3 SIMPLE Editing Tricks I Wish I Knew Sooner

Photoshop Effects World
12 followers
#photoshop, #photoshoptutorial, #channelselection, #adobephotoshop, #photoshoptip #photoshoptutorials #photoshopeffects #photoshoplearning #DigitalTexture #DesignTutorial#CreativeEffects#TextureDesign#PhotoshopTextures#mockup
Do your photos end up lacking the wow factor,
even after you've edited them in Photoshop?
If so, there's three simple editing tricks
that will help you transform your photos
so you can take them from looking like this to this.
So in this video, I'll show you the simple trick
to bring any photo to life with just a few clicks,
the easy two-click method that unlocks adjustments
that pros use all the time,
and I'll break down how you can easily use
an advanced editing technique
that will leave you with the perfect
Have you ever been stuck editing an image,
just wishing that you could make it stand out and pop,
but no matter what you do,
there's only so far you can push it
before it looks overcooked
and underwhelming at the same time?
Well, one problem that a lot of photographers face
is that sometimes an image just doesn't have
enough color to begin with,
and you can't squeeze out something
that isn't there in the first place.
But there is some good news
because there's a super simple technique
that you can use to add and enhance colors
beyond what's originally in your image,
and the way that I'm showing you how to do it
means that it will still look as natural
as if the color was there all along.
So you can get creative with it if you want,
but to keep it natural,
follow the general rule that highlights in a landscape
tend to have warmer colors and shadows tend to be cooler.
So just keep that rule in mind
as you follow these next steps.
First, go to the Channels panel in Photoshop,
and if you don't see it here,
go to Window, Channels in the menu,
then on the keyboard, hold Command on a Mac
or Control on a PC,
and then click once with the mouse
on the RGB channel here at the top.
Then come back to the Layers panel,
add a new solid color layer,
choose any warmish color that you like here,
we can dial it in properly in just a second,
and then when done,
change the blend mode to Soft Light in this dropdown.
Now you can go back and double-click this color layer
to open up the picker again
and move the mouse around in this area
to just dial in that ideal color
that works best for your photo.
And you're probably gonna find
that even with the color you like,
it's a little bit too intense,
so what you can do then is reduce the opacity of this layer
to blend it in until it looks really, really good.
So what was that bit
that we did in the Channels panel anyway?
Well, that step is what made this color layer
only appear in the highlights of the image.
So look how bad it looks if I disable the layer mask
that is restricting it to just the highlights of the image.
So you can see how being able to inject warm colors
into the highlights can give your image an extra pop,
but imagine being able to make any other kind of edit
or adjustment that you can think of,
contrast, light, detail, anything at all,
and have it applied to just the highlights only.
For example, if the sky is too bright
and you wanna darken it without darkening anything else,
or if you wanna reduce the contrast in the shadows
without affecting the highlights,
well, this next editing technique
builds on what I've just shown you
so that you can do exactly this.
Let's say you're starting with this particular image
where the sky is way too bright,
and so you add a Curves adjustment to darken it,
but the whole image goes dark.
So let's undo that,
and instead, before you add the Curves adjustment,
simply Command or Control click on the RGB channel first,
and then add the Curves adjustment,
and now darken your image, and check it out.
It's darkening the brightest parts
without touching the darker parts.
If you wanna saturate the highlights,
you can do the same thing
and add a Hue Saturation adjustment layer,
and like I said, you can do this
with just about any adjustment that you like.
Pretty cool, right?
But this is only half of the trick,
because what if you want to adjust the shadows
and not the highlights?
Well, here's what's happening under the hood.
So it's the layer mask that's telling each adjustment
where it can and can't go.
So if it's telling this Curves adjustment
to go only in the highlights,
then to make it only go in the shadows,
we need the mask to do the opposite
to what it's currently doing.
To do that, you can simply click once
on the layer mask with the mouse,
and then hold Command or Control on the keyboard,
and press I to invert the mask.
And now, as if by magic,
it's affecting the shadows and not the highlights.
Now, this simple idea
of adjusting different tonal ranges separately
is one of the fundamental concepts
that every pro photographer uses to edit their photos.
But when I show you this next technique
that supercharges what I just showed you
and takes it to the next level,
you'll gain even more control
over your entire editing process
and be able to create amazing results.
Now, these techniques that I've shown you so far
are all based on light values in a photo,
but light isn't the only thing that we can do this for.
There's also a powerful new way to restrict adjustments
that I can't believe more people aren't using,
and so I'll show you that right after this.
Because first, the two tricks I've shown you,
they build upon each other,
and the same thing goes for number three.
So let me break it down into simple steps,
and then I'll show you how to use it
to guarantee perfect sunrise and sunset exposures.
So let's say you want to darken the highlights in the sky,
but when you use the earlier techniques,
the foreground also gets dark
because the foreground also has highlights in it.
What you need is a way to adjust the highlights,
but only the highlights in the sky.
So here it is.
And the best thing is that these steps
are only slightly different
to the last technique that I showed you.
The difference is this time
you'll add your adjustment layer first
and then make the change that you want to see in the sky,
ignoring what it looks like everywhere else in the image.
Next, you'll hide this entire adjustment
by inverting its layer mask.
Remember, click on it once
and then Command or Control I to invert the layer mask.
And then back in the Channels panel,
Command or Control click on the RGB channel,
which loads this selection of the highlights.
And you can think of this selection
like being a stencil that you're going to spray paint through
where it allows the paint
only to go in some areas and not others.
In this case, it's allowing it to go into the highlights.
So click back onto the layer mask of the adjustment
and take a large white brush on around 30% opacity
and then brush through that stencil into the sky,
revealing the darkening effect.
Pretty cool again, right?
And the thing is it gets even better
because these are the exact same steps
that you can follow to manually blend
two bracketed exposures,
which is something you'll often need to do
with high contrast sunrise and sunset photos.
The only difference is that instead of using it
on an adjustment, the darkening effect
comes from a second darker exposure
that you captured in camera.
Now, a quick side note,
if you want to use this on a photo
that you've already taken
and you didn't do bracketed exposures at the time,
you can try the next best thing
by duplicating your background layer
and then in the camera raw filter,
adjust the exposure up or down appropriately.
And then when you click okay,
you're gonna end up with kind of like
a faux bracketed exposure.
But either way, here's how you can do the actual blend
once you've got your dark and your light exposure.
For this process, you're gonna make sure
the dark one is on top
and then you're gonna add a layer mask to it.
Invert the layer mask by clicking on it once,
pressing Command or Control I
and then Command or Control click
back on the RGB channel in the channels panel
and then click on the layer mask once more.
Now you can brush through with your white brush
onto this layer mask
and you'll reveal the darker sky
to create an even blend
that is the perfect starting point
for the rest of your edits and adjustments.
And this is the fundamentals of a technique
called luminosity masking,
which is just a fancy way of saying
making changes to your image
based on how bright stuff already is.
But like I mentioned a minute ago,
what if there was a way to do the same thing
based on distance instead of brightness
so you could say brighten only the background
or make only the foreground darker?
Well, there is a way,
but for some reason Adobe have decided
to hide it away in a dark,
hard to reach corner of Photoshop for some weird reason.
If you wanna discover what this hidden technique is
and how you can use it
alongside what you've already learned in this video
to make your photos really pop,
then watch this next video.
