CAMPFIRE BREWING CHALLENGE — Make Beer Outdoors!

Momma's Refreshments
442 followers
The great outdoors. There's nothing like getting outside and enjoying the fresh air.
So today I'm stepping out of the house and bringing out my inner caveman by brewing a
beer outdoors while camping. I'm talking no electricity, no propane tanks, and no special
gear. Just a man, some fire, and the four basic beer ingredients. But this ain't a walk in the
park. You've got to be prepared. So I'll share all the tips I discovered to help you succeed
and brew your own beer in the wild. While the weather was a bit overcast this day,
I couldn't complain because my campsite had amazing views. A sprinkle of rain won't stop me.
Before anything, I needed fire. So luckily there was a break in the rain and I got a good fire
going. While that heats up, let's talk about some tips for success while brewing outside.
The number one tip that I can give is that prep is everything. You're in the wild so there's no
running out to a brew store for missing ingredients and you don't want to lug a bunch of extra gear
that you won't need. Pack light and prep all your ingredients ahead of time.
I'm just brewing a small one-gallon batch so I packed everything I need into this two-gallon pot.
Inside I have the brewing salts, the hops, and the yeast weighed out into individual containers.
I also added a thermometer to help track mash temps. Although I don't recommend this infrared
one that takes the surface temperature by shooting at it like a gun. It's not as precise around fire.
So a simple stick thermometer is better. And the last thing in the pot is a brew bag filled
with pre-ground grains. I weighed and ground the grains last night so I had less to worry
about and bring today. But an even easier option would be to just bring malt extract.
The last few things you'll need are water, which you'll likely be bringing some jugs anyways while
camping, so just grab an extra big one, heatproof gloves to handle the hot pot,
and something to stir with. I just keep this short mash spoon with my other camping cooking tools.
And then a fermenter of some kind. I'll talk a little bit more about this one from Kegland later.
You'll notice that I didn't bring any hydrometer or pH meter to take proper measurements. And that's
on purpose. I'm just trying to go dead simple and enjoy my time outside. I'll let the brew day go
as it wants to go and hope the calculations made by the brewing software get me close to my goal
beer. Oh and speaking of beer, I didn't mention what kind of style I'm brewing, but I figure
there's no better campfire beer than a rauk beer. If you're not familiar with this style of beer,
neither was I until recently. It's a smoked lager and it can be hard to find a good example,
but this one by Schlenker Law seems to be the gold standard. I always figured smoked beers would be
nasty, like drinking a beer out of an ashtray, but after trying this one I was shocked at how
good it was. And the smoke flavor wasn't overkill. It adds a, for the lack of a better word,
bacon-like taste and aroma to an otherwise crispy and refreshing malty lager. So I found this clone
recipe online and that's what I'm brewing here. It's basically 98% beechwood smoked malt and 2%
carafe 3 for some added color, but a little munich malt would go great in this. I'll leave all the
recipe details in the description if you're curious to try it out. With the fire burning
nice and strong, I added the water to the kettle and placed it over the fire. I highly recommend
utilizing the fire to grill up some tasty food for later. You'll be hungry by the end of the
brew day for sure. The goal was to get the water in the kettle up to around 150 degrees Fahrenheit,
or about 65 degrees C for the mash, or the steeping of the grains. Since my thermometer
isn't precise, I just used my best judgment. I added in the optional brewing salts,
followed by the brew bag, using my spoon to make sure it was well mixed and saturated. It then
became a game of moving the pot away and back onto the fire to keep the temp steady, which lord knows
I didn't do perfectly, but perfection is not the goal. Close enough is good enough for brewing
outside. After 45 minutes of mashing, adding firewood as needed, I pulled the grain back,
squeezing it out as much as possible, and then placing back on the lid of the pot and putting
it above direct fire. If you've ever complained about it taking a long time for something to come
to a boil, try using fire as your heat source. This baby got to a roaring boil in no time,
and I wasn't sure if it was the fire or the smoked malt, but this beer was smelling like
heaven. Once at a boil, I added my only hop addition, 0.6 ounces of Holotau middle fruit.
