#aquariumplants#aquascaping#plantedtank Are you interested in setting up a DIY CO2 system for your planted aquarium? This complete guide will have you running CO2 in your planted tank for cheap (~$30 or less). There is no doubt that CO2 will increase growth rate, propagation, and overall health of nearly all aquarium plants.
Want to help support the channel? Consider purchasing some aquarium plants from my farm. All of the plants I sell are grown by me! https://aquariumplantlab.com
Another great way to help support the channel is by becoming a channel member for just $1 a month. As a small content creator, this small contribution helps pay for project supplies, video gear, and my time.
Amazon Affiliate links to products featured, or similar products (I earn a small commission from sales which help support the channel):
CO2 Diffuser (I use the large size in multiple tanks they work great!): https://amzn.to/3XcQyLW
What is going on everybody? In today's video,
I'm going to show you how I set up my DIY CO2 system for my planted aquarium.
It's incredibly simple, easy to do, and actually quite cheap.
So stick around. But first,
I wanted to mention guys that I do propagate and sell a lot of aquarium plants
and that's actually what I do for a living now and also have my YouTube channel.
So if you want to help support the channel and my small business,
consider purchasing some aquarium plants from my website.
I'll have a link in the description.
So what are you going to need for your DIY CO2 system?
Well, this is what I do. These are the components that I use.
And keep in mind that if you do some research,
you're bound to run by a million different ways that you can do this.
You can make it a lot more complicated,
but I like to keep things as simple as possible and this works extremely well
for me. So I'm sticking with it.
Some things you could do is have multiple bottles, link them together.
You can have an airline check valve here.
You can tweak the recipe for the CO2 generator as well.
But yeah, this is what I do and it works really well for me.
So let's go through each component here and what you're going to do with it.
First up, you're going to need some cheap granulated sugar.
This is the cheapest stuff that I can find. It's what I use for baking.
Same goes for yeast. This is the same stuff that I use for baking.
So this is what I use. Works great for me.
You will need a CO2 diffuser.
You could try to make your own. I tried that.
I would highly recommend not doing that. Just go ahead and buy one.
They're not that expensive. And this is, I mean, all said and done,
maximum you're going to be looking at about $30 for this entire setup,
including your diffuser.
So just go ahead and invest with a good quality diffuser.
It's going to work a lot better. You will need some airline tubing.
You're going to need some basic just silicone sealant,
like a hundred percent silicone. That's what this stuff is here.
I had a construction project already going at my house.
So I had this stuff on hand, the white stuff, and that's what I used,
but I'd go with clear if you could find it.
Keep the bottle cap from your bottle.
And I would recommend going with a one liter soda bottle.
This was actually a carbonated water bottle. I took off the label,
drank the water of course, and kept the cap.
You will need a one cup measuring cup, a funnel,
a drill bit that is just slightly smaller than the diameter of your airline
tubing and a drill.
You can get away with not using these things. You know,
if you wanted to use a knife and kind of get a hole drilled in
this that way, that would also work,
but that'll make your life a lot easier. I'd recommend it.
So take that drill that's slightly smaller than the diameter of your airline
tubing, drill a hole in the cap,
cut your airline tubing at an angle here, poke it through,
draw it through with pliers if you need to, or just use your fingers,
then use your a hundred percent silicone to make an airtight seal on the outside
of the cap here. Then connect that to your diffuser.
That's pretty much all you need to do other than mixing up your recipe.
And we'll go ahead and cover that now. Right?
So I've got one cup of sugar here and I've got my empty bottle.
Take your funnel, put that on the top here,
take your sugar and carefully, this is hard with a camera,
dump that stuff in here and fill up your bottle with one cup of sugar.
Okay, so we got one cup of sugar in our one liter soda bottle here.
Next up,
you're going to take your yeast and what I like to do is use about about a third
to a half of one of these packets. You can use a whole packet.
I've seen a lot of people recommend that,
but I think using less is just fine because after all,
yeast is going to grow exponentially as soon as you put it in here.
So you really don't need that much.
All you need to do is just seed this container with a bit of yeast and in time a
few hours it will produce a bunch of CO2. So don't necessarily,
you don't necessarily need to waste this stuff by putting in an entire packet.
You can get two or three bottles out of one of these packets.
