Zisha Teapots with National Living Treasure Zhou Gui Zhen and Zhu Jian Long

Chinese Craft Traditions
9 followers
2 Video Views·Jul 10, 2025
This video offers a rare look into the world of Zisha (Yixing clay) teapots, featuring two masters of the craft—National Living Treasure Zhou Gui Zhen and Master Potter Zhu Jian Long.
Filmed in Yixing, China, the birthplace of Zisha pottery, the video explores the rich heritage, artistry, and precise techniques behind these highly prized teapots. Zhou Gui Zhen and Zhu Jian Long share their insights, craftsmanship, and passion for preserving this centuries-old tradition—where function meets beauty in every handmade piece.
This is an I Ching teapot demonstration by Zhou Guizhen. It's 2006 in Suzhou Long.
They'll be demonstrating their techniques based on traditional I Ching tools here.
The tools here made from buffalo horn, bamboo, wood, metal, all primarily made by the artist
himself. Zhou Guizhen will start out by making the bottoms and
tops to a few teapots. He's already prepared the clay.
He's going to cover the seeds.
I do the same.
He puts a form over it.
This is clay.
He holds the bottom of the teapot with a stick.
He presses it down into the bottom of the teapot.
This is a flatter teapot.
The reddish-red shape of the teapot is made by the hand.
The idea is from the hand's own feelings.
Yeah. I've never seen that.
Yes.
Like a ball.
It's actually moving, the clay.
I don't know how to do it.
I don't know how to do it.
It's not ideal.
I'm going to change it.
Like she said, we continue to use this to shape the t-pod.
The shoulder of the t-pod, like a people's woman's shoulder.
That's the shoulder part.
This part is the shoulder.
This part is the belly.
This part is the foot.
Yes, like this.
Like this.
Three mouths.
One big bun.
Two buns and three buns like this.
Eight mouths.
This part.
The mouth.
Like this.
The left side is the same as the right side.
It's the same.
Like this.
I made it this time.
Do it yourself.
Like this.
It's fine.
加到一块厚的泥片,再加到这一块,再用这个工具把它做成一个盖子,然后呢,就是这一块呢就是盖子,这个盖子呢,这个是盖子,这个是盖子,这个是盖子,这个是盖子,这个是盖子,这个是盖子。
稍微再加一点什么,就是一个盖子。
比如说,三个脚,这样放在那里,既然没有张脚之前呢,必须用这个东西,然后再继续做。
Put it on there, to cover it from the sun.
等我喝了。
很高兴高老师陪她看这个片子,她觉得对我们的印象挺特别好的。
医生一般做活,那个,看得到我们这些人。
对,保密这种。
不是保密。
它就是自然的,就是看不见。
因为都在家里了嘛,到了我们这个年龄。
她已经做的手法不是这样子。
况且呢,她也别不顾难了。
她不理解,就是。
就是一切素材,就是紫砂里面的最高峰。
一切素材,就是紫砂里面搞的最高峰嘛。
所以你去到其他地方就能看到了。
我们是顾井之一外的那个,比较就是正统的那种传统工艺的。
我回去找一本她的画纸给她。
看看有的话,请娃娃给她签个名字,蛮好用的。
她想要签名,她想要签个名字。
她是孩子的弟弟。
留下弟弟咯。
留下同志高。
大概能听懂你讲话。
大概能听懂。
她外公是一些人。
就是那个女的时候那种感觉吧,就是类型圆的那种感觉。
就是要像小孩子那种虚极的感觉,就比较可爱。
胖胖的那种。
直的也可以。
直的矮一点吧。
直的矮一点。
直的矮一点好看。
再稍微抽一点点。
胖嘟嘟的那种。
抽一点点。
一个是蝉鸣。
或者这个是鼻鸣。
从更早的接着就。
从蝉鸣吧。
更早的,更早。
乱讲。
乱讲乱讲。
她讲的陶瓷里面我都知道,她讲的那些人。
昨天她电脑里看见了。
做朴树也可爱。
最主要是取核来的。
对。
这个脊梁呢,将这个拔。
这样呢,把脊梁就烫掉了。
烫也掉了。
把子。
嘴。
把子。
嘴。
把子。
嘴。
切去一点。
这一条,这一个面。
就是这个弧的一段。
这个呢,下面呢,使一点点变化。
反弧。
这两个反弧。
这样的就是。
这个要改得好看,更容易。
变,变了。
It's not easy to control the shape of the mouth.
