Thank you, to all my HWM YouTube Community for all your support and I will see you all soon. Thank you, HWM by, Lori.
Affiliate links for tools used. If you purchase i will get a few pennies for the purchase. About enough to buy a stick of gum :) It will not change the amount you made.
[Music]
Hey, Lori here. Today we're going to be
making a wreath attachment for a wreath
that we're getting ready to make. Now,
there will be a link to the
items that we're using. So, we're going
to be making cherries. Okay, so this is
what you'll be able to download.
Okay. So, two cherries and then the stem
and the leaf. I am going to show you a
way to um just use a stem without having
to cut it and make something. So, these
are all made just to print out on one
sheet. So, all you're going to need is
some scissors to cut it out.
Uh, one little note, don't use the
scissors that you use for your ribbon
because it will kind of mess them up. I
do find smaller scissors a little bit
easier to use. Uh, it just depends on
what works for you.
So, all you want to do is cut out the
pattern.
This is the easy part. Doesn't have to
be perfect.
So, it's kind of self-explanatory. You
just want to cut the pattern out.
These are all going to be the same. So,
See, that's super easy.
So, same thing with the leaves.
And you can use these patterns over and
over and over.
So, I have a trick for the stem. So, I'm
not going to cut the stem out because
I'm not going to need it.
And you can either cut the stem out or
you can use my trick,
but it's there if you want it.
Okay. So, I'll cut the rest of this off
camera just so you don't have to watch
it
and then we'll move on to the next step.
Okay. So, once I have the things cut
out, the next step is going to be to use
some of the poster board. So, you want
the kind that has the foam in the
center. This is from the Dollar Tree. I
do like the ones from Walmart better. I
just don't have one of those right now.
So, with the ones from the Dollar Tree,
they're black. So, I'll usually use one
of my white pencils.
And I'm just going to outline it. Now,
I'm going to make
four of these. So,
okay. And the reason is because I'm
going to have one for each side and I
want two of them. So,
I have two different size leaves.
I want to
I'll want two of each of these.
Once that's done,
I'm going to get out my foam tool. This
is the one I like to use because
it has a handle grip. It makes it a lot
easier to cut than if you use an X-acto
knife, but you can use an X-Acto knife.
I like to kind of
go ahead and kind of cut out.
Just makes it a little easier.
Okay.
If I just kind of separate them.
[Music]
So, I don't bear down real hard because
these can cut your mat.
They also cut a little bit cleaner if
you don't bear down real hard.
So, sometimes what I'll do is
get it started
and then come back through
and kind of cut it a little bit deeper.
I seem to get a better cleaner line if I
do that
cuz it's very easy to get off
from where you're trying to cut.
There's nothing very exciting about this
part, though.
It's just like cutting out the
the other piece. Then you can clean up
any little edges.
So, I tend to have problems with my
hands, so I kind of have to go slow.
If I get off, I just take it out and I
just kind of redo it.
There we go.
Okay,
there
you don't need perfection because you're
going to be covering these.
So, I'll go ahead and cut these out and
then we'll go on to the next step.
So, what I like to do is I like to use I
like to use some batting.
This is just thin batting. And this
helps to smooth it out. It makes it much
easier to put your fabric on. This is
just to me this is a necessary step. Um,
it really depends on
you whether you want to do that or not,
but I do. I like to have
batting because it does really make
things much easier and smoother for me.
Now, you can do,
you know, however you want.
You don't have to do this on both sides.
I do tend to like to do this on both
sides,
but this is a choice.
And a little bit of batting goes pretty
far.
Okay.
I just kind of eyeball measure it out.
So, you don't have to cut a shape or
anything like that.
So, you want to cut it about an inch or
so
outside of the seam or outside of the
line, I mean. Okay.
This doesn't have to be perfect.
Just want to eyeball it. You just want
to make sure you have enough on both
sides that you can
cover it.
Okay, there we go. We have all our
pieces cut.
So, the next thing we're going to do is
we're going to start gluing these
together.
And then we're going to also do our
fabric. So, we could go ahead and do
some of our fabric. Now, I have some red
velvet.
I love this stuff. You could also do
felt. Um, this actually came from the
Dollar Tree. This little thing of felt I
do love. This is stretch velvet. So, if
you get the velvet, you want to get the
stretch kind. Okay. And all you're going
to do is the same thing. You just want
to have an inch or two past. I'll
probably cut some of this off, but I'd
rather have um too much than not enough.
Now, I will take off this piece over
here.
So, it's really not as big as it seems.
Okay,
there we go.
All right. So, I'm just going to cut
pieces like this. You could even So,
since I'm doubling up, you could put the
velvet on one side and felt on the other
if you want to conserve
your velvet.
