How Christopher Nolan Shot the Iconic Inception Hallway Fight Scene...Without CGI

Christopher Nolan
157 followers
2 Video Views·Jul 11, 2025
"- And here we go."
Christopher Nolan's filmography is filled with stunning visuals.
And Inception is no exception.
Perhaps the most arresting series of shots are found in this sequence.
It's a scene that bends the laws of physics with almost zero CGI.
So how did Nolan and his crew make this dream a reality?
This is...
How They Shot It.
For more videos on filmmaking,
subscribe below
and don't forget to click the bell icon to receive notifications.
We'll be using StudioBinder's shot list
to dissect the shot specs Nolan opted for.
Christopher Nolan had a clear idea
of what he wanted the iconic hallway sequence to look like.
He used a detailed storyboard to outline his vision.
But this required three different sets to be built.
Two identical hallways were constructed.
One was stationary and vertical.
Used for the zero gravity shots.
The other was horizontal and could rotate.
Used for the shifting gravity shots.
The third set was a hotel room that could also rotate 360 degrees.
And it was used for both shifting
and zero gravity shots.
And Nolan had clear reference points for how it could be achieved.
"- And the idea of using a centrifuge to manipulate gravity
has been done on various films.
Most notably, Cubix 2001.
And I like the idea of repurposing that technology
and really do something that could be completely in-camera
in a way that I hadn't seen before."
The set was massive.
Comprising eight 30-foot wide steel rings
set 16 feet apart,
built in an airship hangar.
The 100-foot long hallway could be rotated 360 degrees
at speeds up to six revolutions per minute.
Then, when the fight spills into the hotel room,
they used a different rotating set.
Once the sets were built,
Nolan and his director of photography, Wally Pfister,
had to figure out how they wanted to place the camera in the scene.
In the vertical hallway,
the camera was placed on a telescopic tower cam rig
pointed straight up to help sell the illusion.
And in the rotating set, two camera rigs were used.
Depending on the specific shot,
the camera would either be on a techno crane
or it was mounted to a rail system
hidden in the grooves of the carpet.
Each camera placement had its own specific purpose.
"- The camera that was not mounted to the floor
is only up there for a moment
so you can start to feel the rotation in the hallway.
And then there's a camera mounted to the floor
that we dollied along."
Which both required intricate camera movement
as special effects supervisor, Chris Kobold, describes.
We programmed the camera to be at a certain point of the revolution
when the actors were in a certain position.
Because the entirety of the rotating hallway
would be seen on camera,
lighting had to be almost completely practical.
Meaning the lighting fixtures seen in the shot
were the main sources of light in the scene.
The lighting crew placed six 150-watt photo floods
into each ceiling lamp.
Other lighting included sconces.
And a soffit, which was fitted with nook lights
with 1,000-watt globes
diffused behind milk glass.
Once the technical aspects were ironed out,
the team still had to figure out
how to choreograph a groundbreaking fight scene.
Actor Joseph Gordon-Levitt did his own stunts
and spent weeks rehearsing the sequence.
"- What made that whole sequence?
But Joseph Gordon-Levitt, he spent over a month with us
rehearsing, exercising, doing physical gym work
to get certain parts of his body stronger
so he could deal with the stresses of the wire work
and the corridor spinning and stuff like that."
A large portion of the hallway fight
is played in a single take
to help sustain the illusion
as editor Lee Smith explains.
"- We did elect to play it in one shot
simply because our immediate response
when you first see the footage is
it just doesn't look possible."
Once in the hotel room,
the scene became even more dangerous for the actors.
The room was built on another rotating rig,
but its dimensions were much wider
making a potential misstep more serious.
The crew thus had to change the speed of the room's rotation
throughout the shot
so that the actors could keep up.
The other challenge was to simulate zero gravity.
Nolan and his team used two different methods.
In the vertical hallway set,
the actors could be suspended on wires
and appear as though they were floating through zero gravity.
The only real use of CGI in these scenes
was to paint out the wires
and fill in parts of the set.
The second method eliminated the need for wire work altogether.
Instead, the actors rode on a rolling counterweighted rig
similar to a camera dolly or child seesaw.
Nolan used the same technique in Interstellar.
This allowed the actors to be floated up and down
or side to side for more precise close-up shots.
A final touch used to simulate zero gravity was the costumes.
As designer Jeffrey Kurland explains,
you didn't want the gravity of reality
to give away the fact that this was all happening.
So I had to wire his shoelaces
so they stayed where they were supposed to stay.
The pants were slightly stiffened
so they didn't fall onto his ankle.
There's a lot of little things just to convince the audience
that this was actually happening.
Needless to say,
realizing Christopher Nolan's vision
was a massive undertaking for cast and crew alike.
But watching the final result,
it's hard to say it wasn't worth it.
What shot or scene do you want us to cover next?
Let us know in the comments.
Next time you're planning your own project,
be sure to use StudioBinder
to do everything from shot listing to scheduling.
Preparation makes dreams come true.
"- You mustn't be afraid to dream of a bigger dolly."