And I've used this previously,
so this is about a third to maybe a half of a packet that's going in here.
Okay, so we got the yeast in on top of the sugar.
Now we need to activate this stuff. So you're going to fill this up to,
I like to do about two thirds of the container with warm water.
It should be like lukewarm.
You don't want it to be scalding hot cause you could kill the yeast.
But lukewarm is about where you want it, about one third full.
So let's do that. All right, so we're now we're about two thirds full.
Next thing you need to do is put your thumb over this and go ahead and shake
this thing really hard for about 30 seconds to a minute.
And that's really to activate the yeast. You want to get it totally saturated.
Otherwise you're going to have mass die off of yeast right off the bat.
So put your thumb over it, shake it for 30 seconds to a minute. Really hard.
Okay. Shaking complete. And you'll know you did it right.
If you have a little bit of foam on the top of the water here,
that will indicate to you that you got it nice and mixed up. So that's perfect.
Now all you need to do is go ahead and screw your cap back on the top of the
bottle here. So we'll do that.
Make sure it's nice and snug so that you don't have any CO2 escaping around the
top of the cap there. Okay. Nice and snug.
And then you're going to install this in your aquarium.
So I'm going to go ahead and put this in the tank.
It's going to take about probably two hours or so depending on temperature for
this to start producing gas.
One thing that I did want to mention though guys is with a single bottle set up
like this,
you want to leave quite a bit of a gap here because the process of yeast
consuming the sugar is going to create a little bit of waste and scum I guess on
the top of the surface here.
So you want to have a good amount of gap to the inlet part here because you don't
want that stuff to go into your line and make a mess in your tank.
That's what you need to do for a single bottle set up like this.
So don't fill it any higher than this. In fact, you can go a little lower.
Even about two thirds full seems to be about perfect for me. So yeah,
let's install this and we'll follow up here in a couple hours to show you the
CO2 production that this system will create. Okay guys,
so here we are almost two hours later, actually pretty much to the tee.
And as you can see, the CO2 here is absolutely cranking in the tank.
I also have a circulation pump here,
which is keeping this gas kind of suspended in the water,
which is good for better diffusion.
A couple of last things to note.
I had mentioned that you can add a check valve into the airline.
If you don't put a check valve in here,
what can happen is is while the pressure is building,
the water from the tank can actually start to go back into this line a little
bit. There's two things you can do.
You can either go ahead and just let that water slowly work its way out.
The gas will force it out over time.
Or what you can do is take that diffuser out and flip it upside down above your
tank. And within about three to five seconds or so,
all of that water will drip out of the diffuser and then you can just reinstall
it and it'll work like a charm. So that's one thing to note.
And then also another thing is that if you have a DIY CO2 system in place in
your tank, you obviously cannot turn it off with a solenoid at night.
So what that can do is lead to a lower oxygen levels in your aquarium at night
specifically because the plants are not photosynthesizing at night. In fact,
they'll be using up oxygen in the water and producing CO2.
What this can do is lead to essentially asphyxiation for your fish.
It could kill your fish.
So what you can do is you can also run a air stone in your aquarium at night
only and that will solve the issue.
But what I'm actually doing is not running one of those.
What I did is monitored my fish for a few days after installing this and I
noticed that the fish were doing just fine.
So I just avoided the air pump altogether.
So if you're going to skip the air pump,
just watch your fish for a while and make sure that they're not gasping or doing
anything in that regard and you should be just fine. Right guys,
there's actually one last thing that I wanted to mention.
The third and final thing is that this particular recipe for a DIY CO2 system
will last you for approximately two weeks and I say approximately because the
reactivity of a yeast in a sugar solution is going to depend on the temperature
and the ambient temperature of your room. If it's hotter,
it's going to last for a shorter amount of time because they're going to be more
productive and if it's cooler, it's going to last for a longer time.
So approximately two weeks is what you can expect from this recipe.
That's going to wrap it up for this video guys. I hope you found it helpful.
If you did,
go ahead and leave a thumbs up and drop a comment in the comment section below.
And as always guys,
I do sell aquarium plants to support this channel and my living.
So if you want to help support the channel,
consider purchasing some aquarium plants on my website.
That'd be super greatly appreciated. All right guys,
I'll catch you in the next one.