This stuff can be a little bit pricey,
but you're usually going to just use
little pieces of it.
It is better to cut a little bit more
than you need just because
you can't really patch this together,
but you can certainly trim it off.
So, that's kind of
why I tend to cut a little bit over.
But I just eyeball it. It is not a huge
deal.
The important thing is is that you cover
it. So, I like to use a glue gun that
has a temperature
little gauge on it because that way I
won't burn myself. So, this one I have
set down to pretty low.
I usually put it under this little mat
so that it won't get all over my mat
that I use every day.
Okay. So, it's hot.
So, we can kind of get started here.
So, I'll start with
the batting.
I'm just going to kind of go around
run some glue here.
Okay,
this stretches, so it's pretty easy just
to get it on there.
You can see why I like it. It smooths
out those edges. I don't have to go
around and try to
smooth everything out or anything like
that.
So now because I have this glue on low
heat, it dries fast. So
just go back and
get some more on there.
And now this part really won't be seen,
so don't worry about how it looks too
much.
Okay?
But you can see
except that little spot. See how nice
and smooth that looks? That's very nice.
Okay,
I'll trim off any excess.
I don't need
there.
If I see any spots I need to fix, I'll
just go ahead and do that.
But I'd rather work with the low
temperature than not burn myself.
Okay. Now, see how nice that looks? See,
that's all nice and smooth.
Okay.
Okay, before I go on, I just want to
show you. So, this side has the nice
smooth. This is a little bit kind of
off. So, I want this to be my front.
Trim that a tiny bit.
So, sometimes when you're working with
this, some of the little styrofoam can
come out. Just pick the side that looks
best and make that the front.
Okay. So, now
I want to pick
which two to put together and which ones
are going to be the front. So, these two
look good together.
And
these two look good together. This one I
could really use either one. I think I
like this side.
And I like
So, the next part is going to be
covering it with our fabric.
So, the reason you want to know which
side you want to be front and which side
you want to be back is we are going to
put a hanger through the back.
So, we're going to take our all and
we're going to go ahead and poke our
holes through because that's where our
pipe cleaner is going to go. So, the
same for this. It's also going to make
it easier for me to see which one is the
back.
Okay.
All right. Now, with the fabric,
I like to do
the parts that I know need the most work
first. So, this little edge part.
So, remember this is stretch fabric.
So, makes it a lot easier to do this. If
you're not using stretch fabric, the
trick is just to make little tiny cuts
in the fabric, but stop before you get
to where you're going to pull it up
because if you don't, then you're going
to have a problem.
You're going to be able to see. You
don't want to be able to see it. Okay,
there we go.
Okay. So, those are the parts that are
most important to me are these two
little areas.
Okay.
Now, we're going to have our little stem
there. Okay. So, once we stretch this
part on here,
then you can see it's going to look
really good. All right.
Now,
before I do the sides, okay, this is the
front. So, I want the front to have some
stuffing in it.
I'm going to tell you, I use an old
pillow because it has the same stuffing
in it. And quite frankly, it's a lot
cheaper.
So, you can get these at Walmart or
something. Just make sure it has the
polyfill in it. Then, I just kind of
stuff it in. I find it easier to do it
this way. Um, in the past I've done it
where I tried to put it in and then glue
it down. It just seems easier to me to
do it this way because then I can kind
of arrange it and get it in the areas I
want
and the thickness I want.
If you've ever made a pillow, then you
know that's kind of what you do, too.
Okay. You just kind of push it down
to get it
where you want it to go.
One of the tricks is to pull it apart so
that it's not all clumped together.
That's going to make it easier when you
get it in there.
Okay.
See
it there. All
right.
And I can just kind of
Now, there's a lot of ways you can do
this. You can
use your hand. You can use a tool.
I kind of like to use my hand because
then I could kind of move individual
pieces
and get it pretty much exactly like I
like.
That's good. Okay. I want just a little
bit up there.
This is why I like to use my hands.
Put a little bit into that little spot.
there. Oh, that looks cute. So, you can
kind of see it from the side.
Okay.
I'll kind of make sure I have
a good amount towards the edge.
There we go.
Okay.
Side just a little bit more.
There we go. Okay,
there. Okay,
just kind of stuff it back in there.
I'm going do
this side here.
And we're going to get these edges, but
we're going to do those last.
Okay,
just kind of
stuff that. Whoops.
Looks like I didn't glue it down good.
[Music]
Oh, I see why
my stuffing got in the way.
So, make sure that it is hitting
something that it'll glue to.
Okay, let's see. Yeah, that's good.
Okay.
And you do want to kind of pull it taut
there.
[Music]
There. That's good. Okay. So, in the
back I'm not going to put the stuffing.
