Pre-Historic Technology in Egypt Left by Unknown Civilization

Decoding Mystery
19 followers
The Serapium of Saqqara is an ancient Egyptian necropolis located near Cairo,
which is renowned for its assemblage of massive granite boxes believed to be sarcophagi. These
boxes, crafted with astonishing precision, have sparked considerable debate about their creation.
The extraordinary craftsmanship evident in these granite boxes
suggests the use of advanced technology far beyond what is traditionally attributed to
the ancient Egyptians. Each box in the Serapium of Saqqara is hewn from a single piece of granite,
a material known for its extreme hardness. The boxes are enormous, with some weighing up to 70
tons, including the lid and base. This means that the blocks from which they were carved would have
been weighing around 200 tons. The precision with which these boxes have been crafted is
remarkable. Their corners are perfectly square, and the flat surfaces are exquisitely smooth,
with an accuracy that rivals modern machining capabilities. This level of precision,
achieved several millennia ago, is astounding and has led to the speculation that the ancient
Egyptians had access to advanced technology, possibly lost to time. One of the most striking
features of these boxes is their interior surfaces, which are equally precise and smooth as
the exteriors. Achieving such accuracy on the inside of a stone box, particularly with the
tools supposedly available at the time, seems impossible. The walls of the boxes are of uniform
thickness, suggesting the use of sophisticated measuring and cutting equipment. This level of
uniformity and precision in stonecraft is rarely found in other ancient Egyptian artifacts,
leading to questions about the technology and methods used in their construction.
Moreover, the process of hollowing out these massive granite blocks would have required
significant understanding and control of stone cutting techniques. The conventional tools of
the ancient Egyptians, primarily made of copper, would have been inadequate for shaping such hard
stone with the precision observed. This discrepancy has fueled theories suggesting that the builders
of the Serapeum possessed advanced technological knowledge, potentially including high-speed drills,
diamond-tipped cutting tools, or other sophisticated machinery.
Another aspect that intrigues researchers is the purpose of these boxes. Traditionally believed to
be sarcophagi for the burial of sacred apis bulls, this explanation has been questioned due to the
boxes' elaborate and precise construction, which seems excessive for mere burial purposes.
Some theorists propose that these boxes were used for purposes that required precise dimensions and
smooth surfaces, perhaps related to some form of energy manipulation or scientific process
unknown to modern science. Additionally, the granite boxes also possess acoustic properties.
The transportation and placement of these massive boxes are also subjects of wonder.
The Serapeum's underground tunnels are narrow and winding,
making the movement of such large objects a logistical challenge. Also, why are there no
signs of torches, such as burn marks, anywhere in the Serapeum of Saqqara? What kind of lighting did
they use to illuminate these underground spaces? In contrast to these theories, mainstream archaeology
attributes the precision and craftsmanship of the granite boxes to the skill and patience
of ancient craftsmen who, over generations, perfected their stone-working techniques.
Critics of the advanced technology theory argue that there is no direct archaeological evidence
supporting the existence of machinery or tools sophisticated enough to create these boxes in
ancient Egypt. Creating such precision in ancient times would have required not only advanced tools,
but also a sophisticated understanding of engineering and geometry. The scale and
precision of the boxes in the Serapeum are not replicated in any modern granite quarries,
indicating that the ancient Egyptians, or perhaps a pre-existing civilization,
had access to technology and knowledge that are not yet fully understood.
We already mentioned the massive granite boxes of the Saqqara, but we are obliged to mention the
many other fascinating and massive granite boxes found in Egypt. Each one of them exhibits details
suggesting the use of some form of lost, ancient technology far beyond what has traditionally been
understood or accepted. Take a look at this giant granite box displayed at the Cairo Museum.
This box, significant yet not widely known, is believed to have been abandoned by the Egyptians
due to a mistake in the cutting process. The irregular, slanted cut, deemed an error, led to
the abandonment of this particular stone block. However, this apparent mistake inadvertently
provides strong evidence of a sophisticated advanced tooling method, far surpassing the
capabilities attributed to the ancient Egyptians. The cut extends deep into the hard granite,
making it impossible to fit a chisel inside. The conventional theory, widely espoused by
modern researchers, is that the ancient Egyptians used slow, primitive copper-based saws for cutting
granite. Yet, this theory falls short when scrutinized. Trials replicating this method
demonstrated an excruciatingly slow cutting rate of only four millimeters, or 0.15 inches, an hour.
At such a slow pace, it is highly implausible that the artisans would not have noticed and
corrected a deviation as significant as the one seen in the granite box. Where the cut should
have continued, the stone has been marked with a groove. Even this mark is precise and smooth.
Moreover, it appears the granite was cut from two sides simultaneously,
most likely by two circular saws, with one cutting from above and one cutting from below.
To see such a smooth and perfectly precise stone cutting, we have to assume that they
were using some sort of sophisticated machine capable of rapidly cutting through granite.
We can also see precise saw marks in another granite box in the Cairo Museum, which is just
a few steps away. The marks we see here look like the marks left by a type of saw, strikingly similar
to a modern bandsaw, but with capabilities suggesting a much higher speed of operation.
