Lovely ring with double wire herringbone | simple making jewelry at home 1110

Materials I used : Soft copper wire :
20 gauge ( wire diameter 0.8mm ) : 22cm ( about 9 inch) for the ring
28 gauge ( wire diameter 0.3mm ) : 40 cm ( 16 inch)
Beads : 6mm ( abacus crystal )
If you are making a ring with a diameter larger than 1.7cm, you should use a 25cm ( 10 inch) long wire for the ring.
Bend the main wire so that the small wire still hugs the crystal bead after creating the ring.

This is herringbone weave, is a basic technique. It has so many variations, just change a little (wire size, number of loops, combination of beads, combination of textures ...) you have a lot of different products.
Samples using the herringbone weaving technique I have done
Jewelry applies herringbone weaving technique : https://www.youtube.com/watch?v=Sy0LJ6TFNm8&list=PLx4k6akdDBsH0zwtRQsXXMIJdX2mRBjy4

You can refer to other models on LanAnhHandmade channel
Flower ring : https://www.youtube.com/playlist?list=PLx4k6akdDBsF7f_pHkv5XCAYtRMoDD6tX
Simple rings for beginners : https://www.youtube.com/watch?v=AaV91Sed2SU&list=PLx4k6akdDBsEbePTdwBIXdLHyGKTS0_8Z