Bob Ross Painting Tutorial Easy Seascapes with Paul Ranson CRI

Landscape Oil Painting
5 followers
Hello and welcome back to the studio. If you struggle with seascapes then
I think this little pastel beauty is really going to help you out.
I've used Bob Ross paints and brushes throughout for this technique
and I think you'll find that I've used some shapes which are a bit of a classic
that will really sort of solve a lot of problems with angles for you
which I think is one of the things most people trip up on. They get their wave in
just the wrong position, just the wrong angle.
So I've gone through this step by step to explain it as clearly as I can.
There's even a little bit of footage of our local beach just to sort of give you
an idea of what they look like in real life.
I hope this inspires you to paint your version because this
is an original painting by me so you won't find it in any of Bob's books.
Anyway, sit back, relax, get those paints and brushes out.
Happy painting people. So here's my canvas,
16 inches by 20 and you can see I've used a bit of masking tape
a little lower than halfway down my canvas for my horizon line.
I'll be using some of this to prime it, some Bob Ross liquid white oil paint.
This is a wet on wet oil painting technique.
I store it in this little airtight container for ease of use.
I have two one inch brushes, an older landscape brush and a newer Bob Ross landscape brush.
I'll also be using a filbert brush, a fan brush and a liner brush
and of course a Bob Ross palette knife.
Let's get started. I'm going to use my liquid white
and the older of the two Bob Ross one inch landscape brushes.
I just want to apply a thin even coat of this to the entire canvas.
And if you wonder how much to apply, well there's an easy test.
Use your fingerprints and as you can see my middle finger here, well that's about right.
That's a little too much and that looks a little too dry.
But I made a video all about this and I'll post the link down below.
Use firm brush strokes and cover the entire canvas,
but taking care not to dislodge the masking tape.
My Seascape has a fairly limited palette of colours, I'll list them down below.
But the very first thing I want to do is to mix up a nice lavender colour.
I'm going to use about five or six parts of alizarin crimson with bum part phthalo blue.
Make sure you mix this up well.
I'm looking for a sort of a nice lavender purple colour.
Having gotten that ready, it's time to put colour on canvas.
I'm going to go into some of the bright red and a little bit of alizarin crimson
and I brush mix the two on the same old one inch brush I applied the liquid white with.
This is a pastel seascape, so there's no problem having some liquid white still in the bristles.
I start out on my horizon line with just a small amount of colour.
As you see, over the next few minutes, I'm going to increase the value of my colours
steadily. I don't want to go too strong too quickly. Remember, it's a pastel seascape.
There, a lovely bubblegum pink colour for my background sky.
I'll add the same colours to my sea area, which is below the tape,
but they don't have to be an exact match. They can be a little stronger if you like.
Again, careful not to pull off that tape when you apply this colour.
Now, let's add some nice background clouds. For this, I'll be using my fan brush and some
of that lavender colour we mixed. Just take a very small amount. Can't stress that enough.
You just want a hint of it. We don't want to be overwhelming our sky.
I'm going to start up in the top left hand corner or the top right hand corner.
As long as you start somewhere at the top, where if you go a little strong, it won't matter too
much. As you can see, I'm blending this colour into my background sky, just to get an idea of
how strong I need to make it. And you can see from my brush strokes, they're little sort of
shallow U shapes. Just make little dipping strokes across the sky and slowly build up the
massive cloud. I also like to leave a few little bits of pale pink peeking through here and there,
and some very little bits of light sky. This is a fiddler's paradise. If you enjoy playing with
colour, then this sort of sky is absolutely made for you. Just enjoy the process of building up
your colour. But don't forget, top tip, stand back regularly. As you can see, I went a little strong
just here. I stopped, wiped off my brush and blend it into the background sky a little more.
Here you can see how I'm experimenting with my colours. I've added a tiny bit more crimson
to my paint. And well, it was okay, but wasn't quite what I was hoping for. So the easy fix,
I simply pick up my old one inch brush, which has got some of that liquid white and pink colour on
and just dab it out. You can blend out almost anything on this sky,
which makes this painting almost impossible to break and very easy to fix. Lastly, let's soften
down some of my brush strokes. I just gently stroke the canvas with the very, very side of my
brush. Don't overdo it though, because you can actually destroy an awful lot of lovely detail
here. I'll finish off with some nice long flat strokes. Now let's add a little bit of a bright
spot. I want to give the suggestion of some sun either rising or setting in my painting.
As you can see, I switch brushes. I've gone to my nice new one inch brush. I've heavily loaded
one corner of the brush and about a third of the way across my canvas. I'm going to go in and make
a little dab. As you can see, I'm going to build up that colour. I use the same corner over and
over and just keep tapping around. This slowly mixes with the background sky, but it creates a
lovely bright spot. I'll play with this area several more times during my painting, so it'll
go through a few different transitions. But that's one of the advantages of painting in oils. You can
change your mind over and over and over. I want to add the suggestion of some sunshine in my sky.
