How to Sketch a Portrait - Woman with Charcoal

Pencil Art
23 followers
In this lesson, we'll take a look at creating a portrait sketch of a woman with charcoal in about an hour.
Hello there, everyone. Matt here with TheVirtualInstructor.com.
And in this lesson, we're going to take a look at creating a charcoal sketch of a woman
using vinyl and compressed charcoal on white drawing paper.
Now, I complete my drawing within an hour.
But if you want to spend more time on your drawing, that's absolutely fine as well.
So we'll start by taking a look at the materials
and then we'll go through the entire process.
So let's go ahead and get started.
For this drawing, we'll be working with vine or willow charcoal,
which is very soft and brittle, but easily blended and removed from the surface.
We'll also be using compressed charcoal in the form of a charcoal pencil.
These marks are going to be very dark, but a little bit harder to erase.
We'll also be using a blending stump.
You can use a blending stump or a blending tortillon.
And we'll be working with a couple of erasers, a kneaded eraser
and also a vinyl eraser for more precision erasing.
We'll get started here on the white drawing paper, and I have planned out
my picture plane so that it's proportional to the photo reference,
meaning it's the same shape.
I can use the edges of the picture plane to begin to figure out the outer edges
and contours of the woman's hair here, starting with a vine charcoal stick.
You'll remember that vine charcoal is very soft and easily blended,
and it's also easily erased.
So in these early stages of the process, we can be very loose with our marks
and make corrections as we see fit.
You'll see now that I'm planning out the hairline
and I've also drawn a line down the bridge of the nose.
This will help me figure out where the center of the face is located.
As I'm making these marks, I'm making comparisons between the shapes
that are beginning to develop and the edges of the picture plane,
ensuring that these shapes are as accurate as possible.
I'm also adding small bits of different areas of darker value,
indicating areas of shadow.
With charcoal, we don't have to really be too concerned with the lines that we see.
Instead, we're going to focus more on the shapes of value and tone that we see
and allow the details to emerge gradually throughout the drawing.
Now I figured out where the edges of the face are located.
And then from that information, I can figure out the edges of the neck.
Working our way down to the shoulders,
you'll notice that I'm holding the stick of fine charcoal at the very end,
using almost the side of the charcoal to make these marks.
These will make broader strokes, allowing me to fill in shapes of value quickly.
If you held the charcoal stick like a traditional pencil,
you'll create lines in the surface of the paper.
And sometimes these lines are hard to erase or remove.
And it also forces you to be a little bit stiffer.
In the beginning stages of a charcoal drawing,
we need to stay loose and move almost our entire arm as we make marks.
Now, at this point, you can see that I've got quite a bit of tone and value
on the surface, and it's time to start blending some of these applications.
Blending will not only smooth out the transitions of value from dark to light,
but it will also work some of the material into the surface of the paper,
creating a lighter gray.
At this point, we're starting to develop some of the middle values that we see.
Now, when we're working with the blending stump,
we need to still consider the blending stump to be a mark making tool.
We can use it almost like a brush and pull the material
into different sections of the drawing.
Now, this particular drawing or subject presents some unique challenges
that we need to keep in mind.
Of course, anytime we draw a portrait,
it's essential to focus on the features of the face.
And we know that every face is different
and all of the features on each face are going to be different as well.
This, of course, is a challenge in itself.
But for this particular subject, we're looking up at the subject,
meaning that the vantage point of our viewer is below the head.
This is going to create some distortion on the face,
meaning that the facial features are going to be in a slightly different location.
You can see that the mouth and the nose and the eyes are further up on the head
than they normally would be if we were looking at the subject head on.
It's important to keep these relationships in mind as you develop your own drawing.
And it's also important not to shy away from challenging subjects like this.
Drawing or painting challenging subjects actually improves
your drawing skill or painting skill at a faster rate
than continuing to work on subjects that are easy or familiar to you.
So don't be afraid to challenge yourself.
Now, after blending some of the charcoal with the blending stump,
you can see I've gone in with the needed eraser and lifted out
some highlights or lighter values.
The eraser, of course, is an important tool in working with charcoal.
So as we add charcoal to the surface, we'll also remove it in areas
to find the appropriate value and the appropriate shape of value
that we need in each section.
Now you can see I'm using the charcoal stick more like a pencil
since I'm focusing in more on the details.
We're starting here with the eyes.
Now, it's important to be patient through this process and not get frustrated.
You can see my eyes look similar to what we see in the reference,
but by no means are they completely finished.
I'll continue to add little bits and smaller shapes of darker value
and continue to blend these applications with a blending tool.
Keep in mind that as you apply charcoal to the surface,
especially vine or willow charcoal,
it will appear lighter in value once you blend it with their blending tool.
Now, I'm spending a few minutes here working with the nostrils,
trying to get the shapes in place
so you can see that I am pushing and pulling these values.
What I mean by that is I'm adding some dark tones,
I'm doing some blending, and then I'm also erasing out as well.
I like to refer to this as pushing and pulling,
since we're basically pushing the values and also pulling them back as well.
It's important here as well to consider the shapes of value that you see.
