SpaceX's massive breakthrough Plan to use New Fuel that others are Copying Now! === 0:00: intro 0:56: History of rocket fuel 4:11: Why SpaceX Chose Methane? 9:07: SpaceX’s on-site ASU facility === #alphatech #techalpha #spacex #elonmusk SpaceX's massive breakthrough Plan to use New Fuel that others are Copying Now! Since the rocket age first took off during World War 2, choosing the right fuel has always been a hot topic among scientists. Back then, rockets ran on things like ethyl alcohol, kerosene, or, in more advanced cases, liquid hydrogen. Sure, they worked… but they came with major downsides: pollution, inefficiency, and worst of all, they weren’t suitable for the long journey. That’s why SpaceX is believed to be leading the charge with a whole new kind of rocket fuel. The propellant used in Starship isn’t just different from what we’ve seen in the past, it’s a game-changer in terms of performance, efficiency, and cost. More notably, SpaceX itself also has an ASU fuel production project that has already been approved. So what exactly makes this new fuel so special? And why is it considered a key ingredient for reaching Mars someday? Let’s dive into today’s episode of Alpha Tech. SpaceX's massive breakthrough Plan to use New Fuel that others are Copying Now! During World War II, under the direction of German scientist Wernher von Braun, Nazi Germany developed the A-4, the first true rocket in history. It made its first successful flight on October 3, 1942, and became the world’s first liquid-fueled ballistic missile. SpaceX's massive breakthrough Plan to use New Fuel that others are Copying Now! The A-4 ran on a mix of ethyl alcohol, essentially diluted alcohol, and liquid oxygen, a type of oxidizer that’s still used today in many modern rockets, including SpaceX’s Starship. With a range of about 320 kilometers and a peak altitude of 80 to 100 kilometers, the A-4 was the first human-made object to cross the Kármán line, the official boundary of space. There were several practical, technical, and economic reasons why Dr. Wernher von Braun and his team chose ethyl alcohol as the main fuel for the A-4 rocket during World War 2. === Subcribe Alpha Tech: https://www.youtube.com/@alphatech4966/?sub_confirmation=1 ===
Since the rocket age first took off
during World War II, choosing the right
fuel has always been a hot topic among
scientists. Back then, rockets ran on
things like ethyl alcohol, kerosene, or
in more advanced cases, liquid hydrogen.
Sure, they worked, but they came with
major downsides. Pollution,
inefficiency, and worst of all, they
weren't suitable for the long journey.
That's why SpaceX is believed to be
leading the charge with a whole new kind
of rocket fuel. The propellant used in
Starship isn't just different from what
we've seen in the past. It's a gamecher
in terms of performance, efficiency, and
cost. More notably, SpaceX itself even
has an ASU fuel production project that
has already been approved. So, what
exactly makes this new fuel so special,
and why is it considered a key
ingredient for reaching Mars someday?
Let's dive into today's episode of
AlphaTech. During World War II, under
the direction of German scientist
Wernern von Brown, Nazi Germany
developed the A4, the first true rocket
in history. It made its first successful
flight on October 3rd, 1942, and became
the world's first liquidfueled ballistic
missile. The A4 ran on a mix of ethyl
alcohol, essentially diluted alcohol,
and liquid oxygen, a type of oxidizer
that's still used today in many modern
rockets, including SpaceX's Starship.
With a range of about 320 km and a peak
altitude of 80 to 100 km, the A4 was the
first human-made object to cross the
Carmon line, the official boundary of
space. There were several practical,
technical, and economic reasons why Dr.
for Wernern von Brown and his team chose
ethyl alcohol as the main fuel for the
A4 rocket during World War II. First,
ethyl alcohol was relatively easy to
produce and widely available in Germany
at the time. It could be distilled from
potatoes or other plant sources, helping
reduce dependence on scarce wartime
resources. When combined with liquid
oxygen as the oxidizer, it created a
stable combustion reaction, providing
enough thrust to power the A4 to a range
of several hundred km with a specific
impulse of around 250 seconds. Second,
although there were alternative fuels at
the time, like kerosene, it hadn't yet
been refined into the high-grade RP1 we
use today. And while liquid hydrogen had
been discovered and experimented with as
early as 1898 by British physicist James
Der, large-scale production and safe
storage were far too complex for the
1940s. In contrast, ethyl alcohol was
far easier to handle and store under the
technological conditions of wartime
Germany, especially when rockets had to
be mass-produced under extreme pressure.
