**We may receive a commission on purchases from these links - at no cost to you! Thank you for supporting our channel.
In this video, we completely restore and refinish a 1930s Art Deco bookcase This rare piece of furniture features side waterfalls! It's a wonderful throwback to the roaring 20's and Art Deco of the 30's, when architecture, furniture and fashion often times intersected. This Art Deco furniture restoration will hopefully help with those interested in DIY furniture flipping.
Comments are disabled for this video.
Welcome back to Montford Boulevard. Today we're working on a handsome Art Deco bookcase that
deserves a second lease on life. We'll start by using traditional methods to restore and refinish
what was already there. We'll also employ a few modern techniques as we upgrade and expand upon
the original aesthetic. Follow along for another exciting step-by-step Art Deco furniture
restoration remake. The first thing we noticed with this piece were the waterfalls on the sides.
You don't see that very often. Waterfalls were such a trademark part of Art Deco furniture but
to see them on the sides like this is kind of a rare treat. The wood was in really good condition.
Needs to be cleaned up but that probably can be saved. The mechanism on this door was working
well which is always a nice bonus. We can keep that intact. These shelves were nicely cut but
oftentimes we'll have glass shelving cut to replace them so we're considering that right now.
The drawers work well enough. You can see the trademark dovetail joints. Definitely need to
be cleaned up but that's very doable. On the inside of this drawer somebody had left some
tea lights behind. Kind of interesting tea light candles. This is a drawer stopper. You can see the
nail was bent over so that never really went in properly. The left one is still intact so this
will be really easy to put the right one back in. Looking in the lower compartment and needs to be
freshened up but nothing really too concerning in there. Somebody had done some black and gold
accent work which is interesting. You can see the paint ends right there. We like to do the same
oftentimes and it was nicely done so we are going to keep some of it and we'll remove some later on.
Now this corner was broken but it seems like all the pieces are there. Maybe just knocked in a bit.
These are not original handles. Not Art Deco handles. You can see some very attractive inlay
wood here that's genuine inlay and carefully chosen veneer on the front. Very attractive.
Some more of the black and gold accents at the bottom. It runs all the way up the sides of the
waterfall and to the top as well so we're going to decide what to keep and what to remove.
The back side has that rustic wood like you always see with Art Deco furniture and you can
see the pencil math work probably from the mill department when they were cutting the wood.
It's funny they always leave that on Art Deco furniture. But again the condition is really
solid for this piece and it's probably savable the veneer on the outside. Have it back in the
shop here. We just gave it a good wipe down and you can see again the mahogany is looking very
clean. A little bit of touch up here and there but we're probably not going to sand and refinish that.
We're trying out some handles here from our collection. Not sure yet what we're going to go
with but we're just testing this out. This is vintage Bakelite. These are probably 1950s
kitchen cabinet hardware we're guessing. These handles. You Mr. Clean, he's mean. He hates dirt.
Get these things out of here. You can see somebody added modern screws to these hinges here.
Kind of loose. The bottom ones are original but all of these will need to be cleaned up so we'll
remove all of the hardware. Jump right into some sanding here. These columns on the front we want
to go natural wood on those so just got all of that sanded clean. We'll address that later
and we'll get this washed out really good before we go any further.
And right away look how that cleans up. That was really encouraging to see
and some pretty dynamic grain in the bottom of this piece. There is some sort of resin dripped
all over the inside of this drawer so before we add some finish coat to it we're going to
scrape that off. Give it a good sanding too. We have these drawer fronts laid out here looking
at the front of them. You can see a little bit of cracking as you look closely. This might have
been exposed to sun this side of the piece. Before we sand these are burn-in sticks and
there's the burn-in oven. We're going to do a little bit of a repair on the edge here where
the veneer was chipped off. Found a color that matches pretty closely and this will just be a
head start for the touch-up. Blends right in there. Jumping in with the orbital now. This is a thick
enough quality veneer that it wasn't too much of a concern sanding it. Look at the drawer fronts
looking very attractive already. You can see the book matched effect both horizontally and vertically.
We're going to go to the buffer wheel now. Use the wire wheel to remove the coating on these hinges.
Enough of it was chipping off that we're going to redo the gold on it using lacquer.
These are the shelf clips. See look at how fresh that's looking already. We'll coat them with gold
lacquer and then with a lacquer top coat over top of that. Looking at that corner we mentioned earlier
and you can see that that piece sure enough was just knocked in there and there's a bottom piece
of thin wood that's holding it in place so I'm just going to use my scraper to pop that back out
and that went right back in place there. So just a little bit of glue mixed up some two-part epoxy
here. Put that both in the bottom and in the crack on the upper portion as well.
Clamp that in place here and that'll dry within just 10 to 15 minutes.
So first we're going to address this trim on the front and we do want to add some color here
but actually right away we're going to get into the staining on the drawer front.
