Handbuilt Pottery Bowls!

Ceramic Art Studio
35 followers
1 Video View·Jul 28, 2025
Hi Pottery Peeps. I'm back in the studio. I'm going to show you how to do a hand-built bowl
using one of Sharon's molds that works with the bat system I showed last week where I threw bowls.
I do apologize for not having this up on Saturday. It's just been one of those weeks,
you know, so all you can do is bounce, right? So hopefully we'll get this up on Sunday,
depending, you know, if everything works. So I also have one of her, hold on, what they call these,
rim templates that I plan to do with this. And so let me, I've already rolled out
a slab of clay at 3-8. B-mix is what I'm working with. And we'll see how this works. My first
attempt at this bowl wasn't a good one because I let it dry too long without taking the mold.
And then I actually had to cut the bowl off the mold. So that didn't work. So hopefully
we'll have better luck this time. All right. So putting that little doohickey in there.
And then this little doohickey. There's a lot riding on this little. All right, so we're all
down. And I really love this. I've got this big flat bat system here. So I won't get any
lines or anything. I won't mess up my rim. And then I do have, let me get my slab. I brought it over
on another bat. So here's my slab. So I'm going to set it in front of me here.
And then I'm just going to pick it up and drape it over the mold.
And then you want to carefully, you know, lift these guys up. In fact, I'll probably take some
of this off just so it's a little easier to mold. Keep that for foot. All right, so we took some of
the clay off. And then I'm just going to spend some time and gradually mold or press this against
the mold, trying to eliminate wrinkles. So this does take a little bit of time just to finesse
around here. But I love that you can do this on the wheel with the bat system.
And I'm not pressing really hard because I'm trying to not get any holes in the bowl.
I'll take some more of this clay away.
Okay. And I'm just pressing in with this part of my hand just to get it around the form.
So then I am just going to take the red rib and then just smooth over. Make sure that's all down.
See, I think I'm going to bring this one in.
I'm going to bring this red one in to smooth any marks I might have left with my fingers
or with the rib. Okay, I am going to come in with my needle tool.
I want to find where my bat is or where that rim template is. I'm just going to
come in. I think I'll just, now I can see it. I'll just follow along carefully with my
needle tool here. I'll probably go around this twice just to make sure I got a good
And I'm actually going to take my fingers into, if it's going to crack, it's going to crack
right here. So I want to kind of compress that so it'll help eliminate
it wanting to crack there. I might have cut that wrong there. What did I do?
All right. This is one of my favorite MKM
tools. Actually, you know what? Before I do that, let's go ahead and put a foot on here.
All right. I'm going to go ahead and do a foot, and I'm going to do a foot that's a little bit
different. So here's a cookie cutter that is the width of my foot or the diameter of my foot.
And I'm actually going to go ahead and cut that out. And we're going to go with the,
this is, I rolled this one out about a couple of ticks above 3 8ths, a couple little lines.
All right. So now I've got my foot. So let's go ahead and score for a place for the foot.
And I'm just going to score this. I don't have a paintbrush. I'm just going to squeeze some water
and then carefully so I don't stretch this out. What I like about doing a foot this way is that
I don't have a seam. Push that down. And then I'm going to round it out with the help of the wheel.
And then I'm going to actually throw a foot. Make sure that I got a good connection here.
I don't want it to look like I placed a foot on here. I want it to look like that it was part of
the, like you threw it this way when you trimmed it. So now I'm going to just hold it in place,
kind of squeezing it a little bit. And I'm actually pushing in here with this finger
because I want this foot to kind of flare out a little bit. Make sure that it's all connected
really well. It's really connected well there. I'm pulling that up just a little bit because I
want to cut it off. Then coming with my needle tool and then I'm going to soften that. I'm
actually going to flare it out just a touch. And then there's my foot. And since we have it on here
let's add some decoration. This is one of my favorite MKMs. So let's put a band
around. Let's see, do I like that? No, I don't like that. Well the nice thing is if you don't like it
hoping that I could, since I can press against this, maybe I can get a good coverage of this
stamp. So I've got that mold in place. Oh that's cool. So let's see. I'm just rocking it back and
And while I'm at it, where is my maker's mark? And I will go ahead, I can press right against
the mold which I like so I can do my maker's mark. Move that up just a touch. And then I'm
going to set this out and let it stiffen up. I just got to make sure I don't let it stiffen up
too much because I got it too stiff last time. So we'll be back in a little while.
Okay it has sat here for about an hour. I'm going to love this about Sharon's molds
is that they're fairly easy to get a little wet. There we go.
We've got that out. And then all I need to do now is clean up my rim.
And again I'll come in on these little points that come in with my finger.
Actually still pretty soft here. I probably could have left the mold a little bit longer.
But here we've got a bowl with nice little details on the side and the rim. That was
fairly easy to do. Anyway, cute. Cute, cute, cute. And what's really nice about this mold
is that I can make bowls that are exactly the same shape. So anyway that's a really easy way to do
a hand built bowl. Okay so that's it for me today. Go get muddy and I hope this was helpful and I
will list all the links in the description. All right and we'll see you in the next one.