So, that's why putting the stuffing in
the front is important.
So, get some glue in this corner. I'm
just going to pull it
like that. So, you see how I kind of
pull it so that it's riged right here.
Now, I'm doing that because it's
stretch. If you have the nonstretch,
remember just to put some
little cuts.
Okay.
if it's stretch, it's pretty easy to
just stretch it around and get it
exactly like you like.
So, keep that in mind when you're buying
um
fabrics to make these kinds of things.
It's always going to be easier to use
the stretch ones
because you can pull to stretch out any
little lumps and bumps.
there. See how that's
nice and smooth?
Then if I see any places that are not
like I want,
I put some glue and
pull it further.
Okay. Just like that.
Okay. And then I'm going to get this
edge. I'm going to do this same thing to
the other one for the front.
There we go.
All right. So, you can see how nice and
smooth everything looks. Look at that.
That looks awesome. and then I can kind
of move any stuffing that I need to
there. All right. So, I'll go through
and trim all this off. I won't show you
doing the second one because it's
exactly the same.
Okay.
Okay.
There we go.
I glue down any pieces that didn't sit
very well.
It's not going to matter what it looks
like from the back because you're not
going to see it.
There we go.
There.
See, look how great that looks.
Okay, now
the back is much much easier. So, I'm
going to show you how to put one whole
one together and then I'll do the other
one off camera.
All right, look how cute that looks.
Okay, so for the back, all I'm going to
do
is
take my fabric
Let's get the one that has holes in it.
Okay, now I'm just going to glue it on
just like we did with the batting.
So, just pull it around, stretch it.
Okay.
This is why I love using the stretch
stuff. It's just so much easier.
There we go. So, you see how having the
batting makes it a lot smoother so you
don't have those rough edges.
like we do when you're just covering the
poster board
or foam board. I guess it's called foam
board.
There.
See?
Perfect. Okay. So, I'll trim off the
excess.
[Music]
there. Okay.
So, any little places I see, I'll go
ahead and fix
there. All right. Now, I'm going to go
ahead and put in
my pipe cleaner.
Okay.
[Music]
So, I'm just going to put it right
through there. If you have any trouble
getting through the fabric,
then just use your little all
to make your hole.
There we go.
[Music]
Okay,
there we go.
Okay, I just twist it together like
that. And then I'm just going to attach
these two pieces together.
So, I'm going to get quite a lot of glue
on here. And you want to work fast
because remember this glue dries quick.
Okay.
Okay. Then generally what I do is I'll
take some of my clips and I will clip it
together
because I want to make sure
it's going to stay together until it's
glued.
Okay. Just like that. So, I'll leave
that for a little bit
and then I will show you what we're
going to do about this little side.
But I'll do the other one off camera. If
you don't want to do the foam, you can
just get some stiff felt and cut two
pieces and glue them together.
Or you can get green felt and cover it.
So, this is the stiff felt.
And let me just kind of show you how
that looks.
[Music]
So this will be a faster, quicker way.
But you can do it either way you want.
Okay.
And then you just cut it out.
The trick with felt
is to try to keep
your line as smooth as possible. So you
want to
use the whole scissor
like that.
So in other words, you don't want to
keep
having to open
and make a cut cuz that's what makes
those little
pieces.
So use the full length
of the scissors
so you don't have as many starting
points.
See there? It's very smooth.
Okay.
Okay.
Okay. So once you have your two pieces,
just going to glue them together.
Okay.
Then if I have any
edges or anything, I can just trim it
off. It's pretty easy to trim it. But
you want to trim it once you get both
pieces together.
so that you get that
smoothness.
Okay.
All I want is something that's thick
enough
to stand out as a leaf.
There we go. Actually kind of like this.
I think we might just use this.
Yeah. See, that's nice. It's nice and
smooth, but it's thick enough that it
would
fold together.
Now, to do the other leaf,
all you would do is cover it with a
little batting and put more of the
stretch type of velvet on it. But I do
think we're actually just going to use
this.
I want to use um these really thick
fuzzy
pipe cleaners. So, these are thick and
fuzzy. So, you see how cute that's going
to look. You just kind of put it on
there like that.
And then that's our stem. So, it's
thick, it's fuzzy, and it's got a nice
thick wire in it. So, it's going to make
a really great stem. Now, I have kind of
a light green and I have black. So,
we'll see what we're going to use when
we get closer to it. So, I'll go off and
do the rest of these. I'm just going to
do another leaf like this and a smaller
leaf and then the other cherry. And I'll
come back and we'll put it all together.
Okay. So, once everything is glued
together, now I've had this one clipped
for just a little bit. I want to show
you how to dissolve these edges. So, you
have a bunch of choices.