In fact, this is a reoccurring theme in any charcoal drawing
or really any painting as well.
We're going to continue to work on getting the shapes of value right
rather than the edges of the details that we see on the face.
Gradually and slowly, the illusion of a three-dimensional head
and face will emerge from the surface.
I like to think of this process in the same way I think of working with a ball of clay.
You start with a ball of clay and you continue to mold it and move it around
until gradually the details of your sculpture emerge.
This is very similar to working with charcoal.
With charcoal, we put some information on the surface
and then we use our tools, our eraser, our blending stump,
and additional charcoal to continue to mold the illusion of three-dimensional form on the surface.
So it doesn't all happen at once.
It's a gradual process.
Here you can see I'm going back again with the kneaded eraser and then the blending stump.
Now, just a few minutes ago, our eyes looked completely different than how they look now.
And you'll notice that the drawing goes through multiple stages.
This is another important thing to keep in mind when you're working with charcoal.
Patiently work through each part of the process, allowing your drawing to evolve.
And don't feel hurried or that you need to develop details immediately.
Allow things to just slowly develop.
Now you can see that I've switched over to a charcoal pencil now.
This is compressed charcoal, so these applications are more permanent.
This means that at this point in the drawing, when you switch over to a charcoal pencil,
you need to feel pretty confident about the shapes of value that you have in place,
since it's going to be more difficult to manipulate the compressed charcoal
compared to the vine or willow charcoal.
Here I'm developing some of the details in and around the eyes.
Of course, the eyes are an important part of any portrait.
So I like to start there when I begin the process of developing details.
At this point, my blending tools have a little bit of charcoal on them already.
So I can use them without having any charcoal in place to make some very light marks in areas.
I can also use the blending stump to pull out some of the charcoal to create smoother transitions and soften edges.
Now, working down from the nose, we'll move on to the mouth.
And I've switched back to the vine charcoal initially,
just darkening up the edge where the top lip meets the bottom lip.
Then it's back to the eraser here, erasing out some highlights.
We can use our blending tool to define the edges of the lips,
and we can also start to remove some of the areas of highlight, making the lips look more three dimensional.
Remember, it's the relationships of values that ultimately lead to the illusion of form.
Value is the darkness or lightness of color.
It's one of the seven elements of art, and in my opinion, it's the most important element of art.
When we have a full range of value, that's where we create the illusion of form, which, of course, adds to the realism.
So we need to have the darkest darks, the lightest lights and a full range of grays in between.
Of course, we're still developing that range at this point.
But as we tackle each feature on the face, we need to be considering the range of value in each section.
Now I'm going back to the eyes and making some refinements here, again, adding some areas of lighter value
and also using the blending stump to smooth transitions between light and dark.
Now we'll go ahead and define the edge of the face a little bit further, again, switching back to the vine charcoal.
We'll also make portions of the hair a bit darker, again, using the side of the charcoal.
And we can do this now with more confidence, because at this point, I'm fairly happy with the locations of the features
and I can be a little bit more bold or darker with the applications that I make with the charcoal.
Now, of course, you could choose to use compressed charcoal here, but keep in mind, it's more difficult to erase.
And my plan is to do some more erasing in the hair after these initial applications.
These strokes are made in the same direction as the hair grows for continuity and also to help create the illusion of texture.
Now we'll get back to the lesson in just a minute, but if you're enjoying charcoal, then you'll definitely love the course,
the charcoal drawing course, which is available at the virtual instructor dot com.
In this course, we cover a variety of subject matter, including portraiture, animal portraiture, landscape and still life.
And for a limited time, I'm offering this course at 20 percent off the regular price.
There's a link in the description below.
Just use the promo code course 20 at checkout.
And as we fill in the shape of hair, we can take note of the areas where the value gets darker.
There is quite a bit of variety here, of course.
Now, after we've got the basic shape of the hair in place, it's back to the eyes again, making a few refinements,
paying attention to the smaller shapes of value that we see.
So essentially, we started with the larger shapes of value and now we're working down to the smaller shapes of value.
Again, not concentrating on lines, per se, but the shapes of value that we see.
Now, let's refine the edge of the chin a little bit further.
It's quite a bit darker there than the values we have in place.
So with a bit of the vine charcoal, we'll go ahead and make a pretty liberal application and then blend this with the blending tool.
You can see here how easy it is to blend and smooth transitions and also alter the value slightly by using the blending tool.
At this point, our drawing is starting to develop a full range of value and we're starting to understand the subject quite a bit more.
But we still have quite a ways to go.
We'll work our way down to the edge of the dress and we'll go ahead and create a line there.
And then we'll also put in some of the variations of darker value that we see along the collarbone.
And then, of course, these transitions are nice and smooth, so we'll need to smooth them out with the blending tool.
And we'll also need to erase some of the highlights out as well.
Now it's back to the edge of the face on the right side.
We'll put a little bit of charcoal there and then back to the chin.
Now, the reason why I'm not filling out all the shape of value on the hair is because I'm right handed and I'm still working on the features of the face.
I don't want to have a lot of charcoal in place there and risk the palm of my hand smearing my application.