Despite its early advantages, ethyl
alcohol was soon replaced after the war
by a more advanced fuel, RP1, a highly
refined form of kerosene. RP1 offered a
higher specific impulse, around 280 to
310 seconds, compared to just about 250
for ethanol, which meant better
performance and greater payload
capacity. It also had a higher energy
density, allowing for more compact fuel
tanks and lighter rocket designs.
Another key benefit was storage. RP1 has
a high boiling point around 217° C, so
it didn't require the deep cryogenic
cooling needed for liquid hydrogen or
methane, making handling easier and
cheaper. By the 1950s, the US and Soviet
Union had steady oil supplies, allowing
them to refine RP1 at scale. Its clean
combustion and low impurities made it
ideal for rockets like Atlas, Redstone,
and the Soviet R seven. As space
missions grew more demanding, from
launching satellites to reaching the
moon, RP1 became the industry standard
for first stage propulsion. Even today,
RP1 powers SpaceX's Falcon 9 with over
500 successful launches. But for the
next generation of rockets, especially
one designed to be fully reusable and go
to Mars, RP1 just isn't enough. So why
did SpaceX choose liquid methane for its
Raptor engines? What makes it better
than hydrogen or RP1? The answer is
surprisingly simple. Efficiency. For any
rocket, the dry mass, meaning the total
weight of the vehicle without fuel,
typically makes up only a small fraction
of its fully fueled weight. usually
somewhere between 5% and 25%. Take the
space shuttle for example. If we count
just the orbiter and the two solid
rocket boosters and not the massive
external fuel tank, its dry mass was
about 165,000 kg. When fully fueled, the
entire system weighed around 2 million
kg, putting its dry mass ratio at
roughly 8.3%.
Starship takes this even further. Fully
fueled, the combined weight of both
stages is around 5,000 tons. But its dry
mass is only about 290 tons, just 5.8%.
That's incredibly lean for such a
massive launch system. So why do rockets
carry so much fuel? They need an
enormous amount of propellant to
generate enough thrust to lift such a
large vehicle through Earth's thick
atmosphere and escape the pull of
gravity to reach orbit. Of course,
having more fuel is good, but raw
quantity isn't everything. To truly
optimize a rocket's performance, you
need specific impulse, or ISP,
a measure of how efficiently your engine
turns fuel into thrust. Think of it like
a car's miles per gallon. The higher the
ISB, the farther you can go with the
same amount of fuel. That's one of the
key reasons SpaceX switched to liquid
methane. It can deliver a specific
impulse of up to approximately 380
seconds in vacuum, while RP1 only
manages around 300 seconds. That's a big
difference. With the same amount of
fuel, a methane powered rocket like
Starship could theoretically reach the
moon. But if it were running on RP1, it
might only make it about 3/4 of the way
there. Many people might wonder if
SpaceX switched to liquid methane over
RP1 because of its higher specific
impulse, then why not go all the way and
use liquid hydrogen? After all, hydrogen
offers the highest specific impulse of
any rocket fuel, up to 450 to 465
seconds in vacuum, which is a huge leap
in performance. But the answer lies in
SpaceX's ultimate goal, Mars. Between
liquid hydrogen and liquid methane,
methane is clearly the more practical
option for missions to the red planet.
For one, the ingredients to make methane
are already available on Mars, thanks to
a chemical process called the sabotier
reaction. Methane can be produced
directly on Mars by combining CO2 from
the Martian atmosphere, which makes up
about 95% of it with hydrogen extracted
from subsurface ice. Hydrogen, on the
other hand, is much harder to deal with.
