The SIMPLEST way to start making BEER at home

Momma's Refreshments
442 followers
If you're curious about making beer, things just got a lot simpler.
Today I'm going to show you just how easy it can be to make this delicious hoppy citra ale.
Like many home brewers, I got my start making my own beer with a kit. But a lot of the beginner
brewer kits out there either try to dumb things down way too much or forget about some key aspects
that make beer actually taste good. I know my first few batches were straight dog dookie.
So I'm going to share some tips I've learned in the past 10 years fermenting and brewing
to help you make the best tasting beer possible in your first batch.
It all starts with the beer kit and I'm using the Clawhammer one gallon beer kit.
Clawhammer actually provided this kit for me and I gotta say it's one of the better
kits I've used. But I'll talk more about what makes it great in a minute.
Inside the kit comes a fermenter with an airlock, all the ingredients for a citra pale ale,
and cleaning and sanitizing products. Some things that you'll need beyond this are a stock pot,
you might actually already have one, but ideally a two gallon pot to give us some extra room to
work with. Another thing you'll want is a scale and a thermometer, hopefully you have those as
well in your kitchen. But if not I'll have some links in the description with some good affordable
options for all of these. The last thing I would recommend is a bottling kit. You can always save
bottles from beers that you've bought and then buy some caps and a cheap bottle capper online.
Or Clawhammer has a bottling kit as an optional accessory which is a nice convenient way to ensure
you have everything you need to package up this beer in the end. So with everything in hand it's
time to start making beer. There's many ways to make beer but probably the easiest way is to use
some form of malt extract in the main fermentable sugars. Malt extract is basically condensed wort
aka unfermented beer and can either come in liquid malt or dry malt form. But for both you really
just need to add water to make wort and while it is convenient by itself it's really not that
interesting. Thankfully this kit also uses some steeped grains to add complexity and depth to the
The start to any good recipe is with water. Water makes up 95% of beer so water choice is actually
quite important. My recommendation is to avoid tap water. It's simply too unpredictable to know
what's in your water unless you pull a water test or report. The mineral content in the water can
greatly impact its flavor, mouthfeel, and even the general fermentation health. You can technically
make good beer with tap water but you'll definitely want to add a camden tablet. This kit actually
comes with one and it'll help to wipe out the chloramines in the water that can leave your beer
with a plasticky almost band-aid flavor. No thanks. Something you don't want in beer. So what I
recommend you do instead is head to the grocery store and just buy some spring water. Its mineral
content is much lower and it'll give you the clean slate needed to make a clean tasting beer.
Start by heating up the water to 106 degrees Fahrenheit. Brewing beer can be messy especially
if you have a boil over. So I decided to brew this one outside on the burner of my grill but you can
totally do this in your kitchen. It's just much riskier and your significant other will thank you.
Trust me. Once the water is to temp, it's time to add the specialty grain bag. Inside this cloth bag
is some caramel 40 malt and what this will do is add a depth of sweetness, flavor, and a bit of
color to the finished beer. By steeping grains at warm temperatures, it helps extract those fermentable
sugars, flavors, and color to the water. Basically like making a big batch of tea and you'll see how
quickly it can happen. Typically we try and mash between a certain temperature range, usually
between 148 to 156 degrees Fahrenheit, and we'll leave the grains in the hot water for anywhere
from 30 to 60 minutes, maybe even longer. This gives it enough time to get all that goodness out.
For this recipe, we're just adding in the bag right when we get to 160, turn off the heat,
add the bag, and then add the lid to keep the temp stable. Then just let it steep for 30 minutes.
After 30 minutes, safely pull up the bag, helps to have some tongs or a spoon or something,
and now prepare to add the dry malt extract. Be warned, once the heat or water comes in contact
with the stuff, it gets very, very sticky. Even a little steam can make this dry malt clump up into a
mess. Another one of the reasons why we're outside. With the heat still off, slowly add it in and then
give it a stir. I have a big spoon, but any spoon will work. Even a whisk would work great. Give it
a really good mix to ensure it's fully dissolved. We don't want any clumps at the bottom that will
stick together and burn, giving your beer a nasty scorched flavor. It might take a few minutes to
get it fully dissolved, but once it is, it's time to turn back on the heat and bring to a boil.
