Bob Ross Painting : Tips and Tricks to Master Advanced Seascapes

Landscape Oil Painting
5 followers
Hello and welcome back to the studio. Today's little seascape painting was inspired by
Bob Ross of course and a little trip to a place called Littlehampton.
It's just a 10 or 15 minute drive down the coast from where we live now.
It was jolly chilly and after a little bit of filming, which you can see up in the corner,
we retreated to a local cafe. We thought time for a warm-up and of course a piece of rocky road
really helped. So sit back and relax, watch me develop this little painting based upon
all these little experiences of painting seascapes. I make some mistakes and some
corrections as I go and I point out some little sort of failings which I think a lot of other
people might have when they're painting seascapes. So make sure you watch right to the end,
there are lots of little bits and pieces and tips and tricks all the way through the painting.
So sit back, relax, cup of tea, piece of rocky road and watch me paint this lovely seascape.
Happy painting people!
So here's my canvas. It's 16 inches by 20 of course and a piece of masking tape here.
This is my horizon line. It's a little bit lower than halfway down my canvas.
First thing I want to do is apply a thin even coat of Bob Ross liquid white oil paint.
This is a wet on wet oil painting technique. I keep it in a small airtight pot for ease
of application. I'm going to use a couple of Bob Ross one inch landscape brushes
an older one for the liquid white and a nicer one for blending. I'll use a liner brush,
a fan brush and a couple of filbert brushes. This one is a little bit older and better for
scrubbing on paint and of course a Bob Ross palette knife. So let's get started with our
painting. I'm going to use that old one inch brush, a small amount of liquid white. Remember
I said a thin even coat. We don't want the painting to be too wet. Hang on to your canvas
and scrub this well into the surface. I'll leave a link to a video that explains how to apply this
in detail. I'd finish off with some long flat strokes. Take care not to pull off the masking
tape. As you see I'm doing a little fingertip test to make sure I've got a nice amount applied.
Here's my palette and I'll list the colors down below.
First thing I want to do is take a little bit of cad yellow and some indian yellow.
I'll mix those up. I'll add a little bit of titanium white to the side of it
to make a nice pastel yellow color. My next color wants to be a sort of salmon pink color.
I start with some titanium white and add a little speck of red. Mix it well
and adjust the color to suit. Maybe a little more red for this one.
And I'll add a little tiny touch of indian yellow too. This gives you the most wonderful
salmon pink color. I also want a pastel blue color. I add a small amount of phthalo blue
to some white. If it's too bright I could always add some black.
I didn't add any on my palette just yet. In the end I didn't use any at all.
I'm going to start with this old filbert brush. I pick up some of the bright yellow color for my
palette. I want the middle area of my sky to be the bright yellow color. As you can see I just
scrub on a small amount. Keep it loose. You don't really want a tight shape. Allow this yellow color
to break up at the edges. Next some of that lovely salmon pink color we made.
Same brush. I didn't bother cleaning it. I can vary my color by adding more red or ochre to
the tones to get it just as I want. Let this color sort of bump into the edge of the yellow.
Again I'm using just little crisscross strokes here. I want this to be very very loose.
Let's add a touch of red to warm things up a little bit. I encourage you to take time when
doing these sorts of paintings to really sort of walk away from your painting and have a look at it
from the other side of the room. You'll see all sorts of things in your painting when you take
some time. There I think that's about right. Time for a soft blend. I'm going to use that old one
inch brush for this. It might be a little bit scratchy but well I think it'll do okay. It's
still got a bit of liquid white on. In this area I think I'll be adding a bit of a bright spot.
Let's dry clean my brush and go for some of that lovely pastel blue color.
I know there's yellow on the brush and it might go green but we'll take a chance.
Work your paint well through the bristles. If the paint goes green it'll be on your palette.
I think we're okay. Now continue adding the blue paint using those same crisscross strokes.
I work close to the red because at least the worst color I would get would be sort of a lavender tone.
I'll avoid the yellow colors for the time being. I can just detect the slightest touch of green
here and there but it actually looks quite good in my painting. Keep on blending, standing back
and blending a little more. So at this stage of my painting I was quite happy with the sky
but it did lack a little bit of something and I sat back with a cup of tea and considered it from
the other side of the room. Then it occurred to me I just didn't have enough contrast. I had lots of
lovely mid-tones, lots of lovely soft pinks and oranges and yellows and pale blues but I didn't
have enough darks in there and this is something I think people do struggle with sometimes in their
paintings. You do lovely work then you're afraid to put in a little bit of something with a bit of
body to it but be brave. Sometimes that little bit of extra dark makes the lighter colors really
shine and of course later on you'll see I add a real sparkle to my sky so carry on watching.
