英國皇家軍械博物館 英國皇家軍械庫 一戰英國維克斯1型空戰用機槍
王者风范
22粉絲
65 次觀看·2025年10月2日
Hi everyone, Jonathan back again here
with what looks rather suspiciously like a vicar's gun
And I'll put you out of your misery
if you've been playing our little guessing game over on social media
It is a vicar's gun
So you could always be right just by saying vicar's gun
But you know us by now, we like to choose unusual things
Now this isn't actually that unusual
But a lot of attention
Well, the vast majority of attention on the vicar's gun
Is in its ground role
I think it's safe to say
And certainly when I was thinking about what this is
Which is an aircraft gun
I'll just get that out of the way
I wasn't very familiar with what the different adaptations would be
To run a vicar's gun on an early airplane
Now unfortunately this thing is not quite complete
And it's oddly enough
We have some weird little dirt keys on here
That you wouldn't expect to find
And probably aren't on
Not on most guns, put it that way
But there's a very obvious thing missing
And that's what's called the loading handle
Now that was, it's called loading
Specifically, that's not just some weird British quirk
It not only connected to the crank handle
To actually cock the gun
It also pulled back the moving parts
The whole assembly in the gun
Including the barrel
That comes to the rear to actually operate the gun
Why did this handle do that?
Well, this is a case of
This is a two-handed gun
We have to make it a one-handed gun
So you're sitting in a cockpit
You've got to cock your two guns
Either initially, as you head off on a sortie
Or once you've cleared a stoppage
You need to cock them
Well, you can't actually
Make a vicar's gun ready with one hand
But in this current configuration
You couldn't do that
Because you need to be able to pull the belt of ammunition
Across as you cock the gun twice
So to overcome that
The whole set of recoiling parts was
The lock was cocked
And the recoiling parts were pulled to the rear
And that essentially freed up the feed mechanism
Pulling the belt across with only one hand
That's what a loading handle did
That's why it's very frustrating
That we don't have one for this
The most common type
If you want to go and look this up
It was known as the Highland HY loading handle
And you had the type
Well, two main types
Type A and type B
One would
You'll see this if you see cockpit footage
And a very realistic aviation movie of the time
Or period footage
Depending on the installation
The handle would stick up or it would stick down
Now that's dependent on
Like ideally, you would want it vertical
So you reach and cock it like that
And the German equivalent guns
Were arranged like that
But in installations like the Sopwith Camel
Where you've got this cowling in the way
And you can't have a handle sticking up
So you have a handle sticking down
And you push it forwards instead
And it does the same thing
There's then a third type that's adjustable
So you can fit it into either aircraft
An SE-5 or a Sopwith Camel
So the handle's sticking up or down
It's a simple steel, flat steel bar
In a curved shape or a dogleg shape
With two nice walnut grip panels on it
And we'd really like one
If anyone has one
Or knows how to get hold of one
We'd love to get one to complete
This very nice air service gun
There is the question of sighting
We haven't got time to go into that really here
Except to say that the German guns
Typically did have sights clamped
To the cooling jacket as it now was
Some British installations did also have
A ring with a crosshair in it
On the gun itself
That's quite awkward
Because if you've got
It's alright if you've got one gun offset
So as on the SE-5
You just move your head and sight
Although increasingly they fitted the Aldis
They call it a telescopic sight
But it's non-magnifying
More like a very early
I won't say red dot sight
Because it was a crosshair
But you get the idea
So ideally you'd have a sighting system in the middle
Some pilots even use the bracing wires
As a reference point for aiming
Depending on how early you're talking
So sighting was a whole other issue
To get into
And it's correct enough
Depending on the gun
This would be installed into
For ours to not have sights on it
Just in case you're wondering
Other than the infamous
Interrupter or synchronization gear
For not shooting off your propeller
Unlike the Lewis gun
Which was used to shoot through propellers
Astonishingly
Without synchronization
Some of them were fitted
Angled off to miss the propeller
Or more famously over the wing
But early on 1915
Early part of 16
There was some RNAS
Bristol Scouts
That were just shooting
Straight through the propeller
And all they would do is tape it up
So that it didn't get too splintery
Absolutely astonishing
Not done for very long
But it was done
But the Vickers
As far as I know
Was always
By the time it was introduced
In the Royal Flying Corps
Royal Naval Air Service
It was always going to be synchronized
So we won't get too much
Into synchronization in this
It's very complex
And there are a number of
Different systems that were used
The Sopwith Cowper system notably
And the Constantinescu
Or Constantinescu slash
Dash Colley system
Is its full official name
And I don't know
What the contribution of
Colley was
Because he was more of a sort of
Official British establishment
Side of the name
George Constantinescu
On the other hand
Is a certified genius
Who did all sorts of stuff
