This HIDDEN Masking Tool Will Change How You Edit Photos

Photoshop Effects World
12 followers
#photoshop, #photoshoptutorial, #channelselection, #adobephotoshop, #photoshoptip #photoshoptutorials #photoshopeffects #photoshoplearning #DigitalTexture #DesignTutorial#CreativeEffects#TextureDesign#PhotoshopTextures#mockup
Photoshop has a hidden mask tool
which can change the way you edit photos
but you may not have used it yet
This mask tool does not use any selection tools or brush adjustments,
but is created by our Neural Filters and two simple checkboxes.
So if your image is opened in Photoshop,
of course we need to go to Filter
then to Neural Filters to start
In the Neural Filter window
We will go to the Depth Blur option to activate
We can forget all the settings
They are not important
The two settings we need to pay attention to
are Focus Subject
Then Output Depth Map Only
Clicking these two settings will give us a preview like this
Here, we are basically looking at a layer mask
It will have different intensities
according to the depth of our image
I will explain again in one minute
But now let's save this as a new layer.
Let's set this as a new layer first.
Then click OK.
Return to the main Photoshop page.
You can see that we have created a new layer.
Use this depth map for previewing.
But we can't really use this for anything
We can't use this for a layer mask
Because this is just an image
But we can choose the contrast of this image
using our Channels Panel
So go to the Channels Panel
We can click here
Or if you don't see it
Click on the window
then click on Channels here to display
but what we want to do is
select the obvious positions of all this layer mask
Do this
then click Cmd or Ctrl
and click this RGB layer image
So click this RGB image
while clicking Cmd or Ctrl
This will select all the obvious positions of the mask on this layer
Therefore, anything that is white
will be easier to select than anything that is gray
Anything that is black
Will 100% not be visible
This operate is like a layer mask
White is completely visible
Black is completely transparent
Different types of gray
It will give you masks at different levels
100% and 0%
This will make a little sense
When we make adjustments
But after our selection is complete
we can return to our layer image
then we can make adjustments
suppose I add a curve adjustment
I will delete the depth map below
because I don't want to see
I want to see the photo
You can see that we have a correct copy
of the depth map
But now it's a layer mask.
On the adjustment layer.
Assuming I make an adjustment.
You can see.
I am editing more background. I will adjust it to be very obvious.
I am editing more background
and less subject
because in the layer mask
Photoshop is told
anything close to the lens
The subject matter
and the dark areas of the layer mask
this adjustment will reduce the adjustment
compared to the background
light gray and white
this adjustment will have more effect
The beauty of depth maps is
we can add
very mixed contrasts or colors
into our photos
without having to create selections Sometimes selections
Can give you a difficult edge
It looks not very good
Give you an example
This choice
If we just want to imply the background
I would choose the background
Then choose the subject of the question
Choosed the subject
Now we can repeat
Create a new adjustment layer
I will click on the top layer
And layer arrangement
Then create another
adjustment layer
which will be on the layer mask
but I want to select the background
so I will press CMD or Ctrl I
To reverse the layer mask
so that our subject is not cut off
but now if I go
apply a similar contrast adjustment
Delete the deep map option
I will go
Let it become deeper
Of course this is possible
But there is a very obvious difficulty
In terms of the adjustment position
And without adjustment, the position
If we compare the depth map
It becomes more integrated and smooth
So we will have a
very good transition
in the image
Therefore, all contrast adjustments
mask and color adjustments
will become more integrated
because we don't have a
right or wrong stop
we have a
Gradual adjustments
Based on background
Central
And background
Our photos
We can easily control
Our layer mask
Now I'll give you a comparison
adjustment option.
If I want to edit a
subject that is
more prominent than
the background, of course we can.
Flip this layer mask
so click on this mask
I will press CMD or Ctrl I
to flip it
Now when I make this adjustment
Theme
will have most
this effect background
especially the background at a distance basically
no adjustment
this level
again
because we reversed
depth map
So now we
compare adjustments to the background
instead of the background
I also have a
very useful example
in one second
but before we get here
if you find
About the layers
and all the settings
Very impressive
Photoshop
I invite you
to download my free
Photoshop Pro eBook
In the following description,
it will help you
quickly
master six
most important
so that you can confidently start
working on your project
again
It is free
in the description below
but let's move to
example 2 we are here
discussing the same idea
but this time it is about color
in example 2
I have already
repeated above
the work we did,
from the filter,
then to the
mental filter,
selecting the depth map, then.
Focus on the subject options
then
output
to a new level
This is
the result I obtained
but because
we don't have one
Obvious theme
Standing in the center of the photo
This depth map
Is a bit different
We have a
Very obvious foreground
A middle
Then background
There is the sky
and the castle and so on
so in
the art drawing
you may want
to add some more
standard
contrast
to the foreground
but you don't want
to affect the background
or you may
Also want to
edit some colors
in the background
but not in the foreground
We can
use this depth map
repeat
in several different ways
achieve
But this time, we are taking some
additional steps. We did not do this in the
first example, as
before. We want to make
sure about the levels
of the depth map.