I want a lavender tone. I'm going to use some alizarin crimson and a little bit of phthalo blue
about five parts crimson one part blue. Mix it thoroughly and as you see from the color on my
palette you'll notice the color change. It can be quite a sort of sudden change and it'll be
too blue so go steady with it. I'll also make a soft pastel version of this with
a little bit more titanium white to one side. There I think that's about right for my painting
but let's try a little test. No not in the center of course I want to be going at the corners.
If it's too strong I can do something with it but if it's right in the middle
I might be in trouble so let's put in just a little bit here and stand well back.
I think we're fairly safe but it's still well maybe a little bit pastel. Let's add a little
bit more of that neat color that's looking better. My eye is being drawn to the center
of the painting a little bit more. Creating a stunning sky takes time so do a little stand back
walk away get a cup of tea. I think we're about right now. I'll add more to the opposite corner
and blend it in. As you see I work around my painting adding small amounts of color here and
there. Now time for some more blending. My favorite things to use are my fingers.
Just sit them on the edges of these clouds and give them a little smudge but not everybody likes
getting their fingers in the paint and maybe you prefer to use a brush so I've brought this brush
out to play. This is a Bob Ross blender brush. I'm sorry I didn't include it at the start of the video
but well I didn't know I was going to use it. It's super soft as you can see it barely moves
the paint but the overall effect is rather delightful. I want to create a light spot in my
sky maybe for some sun behind the clouds. I've got some titanium white and I'm going to just smudge
it in here. Just hold the brush in one spot and give it a good rub. I don't want this paint to
blend too much I want it to remain a little bit more intense. As you see the paint just wants to
sink in to the background colors. I'll give it a bit of a blend but well maybe I have to come back
and do this a second time. I'll leave it till later. Time to move on to the sea. I've pulled off that
bit of masking tape for the horizon line and using my old one inch brush which has got a few colors
on it I just want to use it to fill in that dry line where the tape was. I'll clean my brush off
across the canvas. So here's the brushes I've used so far the soft blender, an old one inch brush
and a couple of filberts. For my sea I'm going to use that same lavender color but I'm going to
darken it a little bit more. I'm still using that old filbert brush. I want to just scrub in some
color. It wants to be a little bit more intense than the background sky and I think that's about
right. Now time for some planning. I want some rocks in my painting so I'll just block them in
roughly here. I think I need to know where the sea line or the shore is going to be which is
roughly here and I want some big foam just about here. Again it's a nice big sort of shape and
this is where the wave is going to be and this line which is very important is the floor of the
wave where the wave meets the beach. This little angle indicates how the water rises up and forms
the wave. This is the eye of the wave. Now I've got that basic sketch done I can fill in the background
sea. I use little touches of lavender here and there directly under the area of the sky which
is nice and bright. I want to include a few touches maybe of some light dappling across
the surface of the water and I just stipple it on just tap it here and there. I'll add some
extra little bits of the lavender color as we go so I leave a few holes. If you enjoy my videos
don't forget leave a little like that's a thumbs up down below. If you have questions leave a
comment for me and if you want to see more videos don't forget to subscribe. Thank you.
Let's turn our attention to the eye of the wave. It's the area where the water is thin and the
light will shine through. I'm using my nice filbert brush with a touch of white and a little bit of
Indian yellow on it. Just scrub this color into the canvas. This color will also be reflected on
the beach so I'll scrub some in here as well. Let's not forget let's add some lovely salmon
pink color and probably a little bit of blue as well. They should all be reflected somewhere on
the beach. Now back into that pearl blue color I want to work on this part of my painting.
This is where the foam splashes up when it hits the back of those rocks.
It's quite difficult to paint foamy white effects against a pale background and adding a little blue
will add a little bit of depth of color to my wave. I'm also going to scrub in a little bit of that
blue color into the foamy edge above the wave. You'll see in a minute how this works to our
advantage. At the base of the wave and just above the rocks I scrub in a little of the lavender
color as well. This is where I want the deepest shadow to be in the wave. Without it again the
foam will look very flat and uninteresting. I finally use a fan brush and I've got a little
bit of white and Indian yellow mixed together and I want to work on this part of my wave. It's the
cascade where water is crashing over. Now let's use the corner of our fan brush to add some foam
to this crash of the wave. I'm using the same color but we'll lighten it up a little later on.
Think about how the water just sort of throws itself up into the air and catches the light
from the sky. I want to soft this into the back of the wave so I'll use my blue filbert brush just
to touch it in. Let's start working a little bit lower down and adding some more of the foamy
effects. I work in layers. Don't forget there's going to be some rocks here as well. I add a
little bit of the highlight, not too bright, and then I use some of the blue on my filbert brush just
to blend it in. Think about how the wave arrives in sort of sections and how each one has its own
little splash and crash and highlight. It takes a little bit of working out but with practice
you just start with a simple wave and just do what I've done. Add many layers. Now a little
more highlight around the edge of the eye of the wave. Again just above the blue shadow we put in
a few moments ago. As you see I do a little push and a little press and leave a little imprint
of the bristles. Let's zoom in a little closer for this section. Now you can really see the texture
of my paint. I'm just dabbing it on and squeezing it from the bristles and letting the brush sort of
fly away a little bit. Now you can see how I blend the shadow underneath to the foamy highlights.