To use it as fuel, you'd need to extract
water, split it via electrolysis, and
then cool the hydrogen all the way down
to -253°
C, an extremely low temperature that's
hard to maintain for long periods in
Mars' harsh and fluctuating environment.
Methane, by comparison, only needs to be
cooled to -61°
C. It's far easier to store and handle.
It evaporates more slowly, is easier to
insulate, and is less prone to leakage
than hydrogen. All of this makes methane
a much more viable fuel for long-term
Mars missions. Not just to get there,
but to launch back from the Martian
surface, and that's why Space X chose
it. Next, let's talk about combustion
temperatures. Cooler burning fuels are
generally easier on rocket engines and
can help extend engine lifespan over
time. RP1 burns the hottest, reaching
temperatures of around 3,397°
C. Liquid hydrogen burns cooler at
approximately 3,97°.
And in case you haven't guessed, methane
falls right in between, burning at about
3,277°.
Now, let's shift to another thermal
factor, boiling point, the temperature
at which each fuel turns from liquid to
gas. Since rocket fuels need to stay in
liquid form to maintain high density and
be easily managed, a higher boiling
point makes storage and handling much
easier. Fuels with higher boiling points
require less insulation to prevent boil
off. And less insulation means lighter
tanks, which is always a plus for
rockets. Because methane and LOX have
similar storage temperatures, they can
be housed in adjacent tanks with a
common bulkhead, simplifying vehicle
design and saving mass. In contrast,
hydrogen and LOX have such different
temperatures that storing them side by
side becomes a major challenge. LOX
would boil the hydrogen and hydrogen
could actually freeze the LOX. Speaking
of LOX, there's been a huge development.
SpaceX has just secured permission to
build its own liquid oxygen production
plant right near the South Texas launch
site. More specifically, Cameron County
has officially approved SpaceX's plan to
construct an air separation unit just
300 ft from the local sand dunes. This
facility will function much like a small
refinery, pulling in atmospheric air and
separating it into its core components
for rocket operations. The plant will
sit on a 1.66 acre plot about 1.25 25
times the size of a standard football
field and will include 20 different
structures, most notably a 47 m tall
tower, roughly the height of a 15story
building. The tower will be built around
85 m inland from the vegetation line at
the edge of the dunes. Using this new
plant, SpaceX will separate air into
liquid oxygen and liquid nitrogen. LOX
is used as oxidizer for rocket fuel,
while liquid nitrogen is essential for
engine testing and general operations.
With this facility, SpaceX hopes to
eliminate the need to truck in fuel from
nearby Brownsville. Currently, the
company says it needs over 200 tanker
trucks of LOX and LN2 per launch, which
costs between $700,000 and $900,000.
Not to mention the temporary traffic
congestion it causes along Highway 4.
That's according to a SpaceX engineer
who spoke at a county meeting just last
week. To put things into perspective,
1.66 acres is relatively small compared
to large-scale ASU facilities like
Airquid's plant in South Africa, which
produces up to 5,000 tons per day of
liquid oxygen. A facility on this
footprint would likely fall into the
medium or small-cale category, more in
line with industrial or medical grade
production needs rather than massive
national supply. In terms of output,
midsized air separation units typically
produce anywhere from 150 to 1,000 tons
of LOX per day, depending on their
design and technology. Assuming SpaceX's
plant lands somewhere in the middle, say
around 500 tons per day, that would
equate to roughly 438,000 L of liquid
oxygen produced daily. Even after
factoring in electricity usage and other
operational costs, the economic and
logistical advantages are clear. Instead
of relying on hundreds of fuel
deliveries from outside sources, SP X
would be generating its own oxidizer
right on site faster, cheaper, and more
sustainably. But as promising as that
sounds, there's also a real possibility
that SpaceX might abandon plans to build
its own ASU at Starbase due to a lack of
sufficient on-site electrical power and
other practical limitations.