Carved frame part three

Eternal Sculptures
211 followers
3 Video Views·Jul 19, 2025
Hello friends!
I want to finish the frame in today's video.
By the way, I have already sanded the panel, it remains in some places to go through
fine sandpaper, but for now I will put it aside and I will do the cutting
of the back side in the frame.
I do this so that the thread on it is more
thin and neat.
So I'm starting, and I wish you friends enjoy watching.
There is nothing complicated about cutting, where on the front side I made a selection,
on the back side I also make a selection, where I rounded off, there I also round off.
As I say, there is no difficulty in this matter.
From time to time I turn it over and see what I get from the front side.
Then I think about how to fix this crack.
I finished the outside, it remains to go through all these places that are in the middle.
I finished cutting the back side, the frame even seemed to be lighter, although I did not
shoot there for a long time.
Nevertheless, I will sand now.
All friends, I finished sanding, even my fingers can't stand it.
I turn to the detailing of the leaves.
With the help of a corner I put such stripes.
At the same time, we will also make detailing here.
I will make a filling of the background, both here and in the frame.
Yes, I will tell you, the filling decides at night.
Firstly, the thread seemed to be cut out, some kind of depth appeared.
Secondly, all the grooves that were formed during the milling of the thread,
all these burrs, everything was hidden.
So, I tried here, friends, on the daughter.
Colors of various drills.
Pine, beech, chestnut, brown, gold-brown and red-brown.
Well, here is an oak.
At first I wanted beech and chestnut, well, I changed my mind.
I will run the panel in brown, and I will make the frame in gold-brown.
Well, let's get started.
I was written in the comments that I should try the varnish on a water-based varnish.
I bought it.
By the way, it is diluted with water in such a white jar.
I tried it on a piece of oak, covered it three times, applied it.
It seems that nothing, such a minimal shine is obtained.
Now I will try to apply it to the panel and see what it looks like.
Well, it foams, it's just a horror.
Well, in principle, there is time to fix some smudges,
and that it does not dry so quickly.
This is a plus.
On the bar, in principle, the bar was smooth.
I just walked, it did not foam.
And here, look, how it foams.
Maybe there is a problem.
In general, I do not know.
I already went through the frame, applied one layer.
I started from here, it has already dried up more or less.
I usually go through with sandpaper after the first time,
but here I will probably go through and apply another layer of varnish,
and then I will go through with fine sandpaper and remove this pile from the panel.
And this foam here, I thought it would be visible.
No, in principle, it sucks up or absorbs, I do not know.
In short, it disappears after it dries up.
Well, here I had a lot of foam, I started to apply varnish here,
but it is no longer there.
Well, in principle, I think it will be fine.
After it dries, I will apply a second layer of varnish,
and then I will go through with fine sandpaper and remove this pile.
I already went through the panel with fine sandpaper,
it remains to go through the frame.
By the way, you need to rub carefully so as not to tear off the varnish.
Well, after that I will cover the third time with varnish.
As if I threw milk on the white panel.
In principle, it has already dried up a little here,
but it seems to work out well, the shine is already manifested,
and the frame has already dried up more or less.
So when this third layer of varnish dries up,
I'll show you what happened.
So, the varnish is completely dry.
By the way, it dries for a long time.
It says on the can that the second and third layers dry out for an hour and a half.
I don't know, it dried out at 10 o'clock,
maybe because I applied a very thick layer,
but I don't know, I'm using this varnish for the first time,
so I don't know why.
So, I'll show you the back side.
Someone asked me how I strengthen the frame.
I will not strengthen this frame with anything.
The panel weighs little, so I don't need glue.
I use good glue, so I don't need to strengthen it.
And here is the frame on the mirror.
If you haven't seen it on my channel, take a look.
I bought such metal corners in the store.
I milled it with a milling cutter and screwed in small self-tapping screws.
By the way, the self-tapping screws need to be very small
so that they do not go to the other side.
This is important.
By the way, I cut off those that I bought in the store, shortened them a little.
And, of course, I also gave the ears.
It will hang on the ears.
Now I will insert the frame into the panel and show how it looks.
There is a little shine, but the shine has appeared.
If I applied the varnish for the fourth time, it would shine a lot.
That's how it turned out.
By the way, friends, tell me about the varnish.
Is this varnish good on a water-based or not?
Otherwise, I don't know whether to use it in the future or not.
I was advised to try it.
To be honest, I didn't like it very much, but I can make mistakes.
So I would like someone to understand the answer.
Otherwise, I will start advising, then you will not understand.
Well, who liked the work, like it.
Do not forget to subscribe to the channel.
Good luck to all, friends, see you.