In contemporary terms, such an advanced cutting mechanism requires the use of diamonds,
specifically a diamond-encrusted blade, to slice through granite efficiently.
The existence of such advanced tooling presents a historical anomaly. During the dynastic times
of ancient Egypt, there is no recorded evidence of diamond technology or tools with diamond
encrustations being used or even existing. Another strange box-like artifact is this one.
On top of it, there are a series of circles that are perfectly smooth,
most likely made with some sort of machine, as they are completely identical. On the side of
the object, there are strange burn marks that left significant damage to the stone.
The head of whatever caused these marks must have been immense.
The exact purpose of this artifact is still unknown. This box, made from red granite, has
even more spectacular marks. Not only is it perfectly hollowed out and shaped with precise
right angles, but it also has these strange tube-drill holes. These drill holes are exactly
the same size, penetrating the granite at an intense depth. It's almost undeniable that these
marks were made with an advanced machine rather than simple bronze tools. And if this isn't enough
to convince you, take a look at this granite artifact, which also exhibits tube drilling
techniques. If you look closer, you can even see the spiral grooves on the piece. These grooves
display uniform depth and spacing, and are evident in all the drilled holes of the artifact.
Given that the holes intersect, the consistency of these grooves would be unlikely if they were
the result of an abrasive slurry. Core 7 is a remarkable cylindrical piece of granite
discovered near the Great Pyramids that is at least 4,500 years old. This ancient artifact
is notable for its perfectly spaced, continuous spiral groove, reminiscent of a vinyl record's
grooves. Such precision suggests a level of technology seemingly beyond the capabilities
of ancient Egyptian civilization, known to possess only soft copper tools, inadequate for drilling
into hard granite. The mystery deepens when considering the nature of the groove. Traditional
Egyptian tools, like the bow drill, produced a distinct back-and-forth pattern, unlike the single
continuous spiral found on Core 7. This pattern is more akin to the marks left by modern, rapidly
rotating drills, suggesting a drilling method far advanced for its time. Modern machinery capable of
creating a similar core operates at high speeds and often employs diamond tips, a material hard
enough to penetrate granite. This raises the provocative question of whether ancient Egyptians
might have had access to such advanced drilling techniques, potentially involving materials as
hard as diamond. The groove's shape on Core 7 not only defies the expected capabilities of ancient
Egyptian technology, but also implies a drilling force greater than that of contemporary power
drills. Analysis of the spacing between each spiral turn indicates a drilling pressure that
surpasses modern equipment, hinting at an unknown highly advanced civilization or technology.
The core was made by a drilling process with greater strength than a modern power drill.
What does this tell us? There are no tools of that caliber that we know of.
If you were impressed by the granite boxes we showed you so far, you will be stunned by the
ones on Elephantine Island. This site is like a graveyard of advanced technology, as it's filled
with scattered remains of extremely precise granite artifacts, cut and shaped to perfection.
The only structure that was left in relatively good shape is this massive box, which Egyptologists
call a shrine. It features a pointed or pyramid-like top, sharply defined, possibly once housing a
benben-like stone or point similar to the Old Kingdom pyramids. Additionally, the box is not
completely hollowed out but includes inset edges and a large step or platform inside.
The box's interior showcases precise 90-degree corners with tiny inside radii. Around the
inset edge, we can find large tube drill holes, which were probably pivot points for some sort of
mechanism. The smooth, flat surfaces, sharp corners and intricate details suggest a level of accuracy
that these primitive tools could not achieve. Further examination of the box reveals a semicircular
edging running around the top and bottom. This edging, seemingly carved from a single piece of
granite, is evidently the result of a now-lost technology. What's more shocking is that this
granite altar, as they call it, is not a unique creation. The entire site is filled with the
broken remains of dozens of such altars, all showcasing the exact same features and precise
carvings. It's like the entire site was a modern factory that manufactured these artifacts in large
quantities until something happened that destroyed the entire site. And all of these granite boxes
and artifacts we showed you are just the beginning. There are countless more, all of which possess
features and qualities resulting from advanced machinery. Perhaps the most precise granite box
found anywhere in the world is the one discovered beneath the pyramid at Lahoum. There, inside a
chamber made of polished, curved granite stones, we find this remarkable tilted granite box that is
perfectly flat along the top side. When researchers measured the four corners of the box with modern
equipment, they were stunned to find that they are near identical. A similarly startling mystery can
be found at Mastaba 17, a monument located near Midam. Beneath a crumbling pile of mud bricks
lies an enormous megalithic stone chamber containing a precision-cut stone box, precisely
fashioned with perfect corners inside and out from a single piece of granite. The lid has rising
rectangular edges and there are knobs on the ends. Is it possible that all of these granite boxes and
artifacts were the leftovers of a lost prehistoric civilization that flourished before the Egyptians?
Perhaps this will explain why such sophisticated objects were used for such primitive purposes as
sarcophagi, because the Egyptians who found them didn't know their real purpose, just like us today.