Rock drill
He invented a rock drill
And the technology for that
Is what informed his
Synchronization system
As I started talking about it
Let's just kick off
With that right away
So we don't have the
Synchronization gear here
We do have one of those
Or at least part of one of those
Fitted to a gun on display
In our First World War display
In our main gallery in Leeds
If you'd like to come and
Have a look at that
We welcome that
What we do have though
Is the trigger motor
This is a type C trigger motor
Which is the 1917 vintage
Version of the motor
As they called it
And in very very basic terms
The CC gear as it was known
Constantinescu Collie gear
Was hydraulic
But it wasn't a
Straight forward
Incompressible liquid
Hydraulic system
Like a caterpillar digger
Or something
It was sonic pulses
Through liquid
Absolutely astonishing
Way above my ken really
But so by pressing
The firing control
On the control column
You were turning on this system
That would then send
A series of rapid pulses
Only the pulses
Would not happen
When the blade
Was in the way of the gun
And that was done
With a little cam
That is constantly
Sending these pulses
Tined correctly
With the propeller
So that the little lobe
Of the cam
Does not create a pulse
When the blade
Might be in the way
Very very clever
Doesn't quite make the gun
Semi automatic
I wouldn't say
It's neither fish nor fowl
It's neither
Truly truly fully automatic
But it's not really
Semi either
It's more like
An automated trigger
But you know
That's a debate for
Philosophical slash legal debate
That I don't really want to get into
Suffice to say
The way it does it
At this end
And you've got
The attachment points here
For the hydraulic hose
It simply drives
A little pokey thing
Piston eventually
Against the trigger
Of the lock of the gun
We'll try and get you
A view of that
So you imagine
This little piston
Doing its job
Bashing against
The trigger of the
By trigger I mean
The trigger on the lock of the gun
Not the conventional
Thumb triggers
That would normally be
Back here
That aren't here
Now the early type
Trigger motor
Did just connect
Straight to the back of the gun
And just poked the trigger
That was normally there
And I suppose
This is the point to say
The very early Mark I
Star
Vickers
Which is what the
Star denotes
Air service
Was even more of a ground gun
With a few bits on it
Than this
It actually still had
The sight bridge
Mounted to the top of this
Rear cover
Which looks a bit like
A sort of girder
If you look up a Vickers
I'm sure you'll see it
And a long sight ladder
Lay across that
And you flip that up
For normal use
Well in air service
You can't even use that
If you wanted to
So at first they just
Left the whole thing on
I think I've seen photos
Where there's just the
Attachment point on the cover
And then after a few months
I think it was
They started producing
Rear covers
Where there is no
Sight bridge
Not the correct
Component term for it
But that's what I'm calling it
In fact if I
Fully open the cover
You can see in here
The little piston
And the trigger
We'll get you a close up of that
So this thing is beating against this
Obviously it's not getting cocked
Until the gun has cycled
This is a recoil operated gun
So the whole barrel
And the side plates
Everything is moving
Back and forth inside the gun
And part of that cycle
Is to re-cock it
So by the time it comes back
The thing might be
It's pulsing away
Regardless of where the lock is
As I understand it
And then when the thing
Is fully in battery
And is in contact with the piston
Then that is the next shot
That's fired
This is my
Semi layman's understanding
As I say it's a very
It's actually a very complex
Bit of engineering
So the next feature
That I'll talk about
I've already spoiled
Because it's this
Leaf spring here
Now what you have to start
Thinking about here
Getting your head around is
The Vickers gun on the ground
Could be operated by one person
You probably have some issues
Especially without a
Suitable belt container
You've probably seen
Number two gunners on Vickers
Supporting the belt of ammunition
To make sure it goes in smoothly
Now that's part of the
Aircraft installation
Is a suitable chute
To properly support the belt
As it comes in
Again we don't have those
Attachments unfortunately
But back to this clip
Again we'll get you a view of this
So you can see the hook
That's on this side of it
All that does
You've probably figured it out
By now after I've already
Put it up
But you throw up the rear cover
And it isn't going anywhere
You didn't have this little spring clip
With the hook on it
This thing would
Collapse back down on your knuckle
I've just done it to my hand in fact
And these are quite sharp
So the main thing to bear in mind
You're not in a team of six
You're not even a team of two
Running a ground gun
You are one pilot realistically
If you're operating a Vickers gun
You are going to be a pilot
It's going to be mounted
Either on the engine
One or two
Partly accessible
Although as cowled in as possible
As time went on
Or it's going to be on
The side of the cockpit
If you look at the RE-8
Somewhat of a
It's not like a cutting edge
Fighting scout or anything
And it has one Vickers gun
Mounted to the left side of the fuselage
So you're having to reach over
The cockpit side
To do anything with this thing
To cock it
To clear a stoppage
Anything but fire it
Because you've got a remote trigger
To fire it with at least