And for this, I'm going to be using my most artistic finger. Actually, they're pretty good,
but just use whatever you have to hand. If you don't like getting paint on your finger,
you can always use the filbert brush. But as you can see, I'm just going to make a small round
circle in the sky. If you blend out too much and you want it to be a little brighter,
just repeat this step several more times until you get it just right.
Now, time to pull off that masking tape. It should come off quite easily.
Well, nearly. And time to fill in the little bit of dry canvas. I'm using that one inch brush,
which I used to do the original liquid white and pink off for the background sky. And as you can
see, I blend out the horizon line very gently. Time for some planning. This line will be the
about a third the way down on the left hand side and about a third the way up on the right hand
side of that lower section of my painting. And as you can see, I've just scratched a line.
Now, position the major part of the wave, that's the crest of the wave, a little more centrally.
This line indicates where the back of the wave is going to be, where it cascades over. And this
line, the rise of the wave. This isn't very clear on my painting, and I filmed this until afterwards
that I would resketch this for you after the next step. I've gone back to my fan brush and once
again loaded some more of that lavender color. But this time, I want it to be a little stronger.
But the brush stroke is exactly the same. Little soft looping strokes. I want to indicate
moving water. The sea should have a gentle rise and fall to it. And in that area there,
which I waved the brush at, that's where I'm going to have the bright spot, where
the sunlight is reflecting across the sea. The area right in the center is where the crest of
my wave is going to rise. And the light area in the center is going to be the translucent or
transparent area of my painting. Now, let's sketch that back in again.
There's the crest of my wave, there's the back of my wave with the cascade where it cascades over,
and to the right where the wave builds and rises, forming a sort of tunnel. Now here's a little
clip of our local beach. I tried to capture a cascading wave with the eye and the transparency,
and I've got it here in this little freeze frame. You can see just how that
transparent area forms the cascade and the crash.
Hopefully this will help you see the anatomy of wave in real life.
Now back to my painting. I'm pulling out my grubby white paint very flat. I want to use
the edge of my palette knife just to tap into some of this color, quite firm and dry. And I
want to apply this almost directly under my sunshine. And I'm going to just touch the canvas
here on that horizon line. The further back into the painting this is applied, the more densely
it wants to be built up. Remember, these are the crests of little waves far into the distance,
and they're sort of stacked one on top of the other as they come closer towards us in the
paintings, so the angle changes. You can see it's slowly dropping to the right and the gaps between
waves becomes a little larger. That little area I don't want to over highlight. You'll understand
why when you start adding foam to the crest of our wave. I just want to add in just a few hints
of sparkly sunlight. For the eye of my wave I've put out a small amount of clean fresh
titanium white paint. I'm going to pick up a nice little blob of this on the end of my filbert brush.
Now right at the very top, the crest of this little wave, really work this paint into the canvas.
Now I like to use my finger to do this as well, just as we did when I painted the sky.
But just so you can see the difference, I'm going to use a brush this time.
Smoosh it into the painting. Well that's a word Bob used, and it fits really well with the technique
I'm using. Smooshing. Blend, blend, blend, and allow some of that pink color to slowly pick up
in the eye of the wave. I'll even add a little bit of a highlight to the right.
Just with the corner of that one inch brush, I'll slow right down just a few hairs. I just want to
tease this paint and blend it into the canvas, but don't overdo it. You'll start picking up a lot of
purple and a lot of pink and it will start to lose its transparency. Now let's work on this area of my
wave, the cascade where the water tumbles over and crashes to the beach. I've added a little bit of
liquid white to my titanium white, the grubby one that is. You can see I'm tinting this color down.
I don't want to be using pure white for this part of my painting,
and I'm going to leave a small gap between the eye of the wave, the transparency, and the cascade.
I've loaded my brush very well and see how I really press it into the canvas and just let the
brush fall from the canvas with a little flick. Now overlap that last stroke a little bit and add
another brush stroke full of color and another one. You can even make sound effects if you wish to.
There we go, and back in with the corner of my fan brush. Now I'm doing little circles. This is
the foamy part of the wave. It fetches itself around between the eye of the wave on the right
and the cascade on the left. It fits into that little gap. I'll come back and enhance that with
some pure white later on. Hopefully now you understand why I don't like using pure white
paint until the very end. This is the floor of my wave, in other words where the wave hits the beach,
so the foam can't go much lower than that. I just want to keep it on that little line I scratched.
I let the wave splash back up against that lovely shadow that I kept in the background cascade.
Lots and lots of little circular strokes here. Let the wave pick up some shadow colors.
Let's not forget the area on the right over the top of the other little transparency.
I'll post a couple of little photographs of that previous wave that we were looking at in the video
so you can see what I'm painting. Time to add a little more shadow to that foam. I've taken some
grubby white and some of that lavender color. I made a sort of a mid-purple tone and I'm going
to just massage that into this bit of paint. It looks a little bit too bright and there should
be a little more shadow here. Play with your colors and play with your waves. I'll even add
a little hint of shadow on the edge of that foam. It separates the foam from the eye of the wave
and gives the foamy area a lovely sort of sense of thickness and depth. I stood back from my wave and
well there was an angle I wasn't particularly pleased with, so I dry cleaned my filbert brush
and I just wanted to round this off a little more. It was a little too pointed for my taste.