然后呢,我刚才讲了,他可以,我刚才跟他说,
有些人,他会希望可以,
其他人放几天,比如说,
他要一个月刚才做好。
表达很多,
嗯,做了一个月就做好了。
他呢,他基本上用一天三个月,
他就不再做这个加肩法了。
大部分他是为了造型而离开,
不断地修一修。
这个你就可以加肩。
This kind of clay you can add,
remove,
to shape you,
to do what you want.
主要是造型。
固定。
这个要曲线,
刚才我妈妈讲的那条五倍的曲线,
和他下面那个曲线,
还有就是他三接的那个牢固。
这个就是靠这个里面的一种感觉。
And this is to modify the shape of the profile buckle,
also feel more stable on the other,
to make it strong,
to stick to the man body.
一般人抱不起来还怕。
Strict attention to the details on the body,
and the appendages.
In these stills I'm going to show,
basically reiterate what she just did in the demonstration.
Making the wall,
smoothing out the slab for the wall,
cutting the wall with the double knife tool,
using a straight edge with the double knife tool,
and then rolling up the wall,
and cutting the template for the top of it,
that will hold it in the round,
applying it to it but not scoring or slipping,
so it does come off,
and fixing the seam
of the wall of the body.
And then paddling the form on the bottom of the piece,
which presently is now the top,
and working on the bottom first,
and getting the actual slab on the bottom,
paddling it into that shape,
and then smoothing out that area,
having added slip so it joins,
popping it off the template,
and then fixing the seam on the inside,
and then paddling the other direction,
and doing the same.
Once it's in enclosed form,
she uses a bamboo tool that she made herself,
to smooth and profile the shape further,
and then adds a coil to the top of the limb,
and works on the spouts and handles.
Carefully paying attention to the placement of the handle,
and the placement of the spout,
and then finalizing the piece,
by further adding clay.
And now, Soo Jong Long will show steps
that come after,
where she had left off.
She's cutting the lid out,
and preparing the interior of the teapot,
for a good fitting lid.
She's going to work on the foot of the teapot,
using I think a stone or a piece of plastic,
to polish and burnish that surface,
and hone up the shape of the area of the foot.
Using a piece of plastic,
smooth off the sharp right angle there,
and a piece of leather,
to polish it down further.
Just like Ms. Jo Gui Jen,
Mr. Soo Jong Long will take careful consideration
to the surface,
and pay close attention to every detail on this piece.
Now he is using a piece of buffalo horn,
that's been soaked in water,
to polish the handle,
and smooth off the surface of the handle.
Here he prepares to sign his piece,
or stamp it with a chop,
carefully centers his signature stamp,
has a nice piece of wood underneath it,
to stamp against.
Working on the interior strainer hole,
behind the spout,
with a bent tool,
he's cleaning those up,
and again paying attention to the interior of the piece,
as much as he would to the exterior.
Working where the flange meets up with the interior.
Here's some more shots of tools.
Further cleaning the interior of the teapot,
for a perfect signal.
And here Ms. Gao Ying Zi,
also a master teapot artist,
demonstrates the profile bamboo rib for the lid.
She talks about other tools,
and how the lid is made.
She's showing a hub mold made out of clay,
and a slump mold to rest it on,
while working on the flange.
Here's some examples of Ms. Gao Ying Zi's teapots,
in a damp pot,
and some handles and spouts.
So here Mr. John Long is further honing up the shape,
with an aged piece of wood,
which is somewhat moistened,
so it can burnish that part,
the interior of the body,
for the lid to fit.
And here he's checking the lid,
for how well it fits.
Checking the lid for its fit,
the surface gets burnished where it's too tight,
and he knows by the shiny area on that flange,
of the lid,
where to hone it up slightly more.
So using this metal tool that he made,
he is taking away very little amount of clay,
at a time, until he gets it to fit,
exactly the way he wants.
Together.
Now he's working on the knob for the lid,
which he first puts on,
and marks off an area,
and scores and slips that area,
and allows that to sit,
while he further manipulates the knob.
Carving out the interior slightly more,
and working in a vent hole,
that will transfer to the hole in the top of the lid,
so there's no vacuum inside the teapot,
and allows the teapot to pour.
Getting some slip ready,
and further working his linear structure,
on the outside of that knob.
The piece of bamboo is primarily what he seems to use,
mixed with plastic for this technique.
He's using a piece of plastic,
placing the knob on with slip,
and the piece has to sit for a while,
and he will clean up the slip that has squished out.
Here's a finished piece of his,
fired and everything,
showing a flat lid,
and not round,
so it's even more complicated.
Much more massive.
I hope you've enjoyed this video,
on this Zhou Guizhen, and Su Zhonglong.
You can find more on Zhou Guizhen,
and more on Su Zhonglong,
on my Flickr account,
under Clay Glaze Pots,
for still images of their work.