The system has been started. Then we go
to the channel
channel.
Press. Instructions
and control. Then
press. RGB image. To
make a.
Selection. All
the obvious layers.
Now we can
return to the layer channel
to make a choice We will start by making
a curve
then we will
apply the depth map
On the layer channel
make some adjustments
to apply
I will unlock
the depth map layer so that I can see
the image
my adjustments
will be significant
When I do these edits
but let's say
I want
a deeper
foreground
so I will
lower the midtones for example
starting
I don't like
the effect on
the background
This means that I will
adjust the
depth map,
so when I press the
layer channel,
I
will press CMD or Ctrl I,
so now I will adjust the foreground and
reduce the background.
But if the
background is still too affected , we can increase
the layer channel by
pressing CMD
or Ctrl L.
This will
enhance the
adjustment
of the layer channel. We can edit.
Black point
Here
And white point
To make
some adjustments
To adjust The layer channel
If
I look When I do
Black point adjustment
You can see
In principle , there is a
point that
has a view of
the castle, but when I
include this
point, the castle
becomes
completely black.
Therefore, it
will be adjusted.
The adjustment
makes it
more and more
independent.
In the
foreground I will
adjust
I can
move
this point
more clearly
visual layer I just need to
cancel hold
Alt
select
repeat
This time process
press
CMD
or Ctrl
L
layer
is selected
you can see
adding black dots
will from the perspective
add more
background
but if
So I went the opposite way from the highlights point
I could bring more of that mid-ground area of the photo
into the targeted area for this adjustment
So that way you can really refine the result
So I want to target more of the foreground
So I'm going to bring up the shadows here
Now the mid-ground and background of the sky
are completely eliminated from this mask
I'll click OK
And to exit this view
I'll just hold Alt or Option and click on the layer mask.
Now when I make this adjustment here.
It can be isolated just to the lower area of the image
It gives us a unique effect
That is like a gradient adjustment
But a little bit more customized
Based on the depth of the image
So turning this on and off
Now we have just an isolated adjustment to the foreground
Now let's say we want to go and refine some of the colors
But only in the background
I'll go ahead and begin by creating a new
Hue saturation adjustment layer
With no specific layer mask
And I want to go and edit the blues
So I'll click on the blue color here
And obviously if I change the hue
It will change the hue of all the blues in the image
But I don't want this to affect the foreground as much.
So let's go and use our depth map to fix this.
First enabling the visibility of the depth map layer
Going to the channels panel
Holding the Command or Control key
Clicking on the RGB thumbnail to create a selection
Going back to the layers panel
Clicking on the hue saturation adjustment layer mask
And then we want to fill our current selection with black
Because our layer mask is currently white
So we want to fill with the opposite color
The easiest way to do that
Is just to go to our contextual taskbar
Clicking on the fill icon
And choosing black as the fill option
And now our selection has been applied to this mask
I'll press Command or Control D to deselect it
And then disable the depth map layer
Of course we want to select the background
And less of the foreground
So we want that background area to be white on this mask
So to fix this
Just press Command or Control I to invert that mask.
But if, as before,
You want to have more of a clear separation.
I'll hold Alt or Option to view that layer mask
Just by clicking on it there
And then I can press Command or Control L
To access my levels
To apply some contrast directly onto that mask
And I want to increase the shadows here
So I'm affecting less and less of the foreground
Remember anything that is white or gray will be affected
Anything that is black will not be affected by our adjustment
Which means what we're looking at here
Is a selection of the midground and background of the photo
I'll click OK
Hold Alt or Option and click on the mask to exit that view
And now when I go and make these hue adjustments, I can add
them specifically to the sky,
and less so to the foreground.
So that way I don't have to deal with any complicated masking.
I could really increase the saturation or desaturate the sky.
Separately from the rest of the photo
This can be useful for creative editing
But also if you want to have color variations
Without having to create all these complex selections
Between your midground, your background, and things like that
So just turning that on and off
You can see how the adjustment is limited
To the background of the image
Turning these two adjustments on and off together
You can see that we've just had a lot more control
Over where our effects are applied
And this would be very difficult to replicate
With just a regular brush or gradients or things like that
On your masks
Because we have so much variation
Between the grays, whites and blacks on our mask
To create a really nice blended adjustment
With all of our effects
Now I would be curious to know what you think of this masking feature.
Down in the comments below.
Do you think that you're going to use this feature in your photo editing?
Or do you think it's not really that useful for you?
I think it's a really neat feature
That I have found a bit of use in
And it's definitely something that is much more hidden away
Than it should be in Photoshop
But anyway, I hope that you learned something here
And can apply it in your next project
And with that, I'll see you next time.
