Curtin House Case Study - Thor's Hammer Recycled Timber

Nature House
39 followers
#Architecture #Naturehouse #House
This outstanding knockdown-rebuild project came to life through the collaborative efforts of Ben Walker Architects (BWA), Ewer Constructions, and Thor’s Hammer.
This impressive residence used 10.4km of recycled timber throughout the build.
Comments are disabled for this video.
We're on one of the jobs that we're most proud of being involved in. It's in Curtin in South Canberra.
It's a Ben Walker architect design built by Alan Newer from Ewan Constructions.
There's miles of recycled timber in this job, carefully chosen for being super high durability
to cope with some of the really exposed locations. It's been used as external cladding, lining for
the ceilings and the decking would be the main areas that we've produced.
Immediately next to a fairly busy open space, so there's a bicycle path running along that edge,
it means we get some beautiful views to trees but had to come up with some
ways of dealing with privacy and so the house is sort of nestled into the block.
It has a series of cutouts for the open spaces. Those cutouts for outdoor decks and open spaces
then utilise things like sliding timber frames, batten frames to provide privacy when they want to.
As a palette of materials, the timber has a really important job to try and soften or warm
some of the harder materials or again some of those harder materials.
One of our main challenges was about how do we procure and ensure that we can get the
quantity of timber and the different types of timbers that we needed. We wanted to make sure
that we could use as much remilled and recycled timber as we could so that's why we spoke to
Thor's Hammer about providing that quantity of timber for us.
And it was like 10.4 kilometres of timber we worked out and not only that it was recycled iron
bark and dense reds which you know are probably one of the rarer timbers that we get. We might
only get about 10 percent. Yeah we were a little bit concerned. It was amazing because
Al and the builder got the order in 12 months before all the timber was needed so we had enough
time to search out, set aside the iron bark and save it, dress it and make it the products for
this for this job. So it was great. Thor and I have known each other for about 27 years now and
so whenever we need advice on recycled timber or the best way to obtain timber we always head out
to Thor's Hammer for our selection of hardwoods. David out there on the front desk had been more
than helpful when we put the order in. As you can imagine trying to obtain all of this iron
bark timber for the project it's not just in the aisles down at Bunnings you can't do that you need
to go and source it from demolition sites and be sustainable and then they mill it all up for us
and get us to site. So projects that we're working on have got a higher demand for recycled and
remilled materials and that's partly because we've got a focus on sustainability so reusing is
obviously a great and important thing for us to do. Timber is one of the easier things to use as a
recycled material so we love to use Australian native hardwoods so some of the iron bark and
spotted gum and other timbers, black butt, suit our projects really well but they're becoming much more
scarce and so reusing timber, recycling timber gives us an opportunity to to use those
those resources when timber is becoming scarce. And today being delivered here on the project
is a new king-size bed and a dining table out of the salvaged timber that's been found in the old
home and it is a lot of work but it's a nice thing to do that you can represent the old home
in the new home. The stories that are within that recycled timber from its previous life it's been
used in a bridge or a factory in another part of Australia and all of a sudden it becomes part of a
house in Canberra is fantastic we love the fact that those stories are reborn and started again.
