RV Storage Game Changer! Morryde Sliding Cargo Tray

Enjoy RV and Van trips
18 followers
3 Video ViewsยทJul 20, 2025
This Morryde Sliding Cargo tray is a game-changer!
Slide tray. I have been waiting for a long time to get one of these.
Today, we're going to bring you along with to the MORryde factory where we had this slide tray
installed, as well as getting some of our questions answered by them before we did it. But first,
I want to show you why I wanted to get one of these installed in the first place.
So when we first moved into this fifth wheel a couple months ago and moving out of our travel
trailer, we had so much stuff just crammed into this pass-through. And then we picked up our
batteries and components for our new electrical system and we basically had to Tetris everything
in there just to make it fit. So now that we finally had some space and time to get things
situated, we now have this beautiful open area and I'm finally able to do what I want to do.
So one thing you need to be aware of about these sliding trays is that if you have too much stuff,
they actually can become a hindrance. So there's lots of cool things you can do with these like
getting totes that perfectly fit inside the slide tray and then stack up. And as long as you clear
all of your measurements, this slides nicely in and out. And then you can get to the stuff
in the middle by sliding it all the way out. So this can really maximize your storage space as
well as the functionality of it. So my big grand idea a long, long time ago was to get the e-bikes
off of the back of our RV and put them inside of the RV, not only shortening our overall travel
length, but really stepping up our security game by not having them back there and having them
inside being protective as well as the cleanliness of keeping them inside. So with this current
boondocking stay that we just did, I finally got to utilize these e-bikes in the manner that I was
kind of thinking about. And that is when we get to a new spot and we don't want to drag this fifth
wheel around not knowing where we can turn around or where we can even fit. I can then pop out an
e-bike right away and actually go out and do a little bit of scouting. So they do fit really
nicely, but because we have a narrower pass-through than a lot of these big fifth wheels, we can't turn
the bikes sideways, really maximizing our space. So I just kind of got this setup cleaned up and
kind of put together. So I'm still playing around with where I'm going to put my stuff,
how the bikes are going to work, and all that. But I have to say I really love the look, the
functionality, and being able to maximize everything on the sliding tray and not having to physically
lug everything out just to get to the one thing I need. Now we'll go over some of this stuff as
we're at the MORryde factory, but you can see it's really not that difficult to put these in.
There's just a few screws that go right down into your decking. These come fully assembled,
and even a DIYer can put one of these in in about a half an hour. Now there's a few different types
of these slide trays as well, and one of the major things was a 60% slide or an 80% slide,
and that's how far the slide goes out. You can also get slides that come all the way to the cargo
door as well as to the other cargo door, but I also wanted to leave this space right here open
for maybe my hose reel and water filter. So that might look something like this. You know, these
big triple water filters fits in here, and these could even get mounted up higher. We have a hose
reel from MORryde as well that I'm trying to decide what to do with that. You know, this is a 50 amp RV.
It has those big heavy cords that are kind of a pain in the butt to reel up, so they can either
get mounted to the floor or mounted to the ceiling, but this to me just gave the best of both worlds.
You can even put large totes in here, double stack them, and still utilize the slide on the other
side. So instead of having the slide take up all of your pass-through, it just takes up three
quarters of ours. You can even get slides that are half of it, or you could put two slides in
and have each one function independently or separately. So there's lots of flexibility,
and I gotta say, since we've had this for the past month or so, I'm really excited to continue
to try it out and see how it's going to work perfectly for us. The amount of stuff that we
had crammed into this pass-through was unbelievable. It was just stacked from end to end, bottom to top,
and anytime I wanted anything, first of all, I didn't even know where it was, but I basically
had to take everything out just to get to it. So this is definitely adding up. And then you have
these little spaces that are kind of left over, like I said, this one here. And then on the sides
of the trays, there's skinnier spaces for longer items like brooms or shovels, things like that.
And you can even put stuff underneath the slide if it fits. So these are the little riser kit legs
right here. You can get them taller. We needed at least this one inch to get over the lip of our RV,
but you can even get it taller. You can put ladders under there. If it's wide enough,
you can put solar panels or anything you want. Right now, I just have kind of leveling blocks
that are sliding underneath there. So you don't have to go to MORryde to get one of these things
installed. You can get them ordered on eTrailer or a few other online retailers, and you can really
just put it in yourself. But because we were in the area in Indiana, we decided to stop by
our good partners MORryde and check out their facility. They actually have overnight spots
for people that are getting worked on there with full 50 amp service on the plug-in.
All right, I'm here with Austin from MORryde. And before you ask, it is National Flamingo Shirt Day.
So thank you so much for joining me today. I love the shirt. Yes, happy to be here. Gotta
rep the flamingos. Awesome. So we're actually getting a slide tray put in, and we're just
going to go over a couple of the questions that I've actually had, some of the things that I've
been curious about. And first off, what is the best way for someone to measure in their pass-throughs?
