Ehrenpforte (The Triumphal Arch of Maximilian I), 1515 (printed 1799) Albrecht Dürerexpand_more Woodcuts, etchings, letterpressexpand_more THE DRISCOLL ART ACCESSIONS ENDOWMENT FUNDexpand_more 2013.46
The Triumphal Arch of Maximilian I is a landmark in the history of printmaking and an impressive early example of propaganda. At the time of its initial publication, The Triumphal Arch was the largest print that had ever been completed. Though Maximilian I was not rich enough to complete major architectural monuments, he had the vision to realize the influence of a printed equivalent that could assert his right to rule as well as his ability to do so. Fully assembled, the print measures more than eleven feet tall by nine feet wide. With this acquisition, the MIA will have acquired in a remarkably short span of time the three great giant woodcuts of the Renaissance: Jacopo de’ Barbari’s View of Venice, Titan’s Red Sea, and Dürer’s Triumphal Arch.
This book is a bound volume containing the plates to an incredible print which,
when assembled, is 10 by 12 feet square. It was produced under the guidance of Albrecht Durer
in the late 15-teens. The Triumphal Arch of Maximilian is one of the greatest prints of
the Renaissance. It's a very impressive site and it goes very well with our extensive collection
of German Renaissance prints, especially the work of Albrecht Durer. The project required
about 190 blocks, that is wood blocks that were cut with these images that you see here,
and it was a tour de force. And so many of these were assembled and hung in city halls or in
palaces and as a result most of them were lost. But fortunately there was a reprint made in 1799
from the original blocks which are still housed in Vienna. Recently we had the opportunity to
purchase one of these bound copies with the intention of disassembling the book and reassembling
it as a giant print so that our audience could see what Maximilian and his courtiers had intended to
create way back in the Renaissance. In order to do that we have to cut this book apart which is
something that I am not really used to doing. I'm used to preserving books but in this case I
consider this a bound portfolio that has been waiting all these years for us to take the
individual elements apart and transform them into a condition where they can be assembled into the
original intended work of art. After cutting it we then sent it to our colleagues at MAC, the
Midwest Art Conservation Center, where Elizabeth Boucher took the individual sheets which we now
had and washed them. So what I'm doing right now is I'm sprinkling eraser crumbs, white vinyl eraser
crumbs, in order to pick up fingerprints and loose grime. I'm going to test the printing
inks for stability and water in order to clean the paper, water I prepare for the bath.
There'd been degradation of the construction of the paper so the sheets were various colors
and by washing them she took out the impurities and brought the sheets to a more uniform color.
When Elizabeth was finished with the process then it was time for our next team member,
Phil Barber, to get involved. Phil is in charge of matting and framing at the museum.
We gave him the tremendous task of cutting the sheets into smaller sections and reassembling
them into the giant arch. In order to facilitate this process we used the photographs that we'd
taken and made full-size reproductions of the sections of the arch so that Phil could
practice, in a sense, cutting them up, assembling them, figuring out how to put it together.
We also had to strategize because a 10 by 12 foot print is something that's difficult to store.
So we broke it down into six sub-sections that are small enough to put into large drawers for
storage but large enough so that when we move the print and reassemble it we don't have to
handle things repeatedly. What I'm doing here is this section right here and then I'm going to do
this section so they can fit in a drawer and if it needs to travel and they need to take it up
and down otherwise this thing is huge. The biggest problem I think I'm going to have is making it
straight. You have a tendency to kind of curve one way or the other. The impressions are still
really crisp. I mean when you see the cross hatching there I kind of go, huh? How do they do that?
You know that it's this crisp for as many printings as these blocks have gone through.
We put these sections on the wall and then we build the frame around the sections. If we
had the print in a 10 by 12 foot frame with glazing on it it would just simply be too heavy
and unwieldy to carry around. This allowed us to look to the future to make the object available
to our public and to make it possible to transport it so that we can lend it to other institutions as
well. This project was a real team effort. We needed many hands involved with it but they all
came together and undertook this project that allows us now to share with our public
this fantastic print that is very rarely seen in American collections.
This is truly a special event for me to be able to present this to our audience.