And it synchronizes
It's not shooting the propeller
Great
So you're one person
Not multiple
You've only got one hand
There are stories of pilots
Letting go of the stick
Putting it between their knees
To do various different actions
None of those are great options
If at all possible
You want one hand on your
Control column to fly
And then realistically
With this RE-8 installation
You'd be doing all of this
Loading
Not so much firing
And then clearing any issues
That you have
Reloading
If you're able to reload
Or with your left hand
Not great if you're right-handed
As most people were
So this is great
Because instead of this
Flapping about
Bad enough on the ground
That this can sometimes
Close on your hand
And get in the way
But with an aircraft
That's pitching and rolling
You get the picture
Also the air stream
The slip stream
Blasting past
100 miles an hour or so
That alone is going to be enough
To keep this down
As you try to flip it up
So that's what that clip is for
There's one other little feature
That's a little bit similar
So that's not the only spring
That's in here
Additional spring I should say
Something else that was very useful
If you have to change a lock
And believe it or not
Pilots did change locks
This is the heart of the
Maximal Vickers system
In mid-air astonishingly
There's this
This connecting rod here
Will flop down
Now there are serrations on this
So that with your thumb
You can pull it up
But for air service
Something else that they did
Was add in rivet on
Another little spring clip
Such that that rod is pointing
Exactly where you need it to be
To whip out your spare lock
And lock it into place
And then it's just a
You can just overcome
The spring tension to get rid of it
And you can replace your lock that way
So tiny little component
Really quite important
If you're in the middle of a
Firefight in the sky
This is all a nightmare
To even consider doing
But they did it
So we've got those two features
Trigger motor we've covered
We have also got
So there's something called
The ferroto outfit
Now I don't know where
The word ferroto comes from
We've got the inventors
I'll tell you about at the end
Their names are not ferroto
So I don't know where this comes from
It crops up in the official manuals
And part of that kit
Is this spring clip
I don't know if the one
On the connecting rod
Is also part of that
We don't specify
But this certainly is
There's a piece of it we're missing
Which is a rod that's used
To actually clear jams
We can show you a picture of that
But we don't have one
I'm not aware of one
Anywhere else either
If anyone is
Please let us know
It would be easy enough
To make a replica one
And then the star
Of this ferroto outfit
Is this comedy spring
That's attached to the cross piece here
The spade grips if you like
At the back
Now this gun has only one grip
I've seen guns
In installations
Still with a complete back plate
Certainly when they're using
The early trigger motors
That still require the firing
Trigger at the back
So where this is fitted
You must have one of the grips
Because that's how it's attached
And this
The actual grip is extended
And this is shown in the patent for this
To allow you to attach the spring
And it just sits there
Looking not very pretty
So the 1917 manual
For the Royal Flying Corps
For the Vickers
For the air service gun
Mentions two of the four
Main Vickers gun stoppages
The second position
And the third position stoppages
Where this might actually be used for
In fact it specifies
The use of this spring
Which is confusing me
Because I have never once
Seen a photograph of the gun
On an aircraft
With this spring fitted to it
And yet by 1917
It was supposed to be standard
It's not mentioned as optional
It's just meant to be
In fact for the training purposes
The list of kit
For this training session is
Furoto outfit
So yeah
But we're still not there on this one
I might need to do some
Proper archival research
To fully figure it out
But we now know
So with a type 2 stoppage
Or second position stoppage
Your crank handle
Stops roughly about here
Watch Rich Fisher's excellent video
On Vickers gun stoppages
From the Vickers Machine Gun Research Association
The second position
Stops about there
The third position stops
Just above the
In battery position there
And these are visual indicators
That your gun has stopped
And there are different
Potential causes for that
We won't go into it
Watch Rich's video
But what this spring lets you do
You hook it over the crank handle
And it's your third hand
Basically it keeps the crank handle
In the position you want it in
For in particular
Clearing a cartridge
From the face of the breech
So a type 3 stoppage
Involves probably a distorted case
Or a separated case
And to get rid of the bit
That's still on the breech face
You would with the help of this spring
Pull it back to the rear
With the cover open
Use the other tool
That we don't have unfortunately
To get rid of everything
That's in the way
And then you'd be able to
Close it up
Remove the spring
And get it back into action
So in basic terms
That's what that spring is for
Very sort of
Keith Robinson
Feels quite British as well
So we're nearly there
The more basic adaptation
For the Harquant Star
Is to get rid of the water jacket
If you look at German MG 08
And LM G 08
Air conversions
For the Maxim gun
For air service
It's almost like a greenhouse
They've cut away
Most of the water jacket
Because you're not filling it with water
