The 7 Levels of Math Symbols

Math for our world
17 followers
There is about 116 universally recognised mathematical symbols and I'm going to explain every one of them.
Addition, 1 2 plus 1 2 equals 1 2 3 4. Boom!
Subtraction, if 2 plus 2 is 4 then 4 minus 2 equals 2.
It's addition, just backwards.
Multiplication, if I have a 3 by 3 grid of cells then I have 9 cells because 3 times 3 equals 9.
Division, if Johnny has 6 apples and 2 friends, how many apples does each friend get?
3 because 6 divided by 2 is 3.
But you struggle with division because you have no friends and you can't divide by 0.
Plus minus, we didn't know whether to put a plus or a minus here so we used both.
2 plus minus 1 is 1 or 3.
Minus plus, a plus minus b minus plus c equals a plus b minus c.
Or a minus b plus c, these signs remain opposites.
Equal, if a equals b means a is the same as b then a not equals b means a is not the same as b.
But we can get more specific than that.
We can write a is greater than b or a is less than b
and we can even put a little line here to indicate that a is greater than or equal to b.
Percent literally just means the exact same thing as divide by 100.
So if you're dealing with a difficult percentage problem then try moving the percentage sign around
because it doesn't actually matter where the percent sign goes and you can easily find the answer.
Degrees, 360 degrees is one full turn so 1 degree is a teeny tiny turn.
But you know what's even smaller than 1 degrees?
An arc second which is 1 degrees divided by 3600.
Powers, the nth power of a is just a times a times a times a n times
and the nth root of a is the inverse of this so the nth root of the nth power of a is just a.
Again, same thing just backwards.
Pi, Dr. Edward J. Goodwin an amateur mathematician from Indiana
claimed to have discovered a method for squaring a circle.
A famous problem that had already been proven unsolvable in 1882.
Despite this Goodwin was convinced of his own work and saw official recognition for his discoveries.
But rather than publishing a mathematical journal like the rest of us he took a different approach.
He tried to make it state law.
In 1897 house bill number 246 was brought to the Indiana General Assembly.
The bill effectively claimed to fix the value of pi.
The ratio of the diameter and the circumference is as 5 fourths to 4 which implies that pi is 3.2.
Amazingly the Indiana House of Representatives unanimously passed the bill on February 5th 1897.
Most likely because they saw it as a way to support Indiana's reputation in education and science.
The bill was then sent to Indiana Senate for final approval.
By sheer luck Professor Clarence Waldo was visiting the Indiana legislator on unrelated business
and when he heard about the bill he was horrified and immediately stepped in.
He had to explain to the house that one the bill is mathematically incorrect,
two it would make Indiana the laughingstock of the world,
and three mathematical constants like pi can't be legislated.
Or in other words just because Indiana says pi is 3.2 doesn't mean pi is 3.2.
Eventually Indiana had to accept the fact that pi was not 3.2.
But it makes you think, what if they did it?
Delta typically means difference.
For example the gradient of a straight line is the difference between the two y coordinates
over the difference between the two x coordinates or delta y over delta x.
Proportional.
If y is proportional to x then y equals kx where k is a constant.
Sometimes you might see a proportional sign flipped to indicate that y is inversely proportional
or y equals k over x.
Approximately equal.
I actually already use this for my value of pi because no matter how many decimal places you add
you can never actually write down the exact value of pi.
It will only ever be approximately equal.
Perpendicular.
Two lines are perpendicular if they intersect at a right angle.
Parallel.
Two lines are parallel if they're in the same plane and never intersect no matter how far they extend.
Angle.
Sometimes measured in degrees but can also be measured in radians where a full turn is 2 pi.
A is similar to B when A is the same shape but different in size.
You can also put a line under it to make it similar or equal.
Congruent.
A is congruent to B if they have the same shape and size.
The two arrow is used for a range of things from vectors to limits to mappings
but it generally always means two.
The line symbol shows an infinite set of points extending in both directions
without any end points, width or thickness.
Therefore, because.
The absolute value of a number is the difference between that number and zero on a number line.
The floor of a number is the value of that number rounded down to the nearest integer
and the ceiling is the value rounded up to the nearest integer.
The factorial of n gives you the number of ways of arranging n elements.
