In this WoodStory we gear up for the summer harvest by crafting fun and easy garden baskets! Perfect for picking vegetables and herbs, these baskets come in two sizes with a simple print-at-home template included. Using simple woodworking tools you likely already have, I’ll guide you step-by-step to create your own. Now go grab your tools, and let’s start this WoodStory!
In today's wood story we are building garden baskets and I'm going to show you how you can
build two different sizes but the best part is that this is a very simple beginner-friendly
project that only requires simple tools and most likely you already have the supplies in your shop
so go grab your tools and let's start this wood story. In order to make this garden basket I've
actually made a couple different sizes available to you. You can make a larger one which will end
up being 15 by 12 or you can make a smaller one which will end up being approximately 12 by 9
and the benefit of each of these is you know you might need a larger one for a ton of different
vegetables or maybe you just want a smaller basket for some herbs or maybe you want to make both
that's always great as well. In terms of materials you will need a little bit different depending on
which one you are making. If you are making the larger ones you are going to need to connect three
different fence pickets together because fence pickets usually measure just a bit more than five
inches but we want to cut off just a little bit of a seam over on the table saw so that we can glue
these together. If you however are making the smaller one you only need two so there are some
benefits depending on how much wood you have. Now one little tip and trick for you if you end up
making the larger one and you have these three fence pickets that are next to each other you
actually only need the middle one to be the long one because that's the one that has the handle so
you can save on materials by cutting the other two a bit smaller like they only need to be about
nine inches and the last one I would probably leave it 13. You're going to end up cutting it
to 12 at the end so just a way to save on material as well as you're going through. You will need to
make two of each we need two sides so let's get started with that by trimming off some of these
sides here and then we'll do some glue ups. I'm using leftover scrap cedar pickets that I had
left from a previous arch planter box project. Either way you can check out that video right
here via the link in the upper right corner but because I'm using scrap wood my length here is a
little too short to fit two of each of the templates because I'm making both the large and the small
basket but after some thinking I found a creative solution by simply switching a few of the pieces
around and cutting them to some interesting sizes. So I went ahead and I cut off the edges
as I talked about over on the table saw and then I just chopped these pieces to approximate size
so that I can have enough for enough wood to trace two templates but before I trace them
I'm going to glue them up so I have two of my longer ones to 15 by 12 and I have two of the
12 by 9 and they're just the two boards and these other ones are the three boards and that's what I
meant about saving on wood you just need to leave the long one the middle one long in order to
connect this so save on some wood whenever you can and you know every dollar saved is a dollar
gained right. Just went to go and have lunch I let this sit in the clamps while I had lunch so it's
been half an hour so hopefully it's nice and dry I'm not running this through the plane or anything
like that because that could be too soon to do that in terms of the glue up so let it rest
ideally it should be resting for 24 hours but I'm not going to wait that long especially because
we're just cutting out the template so it won't be too bad. So with these out of the clamps we can
start to trace up our little shapes here and if you want to save time you can use double-sided
tape and connect two to each other and then cut them out at the same time that's definitely going
to save a lot of time which is always great. For the double-sided tape I like to use exfasten tape
it's inexpensive and it works really well I'll leave a link below if you're interested
I cut the shapes using my bandsaw but you can absolutely just use a jigsaw
or even a scroll saw whatever you have in your shop use that.
While the pieces were still taped together I used a drill with a forstner bit to cut
a three quarter inch hole this will later be used to feed through a dowel
I also cut some 1.5 inch strips of cedar these will be for the cross bars for the basket
now the length of these is really up to you the longer the bars the longer the basket will end
up being but I decided to base the length off of the ends so for the larger basket I cut them to
15 inches in length and for the smaller one I cut those to 12 inches in length
this project really doesn't require a lot of sanding but I did run everything through
with an 80 grit sandpaper just to smooth out the bandsaw marks and then I curved the edges
slightly by using my handheld router but note I only did this for the sides that are going
to be facing outwards so putting this basket together I find that the trickiest part is
actually just maneuvering this chicken wire here because it's kind of sharp the sharp edges
and you kind of just have to cut a piece that's a little bit oversized to begin with
in order to be sure that you have enough so what I like to do is I've already taken my stick here
this is the long one that's going to go between the pieces like this so I take this one and I
make that the full length of this so I make sure that it covers on both sides because we're still
going to need this to line the edges but then after that what I do is see if I can show this
falling on me I bend over the one side here push it down just so that these little sharp
things that I've cut off doesn't get into people's hands that wouldn't be good and then what I'm
going to do is I'm going to take this and I'm going to staple it to this and as you can see
I've kind of cut out these notches here on the side because we need this side right here to lay
up against this corner right here so I don't want any of this wire to interfere with that
so that's why it has this little nudge cut out here on each side so I will go ahead and staple
this in now like this and that way when it is sitting in the basket it's going to be like this
but it's not going to poke anyone's hands when I get to the other side I'm going to do the same
thing I'm going to push it back down and then I'll also stable that one but I'm not going to do this
one yet because I need to see exactly how much I need so essentially this will go on first then
I'm going to take this piece place it up against here measure by rolling it around taking my point
and then I'll cut it a little bit oversized because I'm going to bend it down and I'll do
the same thing on this side and while I attempt to wrangle this chicken wire here I want to take
a quick minute to say thank you so much for watching this video and I would love it if you