As you can see a little bit of blending, a little bit of work and it's fixed.
Whilst I've got that brush fairly clean I'm going to start working on this part of my wave. This is
where the water on the beach sort of joins the base of the wave and I'm just going to use a few
little strokes here just to blend this all together. But remember those original layout lines.
Tighter as it comes towards the eye of the wave and as we go to the right of the eye the wave
tends to be a little flatter. It's where the wave is building so make sure you keep those
shapes and angles working in your waves. I'll add some detail onto the beach as well.
Let's paint some rocks for our wave to crash against. I've added a little bit of black to
the lavender to make it nice and dark and I'm going to put the rock right in here just where
wave crashes over and it'll smash into that rock and make a lovely big splash.
Notice how I use my filbert brush in what they call a stick hold. In other words I hold it in
the palm of my hand and just drag it across the surface of the painting very gently. This
deposits paint onto the canvas without digging into too much of that light colour underneath.
Practice this technique it's very useful and it sort of acts like a soft palette knife.
I'm going to frame my wave with another rock here on the right. Now bear in mind where the
floor of the wave is. Below that it's beach and we want to put some water around the base of the rock
so don't let it sink too low. Let's add some surf to our beach. I flattened out my grubby white paint
and notice how I slide my palette knife up into that colour to get a little roll of paint. Now
firm pressure finger on the back of the knife just in here where I think the rock goes down
onto the beach. I'm going to use some pressure to push the paint down into the canvas.
Now practice that technique you're trying to get the paint to slide along to the point of the knife
and from the other direction you're trying to get the paint to squeeze out from the heel of the knife.
This gives the illusion of foam splashing up the beach and spreading away from the wave. Now with a
bit of luck I'll see if I can get these two to meet somewhere in the centre. Time to shape that
foam on the beach. I picked up my fan brush you can see I'm going to just grab that back edge
and pull that paint down towards the wave. Keep these fairly flat. Remember we are actually now
painting the water sitting on the beach. I pull it back towards the base of the wave
and when I get there I can let it rise up into the middle of the wave. It's tempting sometimes
to go straight from that edge straight up and it looks like the wave is standing up on the beach.
So always remember pull flat first of all. I've added some more surf to my beach. This is close
enough to the base of the wave that I can now start shaping the foamy patterns on the face of
the wave. I'll add a little more titanium white paint to my brush to add a little bit more shimmer
and shine onto that face as though the light is coming through the eye of the wave and creating
a nice little sheen of light. It gives the wave an extra special touch. Let's add some detail to
the beach. I dry clean my filbert brush and I'm going into a little bit of dark sienna.
I'm going to allow this to blend with the pink and the liquid white on the beach. This gives
the impression of some damp sand. I might add some more little detail to it maybe they're rocks
maybe they're footprints you decide but add as much or as little detail as you wish.
I've gone back into my lavender and black color to add a few more little pebbles down on the beach
for the surf to bump into. I'll add a few little bits of water around the base of them to settle
them into my painting. I'll use the small edge of my knife for that detail. I've left some links
down below to all the paints and products I use. It's an affiliate link so if you make a purchase
I get a very small commission from it and that helps to support the channel even if you don't
you can always use the link to go elsewhere on Amazon. Thank you very much. I'm going to add some
additional highlight to this part of my wave. I think the light from this sun would make it glow
a little bit more but I'm not terribly happy with this sun it looks a little bit bold so as you saw
I just gently softened it out a few gentle brush strokes made it sink back into the sky.
Now I've added a little bit of liquid white to my titanium white and with my liner brush I'm going
to just come back and enhance the top edges of these little bits of foam just a few little touches
spark as I call them. It's all you need so don't overdo it. I'll use my fan brush just to soften
them back into the painting to make them merge onto the edges of the waves. This really makes
that foam pop but this part of my painting I'm still not very happy with and it's the area directly
behind the big wave. I think this could do with a little bit more detail so I'm actually going to
convert this sort of tapped on paint into a proper little wave shape. We know how to do it so why not
use a little bit of work with the liner brush to add some foamy effects and then I'm going to blend
it in slightly with my fan brush. It's very simple once you get the hang of it to shape and reform
these waves. As I mentioned at the start of the video my little painting Pastel Seas is a fiddler's
paradise. Add tons of detail little dribbles of water down the front of rocks and maybe a few
little seagulls. Here you can see I just paint them like a pair of eyebrows that cross over in the
center. It gives you the wings and the body all in two strokes. You can have them at different angles
and at different colors. Let's add some to our painting. Odd numbers of course three five or seven
work best. There's one little eyebrow there's the second one that looks okay and here is another one
but suppose you don't like them well just use your finger to rub them out. One of the beauties
of painting in oils is you can correct your mistakes and change your mind as you go.
So there you have it Seascapes this Pastel Beauty explains it all but if you still struggle and
it's too hard I have an even easier one for you to paint and the link is right here
somewhere on the end of my finger. It could be almost anywhere really.