So the number of ways of arranging a deck of cards is 52 factorial or 8 times 10 to the 67.
For reference, the number of grains of sand on earth is 7.5 times 10 to the 18.
Sigma is typically used to talk about the sum of many terms.
The initial index is defined below the sigma and the final index is above
and the terms to be summed is on the right of the sigma.
Also, sometimes sigma can be used to define the set of letters.
Product works in the same way as sigma only we're multiplying instead of adding.
Contrary to popular belief, infinity actually isn't the biggest number
because infinity isn't a number.
Infinity is a concept that means unboundedness.
Aleph null is the smallest infinity and omega is the biggest.
Little d like delta represents the change or difference in something.
But when we're dealing with curved lines, the only way to find the exact gradient
is to make the change in x and the change in y infinitely small.
We represent this using little d.
Partial is almost the same as little d but we use little d to find the derivative
and partial to find the partial derivative
which calculates the rate of change with respect to one variable
while keeping all the other variables constant in a function with multiple variables.
Integral calculates the area under a curve by adding together
all the thin slices which make up the area.
It's an elongated version of the letter s which stands for sum
and it's also the inverse of differentiation.
Set theory.
Curly braces define a set as a list of its elements.
The most common sets are the natural numbers, the integers, the rational numbers,
the real numbers, the complex numbers, and the prime numbers.
And you can also say it's raining if and only if there is water coming out of the sky.
1 is an element of the set 1, 2, 3 because 1 appears in the set
but 4 is not an element of the set 1, 2, 3.
A union B is all the elements in the set A or B
and A intersect B is all the elements in set A and B.
A is a subset of B if all the elements in A are also in set B.
You can also put a line under the subset sign to signify that it's subset or equal to.
This gun symbol means not and a backslash means the set difference
which means all the elements in A that's not in B and it looks like this.
This means and and this means or, this means for all and this means there exists.
Curly P is used to denote the power set
and the power set of A is just a set of all possible subsets of A.
So if A is 1, 2 then the power set of A is the empty set,
the set of 1, the set of 2, and the set 1, 2.
A colon is used to represent such that or given and you can also use a vertical line.
So for example the power set of A is just the set of all S
such that S is a subset or equal to A.
The empty set is represented by the Danish o slash symbol
and omega is used in probability theory to represent the set of all possible outcomes.
I is equal to the square root of minus 1 so I squared is minus 1
and I to the 4 is minus 1 times minus 1 which is just 1.
The dot product of two vectors A and B where A is 1, 2, minus 3
and B is 4, minus 5, 6 is the sum of the product of the adjacent values.
So you just multiply the 1 by the 4 and then the 2 by the minus 5
and the minus 3 by the 6 which gives you 4 minus 10 minus 18 which is minus 24.
If A is 1, 2 and B is A, B then the Cartesian product is the set of ordered pairs
1 A, 1 B, 2 A, 2 B so the Cartesian product of A and B
is the set of all pairs of elements where the first is in A and the second is in B.
If F and G are functions then F circle G is the composite of the functions F and G
so you find G of X first then you find F of all of that.
The mean represented by mu is the average of a data set
which is found using this formula or as I like to say the sum over the count.
The standard deviation denoted by sigma is how spread out the data is
so if you find the mean using this formula then you find the standard deviation using this.
Tau is just 2 pi which some believe makes it easier to work with circles
so instead of finding the circumference using 2 pi r you just use tau r
or instead of finding the area using pi r squared you just use tau r squared over 2.
Okay maybe not that one but Terence Tau is pretty cool.
The golden ratio is 1 plus root 5 over 2 or 1.618.
The Raymond Zeta function equals the sum from 1 to infinity of 1 over n to the s
and it's also the product of 1 minus 1 over p to the s inverted for all prime numbers
so this is useful when working with prime numbers.
Bold h is the set of all quaternions and a quaternion is a number q which equals
a plus bi plus cj plus dk where i squared equals j squared equals k squared equals ijk equals minus 1
so ij equals k jk equals i and ki equals j.
Got it?
Bold m is the set of all matrices and a matrix is just a grid of numbers.
More on that later.
If a is a square matrix and x is a non-zero vector then the eigenvalue satisfies this equation.
A sequence space is a set of sequences that satisfy specific conditions.