One is yarn. Yarn is a really good
option. So, all you do is just glue it
in
right in that little
area and it just covers everything up
and makes it look nice and neat.
You can also use
glitter rope. This is an another really
good option. This one's really cute cuz
it's all sparkly.
And then
another option
is some velvet ribbon.
This one is going to be a little more
subtle, so it'll cover it, but it won't
be as noticeable. So, and it's flat, so
it's not going to
curve in there, but it will still work
really well. Okay. So, I'm going to use
the glitter rope. This is always kind of
my favorite to use. It just fits in
there so well and it looks so cute.
Okay, so I'll just
put some glue on the glitter rope. And
you could do either side. You could do
the glitter rope or you could do the
cherry.
I think starting out it's a little bit
easier for me to put it on the glitter
rope and then I can kind of put it down
here.
there
like that. But see how cute that is? And
it gives it a little bit of sparkle.
Okay,
there we go.
So, I'm just going to go all the way
around.
You can see my hanger in the back.
This stuff is so handy.
Okay,
we go.
So, I am going to leave just a tiny
little space in between here because we
are going to put our little stem there.
But we can always trim it if we need to.
But look how cute. Okay. So, we're going
to do both of them just like that.
But you see how using the clips really
helps. I can make sure it's going to
stay together and it's not going to come
apart.
The other great thing about this using
the glitter is it'll hide any little
spots that you might have. You can also
kind of push them in.
And this glitter rope comes in a lot of
different colors.
I like to buy it in these rolls because
really it's a lot more economical
because you don't have to try to piece
it together.
It just makes it a lot easier.
Okay.
There we go. Okay. Look how cute these
look. See that? Got our little cherries.
Okay, so one of the last things I want
to do is I want to put some veins on
these leaves.
And I'm going to use puffy paint.
So with puffy paint, you want to kind of
hit it down like this and make sure that
it's coming out because you don't want a
bubble. is if you get a bubble, it it
just doesn't look very good. So, I'm
just gonna go straight up. It doesn't
matter if it's perfectly straight
because leaves are not. And then I'm
just going to make some veins
there.
Doesn't have to be perfect.
There we go. Okay. Okay. So, the puffy
paint does take a little while to dry.
So, we're going to let this dry before
we put it all together. See how cute
that is? Okay. You could also do it in
black. I kind of like it better in the
green just because
kind of looks a little bit more natural.
Let's see.
You just lightly squeeze on it because
it will come out pretty fast.
There we go.
And we're going to let these dry.
But this really does help with your
leaves to make them look like real
leaves.
There we go.
Remember, it doesn't have to be perfect.
It just needs to look like that. So,
It also doesn't have to have a ton of
them. You can just do a few
just to make it look
like there's veins on it.
There.
Okay.
So now we're going to let that dry and
then um when I come back we will go
ahead and Okay. So everything is dry.
This is dried. You can see the little
leaf.
I'm going to take
a couple of these
very fuzzy
pipe cleaners to make the stems. I want
to do black. Um, brown would work. You
can do green.
You can really do any color you want,
but I kind of want to do black.
Okay.
And so I'm gonna
make a tiny little hole here in the
center
just so I can kind of stick it down in
there.
Okay.
More glue in there.
All right,
we'll put that down in there.
There we go. Okay, there's the first
one.
So, kind of just
dent it first.
Just want to make sure I make it big
enough so that I can put it in there.
Okay,
go.
Okay,
now
it doesn't need to be this long. So, I
kind of want to figure out how I want to
put these. So you can put them together
like this.
Kind of
twist these together a little.
Okay. And then we're going to figure out
where we want to put our leaves. I think
I might want one leaf.
See? Do we want a bigger leaf? Maybe the
bigger leaf coming out right near
here.
Okay.
Press that in there. So, this is why we
did double and we did the stiffer
um
felt because this way it will stand up.
Okay.
there.
Okay.
Now, you can glue these two so together.
So, they are together or you can leave
them separate. I think I'm going to
leave them separate just because I want
to make sure that that's where I want
it.
I'm going to put
A leaf
right up here.
And then another one.
Maybe right here.
And then this I want to kind of
twist it and make a little
thing like that's kind of what a cherry
looks like. Okay, let's take a look at
it.
Oh my gosh, that is so cute. All right,
so we're going to be putting this in a
wreath. This turned out so adorable.
So now I have mine a little separated,
but you can see here's our ties in the
back.
Oh my gosh, how cute does that look?
Okay, so watch out for the video where
we put this in a wreath cuz that's going
to be a lot of fun. Thanks so much for
watching. Make sure to like and
subscribe and come back for more
content. And if there's something
specific you want to see, just let me
know. All right, bye y'all.
[Music]