How to make oak leaf from wood, wood carving

Eternal Sculptures
211 followers
2 Video Views·Jul 9, 2025
Hello everyone, in this video I will make a small craft in the form of a plate or a tray.
I will choose the middle so that I can save something here.
I cut out such an oak leaf with a jigsaw, the material is lipan, the thickness is about 18 mm.
I start by separating the leaf from the branch.
In this part, I will lower the branch down and then I will choose the middle of the leaf.
I will leave the drawing on Facebook and Instagram, VKontakte, who is interested.
And I'm going to work. Enjoy watching, friends.
From the front side, I cut out the branch, it remains to fix it from behind.
I will do it later.
I turn to the middle, I will do the selection, I will gradually deepen.
I also tightened the emphasis to support the leaf, otherwise it would be difficult to hold it in my hands.
As you can see, I went down here.
I want to give this leaf a little flexibility so that it looks more interesting.
What is it? I will make a serpentine on the outside, there will be upper and lower points.
For example, up, down, up, down, and so on in a circle.
I started to remove the sharp edge that was formed.
After this edge, I will do the back side, I will trim the back side so that the leaf is neat.
Such a nuance, I started to make a selection here, but I didn't like it.
So I bent the tip of the leaf a little and rounded it.
Now I will go with a 240 sponge and I will refine the detail.
As for the cutting, I would finish, it remains to apply the stain and varnish.
As for the color of the stain, I have not yet decided, but I am inclined to chestnut.
Also, I will not shoot it on camera, I will turn it on when I apply the varnish.
Of course, I will tell the children what color I used.
In the meantime, it looks like this.
Yes, as I said, I applied the chestnut color.
Shaded with sandpaper, made dark and light areas.
Well, in principle, this is how it turned out.
Not a difficult job, I did it quickly.
Even, I would say, a novice cutter can try to repeat, just practice.
Maybe it won't work out, but as I say, there is nothing complicated here.
Well, at least I think so.
Like it, you can also write in the comments which leaf I should cut.
It would be interesting to read what someone thinks.
Well, that's all. Good luck to everyone, see you in the next video.