You're relying upon
The 100 mile an hour slipstream
To cool the gun
Which it did pretty well
The British approach
Was to cut holes in the front
A couple of different ways
This was done
So you've got air coming in
And then you've got louvers
Cut and dented
All around the water jacket
At the back
So turning it almost
Into a sort of
Not very good version
Of the ground Lewis's
Cooling radiator system
Only it doesn't have
The aluminium radiator inside it
It's literally just air flow in
Air flow out
So there's that
The advantage of this was
It was potentially easier
To reconvert back for
I guess emergency ground use
At least I think
That was the logic
And then we have at the front
So this is another
1917 vintage adaptation
The Hazleton device
So this is a specific form
Of muzzle booster
The Vickers always had a booster
You needed that additional
Muzzle gas pressure
To help force back
To add to the recoil
For reliable operation
But this was specifically designed
To increase the rate of fire
Now I've seen figures
Up to 850 rounds per minute
Claimed from about 600
550-600 was the standard
Ground Vickers rate
But actually the manuals tell you
That you should be aiming
For a rate of 600
That's still significant though
Because with synchronisation gear
Without a Hazleton device
To speed it up
You are only running around
400 rounds per minute
So significantly lower rate of fire
Lower rate of fire means
You've got less chance
Of hitting that aircraft
So still a very significant adaptation
So we've got an army of people
Involved here in modifying this thing
Never mind the designers and makers
And the final bit of tech on here
Which I really will have to move the gun
To show you
Is a round counter
Now this was quite a late in the day
Adaptation as well
Maybe late 17
I tell a lie
I do think this appears
In the 1918 manual
If I'm remembering correctly
And so this was
You would not preset this
With whatever your capacity was
Say 200 rounds
You would know how many rounds
You had loaded in your aircraft
And this would count up
And so when it hit
The limit of what you've taken out
With you
You'd know that your gun was out
And not just jammed
And the way it works is
Pretty simple
There's a rod
A rack and pinion
A toothed cog
And a toothed rod
That is attached to the recoiling parts
So to one of the side plates
That moves back and forth
As the gun moves
And it just shoves out
Through a hole in the back plate
And I can actually simulate that
Simply by
You can see there's a toothed cog
And if we are able to
Pull on the rod
This is rather awkward but
Pull it out and let it go
Simulating it getting shoved
So round counters
Still not really a thing
On military weapons at any rate
Except for internal ones
That are used for armourers
So that they know how many rounds
A gun or a barrel
Or whatever component you want to track
Has fired
Round counters, alien style
To know how many rounds you have left
Interesting that
That not only was a thing
But it was a thing in 1917-18
So I mentioned a patent for this
Which is amazing
Really happy to find that
Details the
Well at least
Sorry the Feroto part of this system
And that was invented by two chaps
With the most RFC names possible
So a Major A.C. Hartley
And a Captain Sir R.A. Coote
Brilliant name
Coote with an E
And that was patented on the 28th
Applied for on the 28th February 1917
The same two guys went on to patent
Their own form of synchronisation gear
Interestingly
Which doesn't seem to have caught on
I think the CC gear
Had already cornered the British market
By that point
So we know quite a lot about
Well we know quite a bit
About the Air Service guns
We know a bit about this
Bizarre Feroto system
We don't have very much about
Its actual use
This kind of spring thing
And the weird little tool
That we don't have
But there is at least one account
Of a pilot actually using it
Somebody managed to find
And post it online
Which is very helpful
I'll read from that
So that is
Ross Smith in a combat report
At the end of a burst of 100 rounds
That's very telling
Got a high number 3 stoppage
Due to a Mark 2 disintegrating link
Fouling in the feedlock
Stoppage cleared with Feroto Jam Clearer
So it was not only in the manual
It was actually used
But I'm still really hazy on
How many aircraft actually had it installed
Did Ross Smith have the spring aspect
Or was he just using
The handy little tool
Really still quite unclear
It's amazing the level of
The number of little rabbit holes
You can go down
On what is on the face of it
A very straightforward
Air Service adaptation
Of a very reliable
And established already by that point
Ground service machine gun
Thanks for watching everyone
I hope you enjoyed that one
There are ways that you can support us
But by far what we would appreciate the most
Well two things really
Firstly like and subscribe
And all that YouTube stuff
But secondly we do have three museums
That if you're in the UK
Now or in the future
You should definitely come and visit
If you are in the UK this summer
We have a series of
Elizabethan themed events going on
Horse shows in particular
And that culminates in
An Elizabethan version of the joust
Actual jousting with lances
Which is something that we are known for
And is well worth checking out
If you never have
Not many places you can do that
Also you can check out
Our various social media outlets
Through the website
So we really appreciate you
Catch you again next time