I want to strengthen the shadow just under the eye of my wave with a little more lavender.
Notice how I don't mix up another new color. I carry on using the same tones all the way through.
It'll make your painting more harmonious if you don't start mixing fresh tones and fresh colors.
That's something I learned many years ago when I used to mix up so many colors that
just all didn't work together. Now let's sketch back in the position of the rocks
using the handle of my filbert brush. Let's also think about putting another little wave in here.
It'll need its own shadow line of course. Let's give it a little foamy top and of course
we need to blend those two edges together. Are you spotting a common theme here?
Waves are highlights, shadows and blending. Time for some rocks. I've got some dark sienna
and to this I'm adding some of my lavender tone. That sounds like a strange mixture of colors
but actually it just produces a really deep purple color. Perfect for a rock. If it needs
to be darker I'll add some van dyke brown. Now I'm going to take a small amount on the
small blade of my palette knife. Watch closely. These are the simplest rocks you can ever wish
to paint. Just press the paint down into the painting and let that mixture of brown, sienna
and the lavender tone mix with the color of the waves. Don't overwork it.
This is just a magic technique and something I really enjoy doing. Just letting the paints
blend on the knife and you can almost sort of create the structure of a rock and the foam all
in one go. It's a lot of fun to do and we are tempted sometimes to want to overwork it but
trust me when you see the finished painting you'll realize that actually less is more.
Just push the colors into each other and let the paint do the work for you.
There. See how my rock looks like it's sitting down into the waves? I just let a few holes
appear here and there and just scrape off the surplus paint. To frame my wave I'll add another
big rock here on the left. Again I'm using that sort of hit and miss sort of technique for the
rock. I find they give you just such wonderful results and they're really not that hard to do.
Next time you paint a rock see if you can do it the same way. I guarantee you'll be so surprised
at how good they can look with such little effort. Now let's add a little bit of a shadow line to the
base of this rock. I just want to sort of lose that bottom edge there and just add some darker
shadows into the water here. A bit of that lavender and the sienna color here and I've
done the same again under the rock on the left. My painting's starting to come together rather nicely.
Let's add a little more shadow here and there though. Again I just want to add a little bit
more depth of color here under the edge of this foam. It takes a few minutes of sitting back and
looking at your painting to realize that sometimes you do need to add more color. Be brave. You'll
see how my painting suddenly comes alive because it was just looking a bit sort of safe and a bit
bland. I use my fingers to blend the colors together. It makes such a huge difference to my painting.
I'm really pleased with it. I've washed my filbert brush. It was getting in a bit of a pickle.
I'm going to use some titanium white and a little touch of indian yellow again. I just want a very
very pale yellow color for my beach. I want to just think about where the light would come over the top
of the wave and it would just sort of catch the tops of these little bits of bubbling water on
the beach. Just catch the edges here and there. You just want the sort of suggestion of a little
bit of light playing across the surface of the water and then shape up the base of the wave.
Water is amazing when it sort of catches the light especially when it's moving. You'll often
get these little sort of I call them sprites of light bouncing up the surface of the wave.
I'll use my liner brush just to add a few little extra sparkles to the surface of the water in the
foreground. I'll also add a few little dots of pure white to my wave just to catch the edge of
the foam a little brighter. It's just here and there though not too much just a touch.
I think my wave's coming on rather well but there are still a few little touches to go.
Remember the sky? I really didn't get a lovely highlight that I was looking for.
My painting has sat overnight and it's just started to become a little bit tacky
so I'm going to use my finger and a little bit of pure white. I'm going to just blend it into the
eye of the wave. The paint as I said is tacky and it's still just blendable so don't leave this too
long. Overnight is perfect. I'll use my finger to blend that in and whilst I'm at it let's add a
little bit of a sparkle to the sky as well. You could use the blender brush to do this if you wish.
I think my rocks need one last touch as well. I've got some more of that lovely pink
salmon colour and I just let the knife just bump and touch that sort of heavy paint on my rocks.
It really makes them stand out now doesn't it? Just one little touch of colour can make
such a difference to a painting. And finally a signature. So there you have it. Inspired by Bob
Ross and a walk on a local beach. But don't move. I have another video all about painting seascapes,
shapes and sizes and proportions. It'll really make your next seascape a winner. Happy painting people!