This is where you need to keep a close eye on the pot. Now that we have the malt extract in there,
you're very likely to get a boil over if you're not careful. If you notice it's about to boil over,
kill the heat immediately. Or you can try this trick I learned, where you take some water in a
spray bottle and spritz the top as it rises. This should keep the foam in check, and after a few
minutes of careful watch, you'll hit the hot break, which is basically where the foam finally falls
down and it'll just boil normally. Now you can take a deep breath. With a rolling boil, it's time to
add the hops. Hop flavor, aroma, and bitterness contributions are greatly impacted on when you
add them to the boil. The longer you boil, the more bitterness you'll get. The less you boil them for,
the more aroma you might get out of them. So for every recipe, step one is to start a timer. We'll
boil for 60 minutes. So this recipe calls for a few additions, which will give this beer a more
complex hop presence, starting with the 60-minute addition of three grams of citra hops. This is
where a scale comes in handy to measure out the precise amounts needed. Just drop the hops in and
keep an eye on the boil. Sometimes it might foam up a bit with this first hop addition. Since these
hops are boiling for 60 minutes, they'll give us most of the bitterness, and it should really be
smelling like beer now. The next hop addition comes with 15 minutes left in the boil, eight
grams of citra hops. And then the last addition comes at the end of the boil. Turn off the heat
and add the remaining 18 grams of hops. This is typically called a flame-out addition, and since
we're not boiling these hops, we should preserve more of the delicate flavors and aromas. Now it's
time to chill, but our work's not done. What I mean is that we need to chill this wort down to yeast
pitching temps. The yeast that will convert the sugars in the wort into beer through fermentation
only work in a certain temperature range. If the wort is too hot, it'll likely just kill the yeast,
so we'll want to chill this down to below 70 degrees Fahrenheit. I found that the sweet spot
for most ales is around 67 degrees, and there's a few ways to chill it down. First is to just let
it sit with the lid on overnight, but that comes with the risk of infection from wild bacteria and
yeast if you're not careful. More on that in a sec. You could also try sticking it in the fridge for a
couple hours if you got the space, but the fastest way would be to make an ice bath in your sink
and set the pot in it. You should get down to the right range within an hour, if not less.
One important thing to know is that after the boil ends, the beer is susceptible to infections,
which can easily ruin your beer. I know from experience. Many of my early batches didn't
turn out great because I ignored this. So what this means is that nothing should touch your wort
unless it's been sanitized. Thankfully, this kit comes with these two vials. One is a cleaner, which
is a powerful product that can remove beer gunk from fermenters or kettles. We don't need to worry
about this right now, but it'll come in handy later. And the other is a sanitizer. When this sanitizer
is mixed with water, it creates a solution that is very acidic and will help kill wild bacteria or
yeast that might be living on a surface. One tip that I have is for you to mix it with some water
in a spray bottle. This makes spraying down and sanitizing surfaces really easy. Just give it a
spritz, wait a few seconds for it to work its magic, and then you can use it. Note that the sanitizer
only works well if the surface is already clean, but this spray bottle trick has made brewing a
lot easier for me. So back to the ice bath. Be careful not to let any water in. Putting the lid
on will help with that. Then just add more ice as it melts. You can help speed up the process by
stirring the wort occasionally with a sanitized spoon to disperse the cooler wort around. And
don't forget to sanitize your thermometer if you stick it in the wort. Once it's chilled down to
around 67 degrees Fahrenheit, it's time to add it to the fermenter. Assembling this fermenter was
pretty easy. You just need to add the spigot, which is one thing I really love about this
fermenter. A lot of beginner kits come with a glass carboy or buckets without spigots, which
means you'll need to auto siphon to get the beer out. And that can be pretty annoying and potentially
risky for your beer. So a spigot makes getting the beer out later a lot easier. With the fermenter
assembled, make sure to sanitize it first by adding water and the sanitizer together. You can do it
right in the fermenter and give it a good shake with the lid on. I even saved some of the sanitizer
from this into a bottle for later use. And then just dump it out. With it sanitized, you can now
add in the chilled wort. Since we boiled the beer for a while, we had some of the wort boil off,
reducing the volume. So at this point just top up with a little more water to the 1.25 gallon mark.
The added 0.25 gallons will give us some extra space since there'll likely be some trub left
behind at the end. Trub is just a bunch of proteins, hot matter, or even yeast that will fall
out of suspension to the bottom and take up space. And we don't want that in our final product, just
the good stuff. Now finally we can add the yeast. Sprinkle it on and close up the lid. Give it a good
shake, covering the hole with a sanitized hand or bung for about 60 seconds. Shaking aerates the wort,
which brings in oxygen to help the yeast perform. Oh bung you ask? These two parts are the bung and
airlock. The airlock fits into the bung and together it goes on top of the fermenter, creating
a tight seal. Fill up the airlock with some of that leftover sanitizer. If you've never seen
an airlock, it helps to keep things from getting into your beer. But since fermentation creates CO2,
it also gives it a way to escape so the fermenter doesn't explode under pressure. And with that,
brew day is done and beer is on its way. Not too bad, just a few steps to follow. Set the
fermenter in a cool dark place. Cool as in below 7 degrees Fahrenheit. You want to keep the
fermenter temperature somewhat in check, otherwise you might get some off flavors from hot, overstressed
yeast. And darkness is important because sunlight is the enemy of hops. If you ever tasted a skunked
beer, it's because the beer was exposed to the sun. And it's not really a good thing, unless you like
Heineken. Kidding! But just set it in a cold closet. The important thing for you to do now is just wait.