This is just a natural oil-based stain. There's so much color and character in this wood that
we really don't need to add anything. Looking so fresh and clean there. Same thing on the
fronts of these doors and look at that burled wood just glowing through. I love how it contrasts
those vertical lines in the other choice of veneer. Looking at the insides of the doors now
again some really dynamic grain and here's with a couple coats of satin lacquer so we're kind
of getting a head start on the doors and the drawer fronts. Looking at the inside of the
main compartment now I've given that just a rough sanding and we've got a lot of the trim clean
ready for some choices there. Lower compartment as well. Coming in with some black paint now we're
going to brush it for the interior just to darken this a bit and we picture this as a display cabinet
for plates or wine glasses or maybe a curio cabinet. So we're trying something new here.
These are pieces of waterfalls that we had left over and I chopped them up into a couple pieces
and what we're going to do is actually mirror the sides of this piece and we're looking at
building a crown for the top. Just doing a little mock-up here just to kind of continue that
cascading waterfall fountain type look. We've mocked up a backsplash as well
but that's the general idea there. So now we're starting to put this in place. I've put a bottom
base on this attached it with screws and glue. I'm going to try it out on the top there. We've
seated it back just a little bit so that it's not too prominent but you can see it kind of just
continues with that same form on the sides. Gluing in a center piece here just to make this
solid complete the shape. Working on the door fronts here while the glue dries simultaneously
on the other piece we need to fill in the previous handle holes and now we've touched them up.
Make sure they disappear. This is on the insides of those doors. Using the lacquer powders
a little bit of graining work. These are the handles we're going to go with and these are
actually modern handles designed in an art deco aesthetic. More on that later. This is that top
crown piece. Got it clamped and I've put a support on the inside of it there just to make sure that
thing stays together. I'm going to use some bondo now just to fill the crack. This is all prior to
sanding of course. So here we go I've sanded it clean and now we're going to add a couple
different colors of stain to get the effect that we're going for. First I'll just again put it in
place just making sure we like the feel of it. Working on the insides of these drawers now with
some clear shellac and the stain on that crown as I mentioned. First a little bit of antique walnut
it's a good base color. It's looking good but you can see the wood behind we want a little bit of
orange in there as well so we'll let that dry fully. Then we've got some dark mahogany stain
over top of it and that's closer that's more what we're going for. You can see it kind of fits
the natural color of this piece better. Working on a piece of wood for a backsplash now.
We really like the different veneer choices in this piece and we're just laying out the template
for how we're going to cut it and there's the centerpiece of that crown where it's going to
fit into the back of it. Just marking out center making sure our shape is good and here it is cut
and the edges are sanded. I used the band saw for that. Now it's time to sand it
looking nice and clean. We love the different angles of the veneer in this piece. Same thing
do the two different layers of stain and here's the effect. Just a little bit of an orange glow to
it and we're actually using a shadow toner on those edge pieces of veneer just to give some
separation and make it pop a little bit more. Our deco is so much about geometric shapes so we
really like to emphasize that and we're going to add some golden rays almost like a spotlight
shining up at night. Looking at this trim at the bottom now and we're going to give that the same
treatment. Actually get a mask for all of the trim. You need to really consider the order
in which you approach these things and how it's going to interact when you're peeling off tape.
So on and so forth but we're going to start with black lacquer actually and this is how
the last artist had designed this piece. We're just going to redo it to freshen it up after the
black is done and sealed. We've got that masked and now we're going to add gold lacquer on these
verticals. It kind of brightens it up. It's always fun to see how the black and gold just pop off of
each other. Very common colors in art deco furniture. This black and gold, the horizontals
there, that is original to well the last person who owned this. That was their choice. Now it's
time for stain on the lower portion. These columns were partially black previously. See that first
coat is just a little bit too light so we're going to come back in with the dark mahogany stain
gel stain and that's the effect we're going for. Now it's time to freshen up the bottom
of this piece. Looking forward to seeing that color come back in just with some natural oil
stain. Plenty of life there. We had noticed that the bottom corner of this was chipped off so
we used bondo, just traditional bondo, to fill it. They do make one for wood. We like the original
formula. Sands very well. Got some french lacquer here and you can see the brush was a little crusty.
When you're using lacquer powders you can actually revive these brushes and bring them
back around pretty easily, which is nice. Gonna add some brown and a little bit of orange to just
get this base color. Now this is a french polish technique. A little bit of lacquer french on a
bottom. So these are the insides of the doors and we have a shape we masked for that actually
references the waterfalls on the sides of this piece. Like so. Again that's the insides of these
doors. You'll only see that if you open them up. And we now have this piece laid on its back and
we're looking at the back inside. For that we have this black peel and stick vinyl with a really nice
wood grain effect. We really like this product. We use it oftentimes for the insides of drawers
and it's just going to give a nice clean fresh look for the background inside this bookcase.
Like so. Looking at the bottoms of this now, the feet, these metal cleats, we're going to get rid
of them. They can kind of damage your floor and they're also pretty worn. While we're at it I'm
going to clean up the feet here. The black. And we prefer these plastic glides. Nylon glides
actually. I'm going to pound them in. Safer on the floors and it really helps make it easier to move
these pieces. Another look at these handles here. We really like this effect. Easy to grip. Such a
nice geometric art deco shape. Designed a template here just to make sure we get the screw holes
perfect. Make sure we have them centered properly. This is a shelf to go in the bottom compartment
and we're going to stain that. Just give it a black. First we tried ebony oil stain actually
and it was not as dark as we were hoping for so we're going to black gel stain instead.