For example if L infinity is the space of all bounded sequences
then sequence x sub n equals minus 1 to the n belongs to L infinity
because x sub n is bounded between minus 1 and 1.
The Weierstrass elliptic is this formula here and it's used in complex analysis
but it's not used in hippopotamus so honestly it's not worth my time
and that's definitely not because I don't understand it.
This funny symbol just means section for example see section 4.2 for proof
Core product is the opposite of the cartesian product
so if the cartesian product joins the elements of a and b together
then the core product keeps them disjoint.
Nabla is used to denote the gradient of a function as a vector
which points in the direction of steepest increase in that part of the function.
So if f equals x plus 2y plus 3z then nabla f equals 1 2 3.
If a precedes b then a is in some way of lower order than b
but it doesn't necessarily mean that a is less than b.
For example we can write the set 1 precedes the set 1 2
because 1 2 has more elements but that doesn't necessarily mean
that 1 is less than 1 2.
Instead of saying that from Peano's axioms we can prove 1 plus 1 is 2
we can just say that Peano's axioms entails 1 plus 1 is 2.
So the statement gamma entails phi means that phi is provable
from the set of assumptions gamma.
Semantic entailment just means that phi is true in all models
where the assumptions gamma hold.
Aleph null is the smallest countable infinity
and it's equal to the size of the set of natural numbers.
The size of the set of real numbers is 2 to the power of aleph null.
Beth null equals aleph null which is the size of the set of natural numbers.
Beth 1 equals 2 to the power beth null which is the size of the set of real numbers
and beth 2 equals 2 to the power beth 1
which is the size of the power set of the real numbers.
So in general beth n plus 1 equals 2 to the beth n.
If R is the table with columns EmployeeId, Name, and DepartmentId, and S is the table with columns DepartmentId, DepartmentName,
then R join S is the table with columns EmployeeId, Name, DepartmentId, and DepartmentName.
The DepartmentIds just get joined together into one table.
So if A is this 2x2 matrix here, then the conjugate of A is the complex conjugate of each of the values in A.
And A transpose is what happens when you take the rows of matrix A and turn them into columns.
A dagger is what happens when you do both, and it doesn't matter which way around you do them.
Double dagger is used as a custom operation, and it can mean anything, and diamond P is possibly P.
If V is the vector 1, 2, and W is the vector 3, 4, 5, then to find the tensor product of the two vectors,
you lay the first vector along the side and the second along the top,
and then multiply the rows by the columns to find the cells in the resulting matrix.
If A and B are matrices, then the Hadamard product of A and B is just the element-wise product of each element in the matrix.
The symmetric difference of A and B is A subtract B union B subtract A, and it looks like this.
The top symbol is used to mean always true, for example, P or not P is always true,
and the bottom symbol means always false, for example, P and not P is always false.
The gamma function is this function here, and it helps us to build a continuous function for the factorial of n.
The chi symbol is used in Euler's characteristic, which is vertices minus edges plus faces,
and it's equal to 2 for all three-dimensional polygons.
Kappa stands for curvature, and it's found using this equation.
The Fourier transform takes a function and breaks it down into the sum of sine and cosine waves of different frequencies.
The Laplace transform takes a function of time and converts it into a function of a complex variable,
making it easier to solve differential equations.
A Hilbert space is like an extended version of 3D space,
but it can have infinitely many dimensions and applies to functions, signals, and complex numbers.
Here's a meme to explain how it works.
Epsilon is used in the definition of limits.
Think of it as a very small number, which represents how close you want a function's output to get to a certain value.
In topology, curly N denotes the neighborhood of a point P, which is a set containing all points close to P,
and curly T represents a topology where a mug equals a donut.
Curly M represents a manifold, which is a space that looks like regular Euclidean space locally,
but can have complex properties globally.
In game theory, curly A represents the set of actions, decisions, or strategies available to a player.
If A has eigenvalues lambda 1, lambda 2, lambda 3, and so on,
then A equals P lambda inverse P, where P is the matrix of eigenvectors,
and lambda is the diagonal matrix of eigenvalues.
In complex analysis, psi denotes the complex potential or special function,
such as the digamma function, which is defined as the derivative of the log of the gamma function.
Click on this video if you want to see more, and piss off.
Finally.
Finally, it's over.
Yes!