It can take about a week or more for the beer to fully ferment and resist the urge to open it up.
This can lead to all kinds of issues, one of them being oxidation. At the beginning of the
fermentation, we need oxygen to help the yeast perform. But once the fermentation is going and
through the rest of the process, we want to avoid oxygen exposure at all costs. This is where I
would say 90% of new brewers mess up. Okay, I totally made that stat out, but I'm guessing a
majority of new brewers don't really realize how badly this can mess up your beer. Oxidation leads
to stale flavors. Some even say a cardboard-like flavor. Or it can make your beer sickly sweet and
turn it a weird shade of purple. It's basically death to your beer, so just don't open it. Let
the yeast do the work. Wash the CI2 bubble out of the fermenter. In a week or so, you'll notice
that the bubbles will stop coming. That's how you know you're just about done. It's very important
not to rush fermentation. If you want, I'd say you can let this sit for about two weeks to be sure.
If you rush and your fermentation is not done, that can lead to bottle bombs later.
One piece of equipment that's not included in this kit is a tool to help precisely tell when
fermentation is done, and that's a hydrometer. They're fairly cheap, so if you think you'll
do this more than once, it might be worth picking one up. A hydrometer measures the density of a
liquid, or how much sugar is in it. By taking a sample of the wort before fermentation and then
another one at the end of fermentation, you can determine how much alcohol is in the beer as well.
The way it helps determine if your fermentation is done is by taking a reading a few days in a
If the reading is consistent, then you're likely done fermenting. If it changes,
then there's still a little more to go. But since this kit doesn't come with one,
that's why you'll see the instructions recommending giving it a full two weeks to ferment.
Either way, that day will finally come, and when it does, it's time to bottle it up.
This process involves filling up the bottles with a little extra sugar and then capping them. By
adding more sugar, we'll restart fermentation in the bottles, which will create more CO2,
which means pressure in the bottles and eventually bubbles when we open it up.
If you get the bottling kit from Climber, it really simplifies this for you by giving you a
set of bottles, caps, the crimper, and even some of these awesome priming sugar tablets
that are pre-portioned for the bottles. Before we fill them, we need to sanitize
the bottles and caps. If you got the spray bottle sanitizer, it will make quick work of this.
Or you can just fill up a bucket or your kettle with some sanitizer and dunk them all in.
Into each bottle, drop in four sugar tablets. It helps to remove the airlock so there's not
negative pressure on the fermenter. This kit also comes with a bottling wand and some tubing.
The bottling wand has a spring-loaded tip that when you press it into the bottle,
it allows the beer to flow through, and when you let go, it stops. This is helpful so you
don't make a mess in between bottles. But if you didn't have this, you could either just use a
piece of tubing and crimp it between the bottles or just fill it from the spigot, but that can lead
to oxidation, so probably best to just use a bottling wand. Plus, the bottling wand leaves
the perfect amount of headspace. You want about an inch or two of headspace from the top. It'll
help with consistent carbonation later. Whichever way you do it, make sure to have some towels around
because it can get messy. And once you get them all filled, add a cap on top and crimp it down.
This bottle capper has a magnet that helps with alignment. Just go slow and give even pressure
on both sides. You don't need to crank it down, just enough to make a tight seal. Test it by
moving around and then place the finished bottle into the box. Now that we're done with bottling,
it's a good idea to quickly talk about cleaning. You'll probably notice that your fermenter might
be a bit nasty looking. This is where that other bottle of cleaner comes in handy. What it is,
is a strong brewery wash that's specifically formulated to handle beer mess. So grab a good
sponge and mix it up with some hot water, and it'll make quick work of the tough, stuck-on stuff.
The more you brew, the more you'll realize that cleaning is actually kind of a big part of brewing.
But if you take care of it now rather than later, it'll be a lot easier since it won't be caked on.
Okay, enough of the boring stuff. Back to the bottles. Carbonation takes two full weeks to
reach its peak, which I know can seem like forever after all that work. And that's part of the reason
many brewers that continue in the hobby go on to kegging. It's faster to fill one keg versus many
bottles, and you can get to full carbonation in half the time. Sometimes even a few hours if you
do some tricks. I got a whole video on kegging if you ever get to that point, but for a beginner,
bottling is the way. That long wait makes it all worth it in the end.
And if you did everything right, you should end up with something like this.
I'm pretty happy with this little kit. It has everything you need to get started. And the beer
is a lot better than I remembered my first one being. Albeit, I have some experience now, but
hopefully I could share some bits of wisdom to help you on your first brew as well. I'll leave
a link to this Klautheimer kit in the description if you're interested in picking one up. And the
best part is you can take this kit and continue to brew and grow and expand to hopefully make
even better beer or other fun fermentations moving forward. And if you need ideas,
then I got the perfect video of the three easiest fermentations for any beginner to try.
Check it out. Cheers and happy brewing!
