Kit trio de joaninhas 🐞 🐞 🐞 #diy #diycrafts #joaninha #decoracaocriativa

ARTESANATO TUDOPLANTA
53 followers
Jul 4, 2025
Are you ready to make another
ladybug that will cause trouble in your
garden? So here we go. I use a
400g jar as my
measuring base. I put three of these little pots
filled with chopped Styrofoam and a pot of
cement. I put half a pot of
mortar and use water to knead the entire
dough. I took a piece of
galvanized wire, made this bend and this
will be my little hook for hanging. You
can use a rounded pot
or it will be in the shape of
half a ball. Add dough until it is
completely filled. Tap lightly
until it is compact. This way there won't
be many deformities. When you
unmold it onto a surface covered with
plastic, you unmold it and leave it there
to dry. After 24 hours it
will be dry enough for you to make the
cavity behind the piece, so you can
attach those little hooks we
made. Sand your piece so that there
are no deformities that will get in the way when
you are modeling it.
This is how it has to stay. Now we're
going to put the hook in. On the
back you wet the little holes,
position the hooks and add
cement paste with mortar or it can be
pure cement with water. Make a cream and
fill that entire
hole. Once it's dry,
we'll start covering it. I made this
dough with grout so you can see that it can be
done too, okay? I put in
about a glass of water. I added
two spoons of white school glue. It
doesn't have to be one of those really expensive ones.
Any school glue will do, okay?
Mix well until dissolved.
Add the grout little by little,
stirring until you create a
homogeneous texture. Stir, stir, stir, stir, stir,
stir a lot until you get this
very malleable consistency, very easy to
work with. And then you paint
your ladybug there with all the delicacy in the
world. Guys, always brush in the same
direction to get the little lines on the
brush. This makes all the difference in your
piece. Also go over the bottom part
to finish it off and it
will look really beautiful. Once it's
dry, just sand it, okay? Leaving it ready
for painting. I'm going to use my little darling
that I love so much, which is the airbrush.
I explained it clearly so you could understand.
I love painting with it because it releases
a mist of paint. It looks a lot like
those sprays we use, right? The
paint I'm using,
I normally buy snow white paint and buy
pigments to give the colors. I buy
the primary pigments. That black paint
I used in the background is a
rubber floor paint that I've had for
1000 years. Pay close attention. The direction
of the hook is where you will draw the
ladybug's head, okay? That's why I
'm making these lines there so I
don't get lost. I'm doing all this
painting with a brush so you can see
how different it is, but you can also
do it with a brush, okay? Brushes are super
important and our favorite too.
Write to me in the comments what
color the ladybug kit
you are going to make will be. Tell me because
I really want to know. And also,
guys, when you make videos
from this profile, tag me, okay?
Please do this. I feel very
happy when you share, when
you do the things I put
here. This just drives me to create more
things. Thank you very much, okay? for all the
affection from each one of you. And it's time to
make the balls. Guys, you can do it
with an airbrush, but then it leaves a lot of fog
around. So, I preferred to do it with
cotton swabs, as I love making
cotton swab balls. With a very thin brush,
you make the ladybug's antenna, ok? Do it
on both sides, direct it well to be
well positioned.
Now we're going to make her eyes.
At the end of the antenna there, you make
two white balls with a cotton swab.
After this white color is
completely dry, then you add the
black dots, ok? At this point you
will direct the black dots to
where you want your ladybug to be
looking. It can be up, to the side, it
can be down. It's really cool that
we can put this diversity into
the directions. I drew the little mouth
there in white, you can make it
red too, it will look really
beautiful. You can also add eyebrows
, freckles, you use
your creativity, right? We
absolutely cannot forget to place the
light balls. This makes a huge difference
in craftsmanship, folks. It's shiny,
very lively, beautiful. After you
paint it exactly how you want, let it
dry thoroughly and then you resin it with
water-based resin or solvent. It's
up to each person. There you have it, we
have finished our most
beautiful ladybugs in the world. Guys, it was so
cute, right? I loved doing it so much.
I hope you enjoyed it too.
Thank you to those of you who are already
sharing and following the
profile here. This is all for you, for us.
A big kiss, may God bless
you all and see you soon. Oh, I forgot to
mention, these ladybugs ended up being
10 cm in circumference. Now, a
big kiss, may God bless
you all and see you next time. Goodbye. Bye.