I let it boil for 30 minutes and then pulled the pot off the heat. By then the sun was setting,
so I enjoyed my dinner and let the pot chill out with the lid on overnight.
The next morning I woke up to the sound of ocean waves and soaring pelicans,
and best of all, a cooled pot of wort. Now you can ferment this in whatever fermenter you got,
even something as simple as a Home Depot bucket can work. I've made several fermenters like this
before, but I decided to ferment this beer in my newest piece of gear, this Oxbar Mono by Kegland,
who just so happens to be the sponsor of this video. And while I attempt to carefully transfer
the wort from the pot into the keg, let me tell you a bit more about Kegland and some of the gear
they sent me. Kegland is a homebrewing supply company out of Australia, and they make some
of the coolest and best homebrewing gear out there. If you've watched this channel before,
then you know I'm a huge fan of their Duo Type products and Raph Pill hydrometers.
This Oxbar Mono is their new 1-gallon PET keg that is lightweight, reusable, and one of the
most affordable options for at-home kegging. In addition to this keg, they also sent me their
new portable NukaTap mini beer faucet for taking beer on the go, which I'll show you just how
awesome it is in a minute. But I'm constantly blown away by the offerings and quality of products
that Kegland's pushing out, and I'm super proud to have them as a sponsor. I'll leave links to
the gear I'm using from Kegland, and if you're ever in need of some new brewing gear, be sure
to check them out. Plus they have an awesome YouTube channel if you want to keep up to date
on all their latest products. Thanks again to Kegland. With the beer safely in the keg,
I topped up with some water to replace any extra wort that got boiled off,
and then I added the yeast. I just ended up using Angel Yeast BF27, but something like a
Saff Lager 3470 or any equivalent lager yeast would be perfect. And since this is my serving keg
and my fermenter, you might get a bit of yeast sludge in the first pint or two, but eventually
it should pour clear. Once I was back at home, I added on a spunning valve and set it to about 12
psi. Kegland sell one of these too, and I might need to pick one up. These just keep the pressure
in check during fermentation to give you the cleanest final results. I then let it ferment for
a little less than two weeks, at which point I chilled it down and let it lager until my next
trip outdoors to try it out. Excuse me while I fill up from my cheg, my chair keg. So today I'm
not actually camping, but I'm at a cabin in Big Bear, so it's still giving me that woodsy outdoor
feel, and I thought it was a perfect way to show you how this whole system works and how you can
take beer on the go. This thing is actually awesome. This is the Nucatap Mini Vertical Clamp.
It's great for clamping on things like chairs, or they also sell a horizontal one, which is good
for like tabletops or picnic tables. And inside this keg, I have the Oxbar Mono, which I filled
up on camp day, and it's working out great. I got it with some ice going right into the Nucatap,
and behind me I got a CO2 tank, which just helped keeping the pressure on the keg so I could keep
pouring all day long. But if you didn't want to bring a CO2 tank, you can totally just use an
empty 2-liter bottle and one of these carb caps, and then just fill it up with a bunch of CO2.
And then just use that as your little portable CO2 tank. And as for the beer, it looks the part,
and it sure tastes the part. It turned out super smoky. I love the character that it brings to the
beer. It's got notes of char and smoked richness, almost tasting like something fresh off the grill.
To me, this is such a great summer beer because it reminds me of being around the campfire with
your friends. And what I really love is that even though it's dark and smoky, it still has a very
thin and crisp body, which makes it perfect. It's lager, it's smoky, there's something just
awesome about it. But it's definitely heavy on the smoke, so if smoke isn't your thing,
I would say you could always dial this back. I went full-on for the smoke because I wanted that
flavor, and to me this is almost exactly what I was looking for. Pretty dang good for my first
Roush beer. So if you've never brewed a beer outside, I say go out and give it a try. It's a
bit challenging, but it's also fun, and it gives you an excuse to get outside and enjoy the weather.
And if you've never even tried a smoked beer, I say definitely go out and try it first. And if you
like it, then maybe give this recipe a try, because I certainly know I was surprised how
good a Roush beer can be. Gotta fill up for my chag one more time. Cheers, and happy brewing.