Although you can see lots of smearing is still happening on the surface, don't let that bother you with your own drawing because all of this can be cleaned up in the final stages of the drawing.
Now you'll notice I've gone back to the eyes and this is not unusual.
The eyes, of course, are the focal point of this particular subject, so they need a little bit more attention.
But on top of that, once we have some values in place, we have a better understanding of the relationships of the values that we add and the values we already have on the surface.
So as we add more darks to the surface, you may find that you need to go back and make some refinements to some of the features as I'm doing here.
We need some of these details to be a little bit clearer and we need some of these values to be a little bit darker.
Now, keeping in mind that this is a sketch that's limited to only one hour, I'm going to overlook some of the details of the eyes and some of the further refinement I could do and go ahead and add some of the eyelashes.
Now, at this point, since we've got some of the details in place for the eyes, we can go ahead and fill in the rest of the shape of the hair and use a larger blending stump to smooth these applications and work the charcoal into the surface.
As we've seen throughout the process, as these applications are blended, the values become quite a bit lighter.
We'll start using the kneaded eraser to erase out some of the highlights here.
Our dominant light source is originating from the left.
This means that most of our highlights are going to exist on the left side of the subject.
These initial marks are fairly large and broad, but then we can clean things up and make this a little bit more detailed with the compressed charcoal pencil.
Here we can pull strokes as the hair grows and also darken up the shapes of darker value.
We can also begin some refinement at this stage.
Well, we've been refining throughout the drawing, but now we can do some finer refinement.
Like here, I'm adjusting the transition of value around the chin and also addressing the edge of the face on the right side, altering the edge just slightly.
Then it's back to the hair, adding some more shapes of darker value.
And as is the case with hair, most of the time you want to think about the hair as being a single form instead of small strands of hair.
You want to avoid making your hair look like spaghetti, so instead concentrate on the form of the hair in totality.
Now a bit more work on the chin.
Again, adding some of the material, blending some of the material, and also removing it, pushing and pulling those values until we get the value relationships and transitions that we need.
Keep in mind that we don't have to spell everything out for the viewer.
We don't have to include all of the details and we don't have to be overly controlled with our applications either.
This drawing can be loose and expressive.
Here, I'm continuing to work on the chin, getting those small little relationships of value in place as best as I can in the allotted time.
And then again, additional smoothing and blending with the blending tool.
Now again, it's back to the hair, refining some of the darker shapes that we see on the right side of the head.
We'll also pull out a few stray hairs to make the hair look a little bit more realistic.
The compressed charcoal does show more of the texture of the paper.
You can blend this out if you prefer or you can leave it to create a little bit more variety in the texture.
Sometimes I'll blend these applications out and sometimes I'll just leave them alone.
It's completely up to you and it's dependent on the subject and the feel that you want in your final drawing.
Now I'm using a very large stick of vine charcoal here to fill in the basic shape for the sweater.
I'm going to use diagonal marks here to keep focus on the face instead of adding details in this area.
We can refine the edge of the shoulder here just using the blending stump.
Then we give this a quick smudge and a quick smear just to give it a looser look.
Then I can use the kneaded eraser to clean up the edges around the outside,
allowing it to be a little bit imperfect.
This will make the hair feel a little bit more realistic.
At this point I decide I am going to do a little bit of blending and smudging here with the blending tool,
softening some of those compressed charcoal applications.
And then I'll do the same on the sweater at the bottom.
Then we'll continue to clean up the edges of the drawing here using the kneaded eraser.
And now I'm going to go back in with that huge stick of vine charcoal and add some more wispy hairs
and just some more areas of medium to dark value in the hair.
Then a last refinement here on the chin and a few more refinements here with the kneaded eraser.
And just a couple of adjustments to the hair.
And now at this point we've spent about an hour on the drawing and our loose charcoal portrait of a woman is complete.
Thanks so much for watching this video.
Hope you enjoyed it.
Hope you were able to pick up a couple of things here and there.
If you're new to the channel or if you haven't done so yet,
make sure you subscribe and click on the notification bell so you're notified when new videos like this are uploaded.
And if you want to take your drawing and painting skills to the next level,
then you need to check out the membership program over at the virtualinstructor.com.
There we have a variety of drawing and painting courses on a variety of subject matter and materials.
And we also do weekly live lessons, which are all recorded and stored in our vault.
You can go back and watch any of the live lesson series we've ever done.
These are broadcast weekly on Wednesday evening to eight o'clock
and then stored in our vault for you to catch up on.
We also do weekly critiques as part of the members minute.
And there's also a year long curriculum for visual arts teachers,
which includes everything you need to teach.
Now, all of that is included in the membership program.
If you want to check out the membership program, you can.
You can try it out for free for a week and then beyond that, it is extremely affordable.
So it fits everybody's budget.
I'll leave a link in the description below for you to check out the membership program.
And if you want to just check out three of our course videos and ebooks for free,
you can do that as well.
I'll leave a link in the description below for that as well.
That will put you on our mailing list so I can send you lots of free art lessons.
Thanks again for watching.
And as always, I wish you all the very best and your artistic success.