So not all RVs are made the same. There's some big fifth wheels that have massive baggage
compartments, some motorhome users, and then there's the little smaller travel trailers that
have really narrow and short baggage compartments. So what we're doing is we have a variety of
different measurements and sizes available in the aftermarket. And basically what we're doing is
we're just measuring the total width of the tray. We give you a variety of different options,
anywhere from 20 inches wide up to 52 inches wide. So if it says, let's say, 26 inches
wide for the tray, and I measure my pass-through and the door opening is 26 inches,
it will come through there? It will come through there, yeah. So our 26-inch tray, for example,
would be like, it's the overall outside dimension. So it's like 25.95, roughly, or something like
that. So if you measure 26 inches from your total width, so your inside of your baggage
compartment, that opening, if it's 26 inches, our 26-inch tray will fit. Nice. And another thing I
was curious about was the 60% extension to the 80% extension, and what are kind of your thoughts on
that and the main differences between them? Yeah, so great question. The main difference is obviously
the extension. So there's the 60% and 80%, but the reason for it is the 60% is going to slide out,
and you have 60% of whatever that total length is. So if you have a 90-inch tray, it's going to
extend out 60% of 90 inches. If you have a 48-inch tray, it's 60% of 48 inches. So the 80% is going to go out about 20%
more than the 60%. Correct, and the only thing to consider with that is going to be weight capacity.
So with the 60% extension, you have an 800-pound weight capacity. We use some different
outriggers to tie everything together to give it more of a substantial structure, so you can store
a little bit more gear on the inside. And then there's the 80% extension trays that only hold
500 pounds. Okay. And I say only, most people don't carry that much stuff, but some people like going
up to the limit. So you kind of pick and choose. You get 300 pounds more with the 60% extension,
but some people need that added distance outside the door of their RV. Okay, that makes sense.
And then do all of the trays open to both sides or do only some of them? Good question. So the
90-inch trays, 60% extension, will slide out both ways. So you can slide it this way or out
the other way. And all of our 80% extension trays also can slide out both ways. Okay.
One thing to note is our 80% extension trays only come in 72-inch wide models, so we don't have the
same variety. If you want the 500-pound 80% extension, you do have to get a 72-inch long
tray. Okay. And that's the one that I went with, just kind of mulling over all these different
options. I felt like that was going to give me the best to leave about 24 inches by my water
compartment for filters, water softeners, or even stacking totes if I wanted to do it that way.
And then I can have that 80% extension out of my passenger side. So that was kind of the thought
process that I had, but there's definitely a lot of different scenarios. And then also on mine,
we had to go with a riser kit so it would fit over the lip. Is that pretty common for a lot
of people to do or does that kind of depend? Yeah, it kind of depends on the model. So
every manufacturer designs their baggage doors differently and their sub-framing and their
flooring. So for your Alliance, you did need the riser kit to lift over top of that baggage door
lip is what we call it. Okay. So all of our cargo trays, regardless of which model,
gives you 1.6 inches of clearance. Some people are like, why 1.6? Well, typically one and a half
inches is the lip on those baggage doors. Okay. And so underneath the tray, so if we slide this
in, underneath the tray is one and a half inches of clearance underneath there. Okay. So if you
have, you know, a 1.6 inch lip or taller, you will need to either shim it with two by fours or
one by four or whatever you want to put under there. Or we also offer a riser kit that's
adjustable up to like three and a half inches. Okay. And so the riser kit that I have, I could
change how high I want it if I want it. Yeah. Because some people are putting things underneath
the tray, uh, tables, I don't know, skis, snowboards, I'm not sure what you carried your RV,
but like anything that would, that would fit underneath that. Yep. And that's the nice thing
about, you know, the RV lifestyle accommodates a number of different hobbies. So skiers, fishers,
hunters, um, you know, tables, chairs, anything like that. Yeah. Anything that's small and thin
can slide under there. All right. My very last question is all about the install.
We're obviously getting it done by you guys, the professionals, but can somebody do this on their
own? Yeah. The nice thing about our cargo trays, uh, compared to anyone else out there is that
these come fully assembled. So really there's two main components of the tray. There's going to be
the upper tray assembly that comes with, you know, the side rails, the flooring that's fully carpeted.
And then the other half is going to be the bottom railing, which basically comes with a variety of
hole settings. Um, so there's holes in the front, the back, the middle, and all of our trays come
with a big hardware pack. So we give you the option to use short, like one inch screws. We
give you long two and a half inch screws. We give you bolts if you want to bolt through the floor.
So again, with most of our products, they're very user-friendly, very easy to install.
Yeah. Um, usually takes anywhere from 10 to 15 minutes. It can take a half hour if you have to
shim some stuff. Yeah. Um, but very easy to install. So if you have a Phillips head screwdriver
and a Phillips head bit, that's all it takes to install those. Cool. And I lied. I got one more
question. Okay. Let's hear it. So if somebody orders these, do they have to get made? And what's
kind of the lead way time for somebody ordering one? Yeah. So most of our trays, since we do all
the manufacturing here in the US, um, at our main campus here in Elkhart, um, we do everything in
house. So from cutting the metal to forming powder coating, building the carpet and the table,
all this is made in house. Um, but we do stock a lot of these subcomponents and our distribution
customers, um, like the big national distribution company companies that sell to our dealers,
like the camping worlds and the general RVs and all those other big dealerships stock these in
their warehouses. Okay. So you can go online, you can order, um, you can buy it through a local
dealership. And typically if you can't get it same day, you can get it within a day or two.
Nice. Perfect. Well, it's always a pleasure seeing you. Awesome. I appreciate all the
information and I'm excited to get ours done today. So have you been thinking about getting
a slide tray? I can definitely say it's pretty cool. If you decide to do it, it's not for everyone
and not for every RV, but it's definitely one of those things that is a really nice item to have.
I'll put links to each trailer down below so you can check out the different sizes.
Thanks again to our partners, MORryde, and we'll see you guys on the next video.