There you go. This was pine but you can see how elegant that looks with some stain.
Now this is the upper glass door. I'm using naptha to clean it really thoroughly.
And the inside edge looked a little rough so this is actually pin striping for vehicles
so it sticks really well. And we just want to clean up the inside frame with that.
Like so. That's stuck right onto the glass and it's it's really adhering well. This is the inside
of that door. Now we made a couple of designs. This is in Adobe Illustrator.
Frank Lloyd Wright inspired and this is a corner shape. We're going to make four of these. And this
is for the front of that crown on the top. And what we're doing is bringing out our laser cutter.
We're going to cut these out of five millimeter thick wood. I'm using the frame mode here. The
you can see it shining on the wood just showing us the work area where it's going to cut.
I'm going to hit the start button and the laser will go to work.
Close this up here and we do have a nice exhaust system that draws that smoke out.
But we have the door to our shop open as well just making sure we blow the smoke out of here properly.
Checking on it. The design looks great but you know what I realized? I did not properly set
the distance of the laser and so it almost cut through. You can see the light leaks but not quite.
That's what this handy tool is for. You can see exactly the distance you need with the laser.
So I set it up properly the second time. Ran it again and this was exactly what we were hoping
for. Look at that. Pops right out. Perfect. I set that in place and that's exactly what we were
hoping for. I also cut two corners out of this one piece of wood. We did that two times because
we needed four of them. But look at that. Cuts perfectly. Came out just like we were hoping for.
And if you look closely there are no burn or scorch marks on the face which is very impressive.
I've got the corner pieces in here. I'm going to add just a little bit of personality to the
of this door and we have painted them gold. Now I've added tape to protect the glass and we've
sanded the edges of this trim here so that the glue will adhere better. We're going to use a
two-part epoxy. Now with the front lattice work for that crown, just the edge is going to go black.
A couple coats of black. Let that dry and I've masked off for gold about the same thickness as
the rest of the design. Here's how it turned out with a couple coats of satin lacquer over top.
Look at that. I'm not sure how else you could do that besides using a laser cutter. This is a
backer plate to go behind that lattice work design. Look at that. It's almost like clouds.
Very nice grain pattern there. I'm going to add some black lacquer to the edge here as well.
Lacquer powders with black french. There you go. Looking smooth with a coat of satin lacquer
and there they are sandwiched together. That's a nice effect. So here we go putting the gold
handle on. Previously that was kind of a dull silver. I had coated this shelf with lacquer and
it felt just a little rough to the touch. When that happens you can use 4-0, that's four zeros,
4-0 steel wool. Just give it a light buff and that'll take care of that. I'm going to wipe off
all of the dust here. We then vacuumed it. Add just one more coat of lacquer and it was nice
and smooth afterwards. Here we made a support for the shelf. I'm going to add just a couple of nails
to hold it in place. Positioning the crown just to see how it looks and we're going to drill in
from the inside, from the underside. Put some one inch screws in there. I used a recessed bit
just to sink it down in there. We used four screws. Now we're going to use some of that
same black paint and we're just going to use a q-tip to dab it in there. We do want to leave
access to these screws just in the event if anybody ever wants to remove that crown they
have that option. So we're going to make it disappear just enough in there. There's how
it dried and that'll look just fine. This is a pretty slick LED light that we purchased from
Amazon. It actually has a dimmer switch. This is going to go on the inside upper portion of that
cabinet and you can see the dimmer working here. Very nice effect. It came with some two-sided tape
which is very handy. Just like that. So again, easily removable. We're going to stand this up now.
We drilled a hole in the back of it you can see for the wire to stick out so you can plug in that
light and starting to come together. We got the clips back in for the shelving and we did order
custom cut glass. I'm going to spray some lacquer on the inside. Furniture and product finishes
demand gloss, luster retention and durability. You want to make sure you have proper ventilation of
course. Adding our custom shelf that we made. It was just such a large compartment we think that'll
make a better option for the lower portion. This is felt we're going to add before we put the glass
shelving in just for protection. And there you go. Looking a bit more modern on the inside there.
Putting the drawer back in and looking at those handles how well they go with this piece. We're
very happy with that choice. And adding the screws and the hinges. We did have to add a couple more
screws. Finally putting the upper door back on and with that. All right Mr. DeMille I'm ready for my close-up.
We really enjoyed working on this Art Deco bookcase. It had a lot of personality to begin with but
we like to just kind of turn up the volume on the Art Deco aesthetic. Recently we've had a couple
pieces that sold right away so do check out the link below if you're interested in purchasing this.
We do offer free shipping domestic United States. Thank you so much for sticking with us to the end
and especially to everybody who likes, subscribes, comments. All of it does help our channel.
If you enjoyed this video we've got another one here that you may also appreciate.
We'll be back again soon with more Art Deco furniture
and you're welcome back here at Montford Boulevard anytime.