as much as you can handle sitting and learning about workbenches at one
time. Like I said, you can find much more advice on the accompanying workbench guide.
The link is below. If you have any questions about workbenches or workbench construction,
please leave a comment below and I'll try to answer it. While you're down there,
this isn't tough, just give the video a thumbs up if you liked it. Make sure you subscribe to
my channel because in the next video, I'll show all the different workbench fixtures and accessories
that I use here in my school like this. I'd like to say thanks for hanging out here at my shop.
This is Joshua Farnsworth. If you're interested in woodworking with a mix of hand tools and power
tools, visit my website at www.woodandshop.com where you can find a bunch of free woodworking
lessons, workshop tours of amazing woodworkers, and our very popular tool buying guides.
You can ask questions and share your projects with thousands of woodworkers on my forum. Enjoy!