could leave a comment below and let me know where you're coming from are you a woodworker a hobbyist
a diy or are you just someone who really loves watching how-to videos recently I did a deep dive
into my youtube analytics and it turns out that 85 percent of people who watch my videos are not
subscribed and if you happen to be one of these people then I would absolutely love it if you
would consider subscribing it's a huge help to content creators such as myself to boost my
channel and you will earn my eternal gratitude thank you for considering it is time to assemble
our garden basket and in order to assemble that we need to connect the two outside pieces and I
went ahead and I decorated the outside with a little bit of a laser graphic just to you know
make it a little bit of extra fancy so if you have that ability it's always a great idea to
personalize it or just add something extra that will make your product stand out when you do go
to sell it one thing to keep in mind is when you are assembling them make sure that your graphics
are obviously on the outside or if you're not doing that your router side needs to be on the
outside so just keep that in mind as we assemble them the idea here is that this little netting
we've already attached it to the one side it's going to sit between these two pieces and it's
going to wrap all the way around so because we already did the one side we are going to use that
one to begin with so I'm just going to lay this down here and it can be a little bit tricky here
to get it started because we're going to use a brad nailer you don't have one you can also just
use a regular nail you can even screw it just make sure you do a pilot hole first so that your
holes don't split or your wood doesn't split but essentially what we want to do is we want to have
the outside outside we want to line it up on the net here and then the other side that we've already
connected we're going to lay it like this and then we're going to brad nail it in but in addition to
that I am going to add a little bit of glue just to hold it long term and this is outdoor glue
because this might be left outside so safety first I'm going to put on my safety glasses because we
will be using the brad nail in just a second so we add a little bit of glue then try to line it up
the best that I can just so that I have a little bit of play and then I'm gonna add that and then
I'm gonna attempt to get a brad nail in here making sure my fingers are out of the way
okay so that's enough to hold it in place and the longer the brad nails the better you obviously
want to make sure that they're more than the uh the width of whatever wood you are using so that's
the first one and we're gonna do that to the other opposite side as well again making sure that this
is on the outside so I'm gonna add a little bit of glue and then I'm gonna line it up oh and I see I
have a little bit of problem here I didn't catch that before but I actually went a little bit too
far out and this is where I was saying you need to have enough distance um to not have this little
netting in the way which I now do I was not being careful enough it's actually better to have a
little bit more on the inside than on the outside because otherwise you'll have these gaps you want
to avoid that I'm just going to pull that one out okay all right let's try that again
that's better that's a nice tight fit remove the excess glue spill out so now we have the one side
done but we're obviously not done and we did leave it um estimated the length that we need it
but you need to double check that now so what you're gonna do is you're just gonna lay it on a
flat surface again and then you're gonna take it all the way around just to make sure that this is
accurate and it's okay if it's too uh if there's too much you can always cut it off but it's
obviously not a good thing if you have too little then you would have to take it off and and start
again so that wouldn't be a good thing so hopefully you did it properly but what I like to do is
before I add this one I am going to add the netting with a couple of staples that's the word
staples we're going to wrap it around and we're going to make sure that this is sitting right on
the outside I don't want it to go over I want it to stay right here in the middle and as I am um
holding it I'm making it tight and I'm just adding a couple of staples here just to guide it along
and I like to just leave a little bit of play at the top here
okay now that we have those in place I can add my other board here and this one I'm just going to
add in like before with this underneath here and again this is your last chance to double check
that this is the right size if you need to make adjustments do that now and same thing here I can
see I need to cut off one more or it is going to get in my way which I really don't want it to
cut that one off too tuck that in and then again I'm going to add some glue
and then now the only thing we have to do is just stretch it all the way in this netting here
make sure it's nice and tight and then just use the stapler again to secure these ones
and I like to just use my hammer to hammer them down because sometimes the staples don't go all
the way in so you can see the netting sometimes it just needs to be bent a little bit more so you
can kind of play around with that just manually bend it and then you can add a few more staples
to the side here now that it's fully in place there we go now we're just missing one thing
and that's of course the handle we need to add a dowel in between these two and I made my hole
three quarters of an inch so I need a dowel that is three quarters of an inch today we're keeping
it simple I picked this up this was like nine bucks at my local hardware store and this will
do more than enough and it's already the right size or at least it's supposed to be so I am
going to feed this through and take a measurement and then I'm just going to be using a little
coping saw a little handheld saw like this one just to cut it off that will take like
two seconds to do and then add a little bit of glue and done
once the dowels were cut to size I added some CA glue and activated to the inside of the basket
the fit was honestly so tight that I doubt any glue was needed for the dowels and with that done
the large and small basket was ready to collect flowers it's currently tulip season where I am
so of course my wildflower fields were in full bloom ready for endless picking these baskets
turned out great and bonus I got to use scrap leftover wood which I already had and with just
a few simple tools you can make these baskets too thank you so much for watching and please don't
forget to hit that subscribe button so that you don't miss my next video and you'll also earn my
eternal gratitude and you can also join me over on my Patreon page if you want to continue to
watch behind the scenes content and have some nice conversations with fellow woodworkers and DIYers
comment below how would you personalize this basket or better yet who would you build one for
I am personally planning on gifting one of these to my mother-in-law who happens to be a huge
gardener and the other one I'll keep for myself I'll see you soon in the next wood story