usando garrafa como molde para vaso. #ideiasbrilhantes #craft #decoracaocriativa #artesanato #diy

ARTESANATO TUDOPLANTA
53 followers
Jul 21, 2025
My loves, let's watch another video.
I'm using a mustard bottle. I cut it to a height that will make a nice base.
I used 400 grams of cement and 200 grams of mortar.
I gradually added water, stirring with a spoon until it turned into a cream, okay?
Then I poured it into the little pot we cut. I filled it about halfway.
I tapped it a few times to get the bubbles to rise.
To make the cavity, I took a small plant pot and put some plastic in it to protect it and weigh it
down. I added some aquarium pebbles, but you can add sand or other types of stones too.
Now just center it and leave the pot inside for 24 to 48 hours.
After this time, just remove the pebbles and also remove a small pot you placed there.
With the help of a utility knife, you can remove the plastic base.
I wanted to remove it completely, but I couldn't.
This base was very smooth because of the plastic,
so I took a wire brush and scratched it completely to make it rough.
I also made a little hole in the middle to drain the water, okay?
Now I'm making the same mixture as I started, only a little stiffer.
I'll apply a thin layer to my vase to remove any imperfections.
A damp brush also makes it very smooth.
Now we'll start making the models, okay?
For the snout, you'll make two little balls and, using a damp finger, glue all these parts
together. The brush will smooth out all the texture.
I'll make a small ball, a little thigh, and a triangle.
And then you'll fit it between the balls to make its nose, okay?
Adjust it properly, the glue can't be loose either.
If you don't have a stake, you can do it with a toothpick or a small knife.
And I made the depth of the nose.
I took a little bit of dough, made a little ball, flattened it, and then glued it on.
That's going to be his mouth, okay?
With the toothpick, I made little lines to simulate his mustache.
I took a little ball of dough, made a little bump, and glued it to the side to be his ear.
I glued it perfectly, made a little depth, and then I'll make the other ear too.
After 24 hours, it will be dry.
You sand it, give it a bath, and then paint it.
You can paint it any color you want.
My kitten will be black and white because I think it's very beautiful.
This black paint of mine is for flooring.
It's already ready.
And I also bought the white one in snow.
I want to thank all of you who are always here with me, liking the videos, sharing,
leaving messages.
This has all been very motivating, everyone.
Thank you so much for your constant affection, you know, my loves.
This video is very simple, very easy.
I wanted to show you that we can reuse the packaging we throw away.
You can make so many things, so many different objects.
So that's it, my love.
