Carved frame part one, wood carving

Eternal Sculptures
211 followers
Jul 15, 2025
Hello friends! I drew a picture.
I will cut such a frame today.
On such a panel.
I made it about 5 years ago.
So it is in my workshop.
It is shifted back and forth.
So it's time to finish it.
Of course, to make a frame.
It is a bit complicated.
What is the complexity?
The complexity is in the vegetation.
In these transitions.
But I will cut.
At the same time, I will explain.
So who wants.
Of course, he will understand.
And will be able to repeat this thread.
I interrupt with a calculator.
Drawing.
On the workpiece.
On the outside.
I will cut with a jigsaw.
And where I drew with a pencil.
There I will mill with a milling cutter.
In principle, you will see everything step by step.
The whole process.
So I wish you a pleasant viewing.
I'm starting to work.
I start with these central curls.
I take a semicircular cutter.
And I start to lower in this place.
Here I cut.
And I lower.
I got a pretty deep selection.
If you compare with milling.
The depth of the milling is 8 mm.
Here it is about 10-11 mm.
On the inside.
Now I will make a selection here.
With such a small cutter.
Here I cut.
Here the arc is larger.
Therefore, with another semicircular cutter.
And I start to lower here.
The closer to these leaves.
The stronger the bottom.
And now I'm starting a little.
This curl round.
By the way, at the same time.
I will lower this leaf a little.
It prevents me.
Round a normal curl.
I make a selection here.
So that it is below the depth of the milling.
Now here.
I cut a little.
And at the same time.
I round this element a little.
I stayed in this network.
Pimp.
I cut it a little.
Like this.
And on this.
Everything.
I switch to these elements.
Here a little.
I cut.
Here is such a selection.
And another curl.
And round.
Curls are cut.
I proceed to the leaves.
By the way, I already made this part.
On this side.
It will be ready.
Now.
I cut here.
And I lower this leaf.
A little.
Down.
And this part.
I lower a little down.
It is not convenient to do this with a straight chisel.
It is better to do some.
Round.
After I finished.
I begin to round.
These leaves.
Curl.
Do not hurry friends.
So that nothing is chipped.
Then glue.
It is better to do it right away.
Without any glue.
In this leaf.
I also make a cut.
I remove a little.
Here, friends.
See how I bend the cutter.
It will be so far.
And so.
A little here already.
I separate two leaves.
One from the other a little.
At the same time.
This long leaf.
I round it.
Rounding only on one side.
It's time to do.
A little corner elements.
I separate the curl.
From the leaf.
I cut a little here.
And I deepen here.
I cut a leaf.
Here I lower.
A little.
As if it is from it.
From under it grows.
Here.
I make a selection.
And yet.
You need to round it.
I will lower.
This leaf a little down.
This one a little down.
I will lower.
From the edge.
And at the same time.
I will round this whole curl.
Now with the help of a corner.
I'm a little.
Here.
I also lower.
Down.
At the same time separating.
These parts.
One from the other.
Here I also.
I lower down.
Here I do.
A semicircular pattern.
Selection.
By the way.
The selection will be quite deep.
First.
Big semicircle.
Then.
Small semicircle.
To be able to climb.
Deeper.
And I start here.
Unscrew.
This leaf.
Then at the end.
I lower down.
Pretty much.
I lower down.
And here.
Small chamfer.
Remove.
To be no sharp.
Curls.
I tried on the panel to the frame.
Looks pretty good.
Even not fully cut frame.
But it already looks spectacular.
The bottom is ready.
By the way, I wrote in the comments.
That these places can be cut with a jigsaw.
In the future I will show the frame.
Through thread.
And simply milled.
It looks pretty good.
In the next video I will do the side.
Here I am a little.
Some elements added.
On the leaves.
And pulled them out.
So this side should be.
Longer.
Still.
Here a quarter need to choose.
I just attached.
To see how it looks.
On the wall it will look gorgeous.
Who liked the video.
Like.
Do not forget to subscribe to the channel.
Good luck to all friends.
See you.
