Knipex Surface Coatings Explained _ Which Is Best for You

The Tech Toolbox
1 follower
In this video, I break down the different surface coatings used on Knipex tools — from chrome plating to mirror polish — and explain how each one affects durability, corrosion resistance, and performance in different environments. Whether you're working in a cleanroom, outdoors, or on heavy-duty industrial tasks, this guide helps you choose the right finish for your needs.
#machine #tools #powertools
G'day.
Let's have a look at the different surface finishes
that NipX pliers come in.
So I've got five different ones here.
So I'll basically just go through what they are
and then the drawbacks and the benefits
of pros and cons on each,
because depending on your application,
you might wanna go for a specific surface finish
to make the most of the tool
and to get the most out of that tool.
So let's get straight into it.
Firstly, we'll start on the left here.
So you can see these, both of these,
we've got these electrician shears
and then we've got these nice super nips.
So that's just two examples that I've got here,
but let's obviously look at the surface finish of this.
So you can see how that super nice and shiny inox steel.
So that means it's a stainless steel.
Now the finish of this is simply polished.
There's no other surface treatment.
Obviously these are hardened,
but there's no other surface treatment to them.
So that is just a simple polish finish to them.
And likewise with these super nips.
Now the key feature is this is applied to stainless steel.
So obviously you've got no rust and corrosion worries
with stainless steel because inherently
it just will not rust.
So even if this is in wet environments
and you use it quite a lot with moisture,
you're not gonna have an issue with any rusting.
So the main reason for actually using stainless steel
and then not coating it is because this is ideal
for working in clean rooms and electronics.
So when you are working on small electronics
and you're cutting things,
you really don't want any of that metal
or the finish flaking off into those electronics.
Because if that happens, if the tool's damaged
or you've got a little crack or anything like that,
a little chunk of this will flake into the PCB
or the board you're working with, and it can short things.
Primary use of this surface finish
is when it comes to these electronics.
And then obviously other stainless steel tools,
they just don't need a surface finish
because they can maintain that hard blade
and keep a nice finish to them.
These two in the middle here are both attrimentized.
Just this one, you've got the gray color
and this one, you've got the black color here.
So this effectively is the same sort of surface treatment.
These are all dipped in a phosphate bath
at a very high temperature.
And then that metal of the plier
will actually react with the solution
and it will just form a microscopic crystal coating
on the surface of these actual pliers.
So the two different colors,
we've got the gray ones again and the black ones.
That just means it's just a slightly different solution
that's used.
So for the gray, you usually have an iron phosphate
and for the black, you have a manganese phosphate.
So slightly different.
The gray has a little bit less corrosion protection
and the black has slightly more corrosion protection.
So usually some heavier use tools,
they'll usually go with the black,
but you can usually find the tools in both of the coatings.
So it really will just come down to the personal preference
of what color you want when it comes to this.
So this is good for an average user.
If you're working in pretty normal environments,
even a bit of moisture environments, these will be fine.
These tools will resist rusting and corrosion pretty well,
but you do have to look after them.
So you do have to keep them clean.
You should be keeping them oiled as well.
So you can see, especially with these black ones as well,
you can see there's a little bit of residue,
oil residue on top and they are just a bit shinier
than this gray one here.
That's just because it got a little bit
extra oil applied to them.
So just for everyday use, DIY, any of that sort of stuff,
this coating will be completely fine for you.
And it's a little bit cheaper
than these other coatings here.
And as well, so I just want to show that as well.
What you can do is you can see this is coated
with that black coating on the side
and actually inside the jaw,
you've got that black coating there.
But then on the outside,
you can see it's actually been ground back and polished.
So the reason that's done is just to maintain
these nice tolerances and a nice clean finish to the tool.
And likewise with these cutting faces.
So we've got that gray color on the outside,
but then obviously in that cutting face on the inside,
that's just super nice and polished
and it doesn't have that surface finish there.
And again, that's just to maintain that tolerance.
Likewise with the cutting ones.
And then also with these tiny little Cobra XS pliers,
this is really neat.
They've got that nice black color to them.
So that just kind of looks really cool
for that surface finish to be there.
And again, you get that two-tone color
because usually there'll be a part of the jaws
that are ground back.
Likewise on these pliers wrench as well,
that side of the jaw is just ground back.
All right, so that's this finish.
Then we pretty much move to your, I guess, best finish.
And by best, I mean the best environmental resistant finish.
So this here is chrome plated.
NipX does chrome plating and zinc plating.
All of these ones here are chrome plated
because chrome plate is just slightly better,
stronger protection and a slightly more premium
kind of feel to them than the zinc.
So NipX does apply chrome to a lot of their tools,
but you can see quite a difference there.
So for example, these are both chrome finished,
but then this one here is just polished
just to give that slight different appearance
to the tool.
So this is nice and shiny
and you can see comparing them to these ones here.
So these are just both combination pliers.
You can see those jaws are coated all the way around.
So on the inside, as well as on the outside,
you've got that same coating on them.
Whereas again, on these attrimentized ones,
you've got that coating on the outside and on the inside,
but the side is just ground off a little bit.
So with the chrome coating or chrome plating of this,
it's gonna be all the way around the entire tool.
It is also a really hard material.
So the cutting jaws will also be coated in that.
And when you cut, that will obviously wear over time
and that's probably where you're gonna see
the most signs of wear and corrosion or rust,
but it does still have a really nice coating
all the way through.
So if you are working in wet environments
or you live in a humid environment
where there is a lot of humidity,
then you really should be going with
something like this chrome finish
because you really don't have to look after the chrome.
Obviously give it a quick wipe, keep it clean,
but that's it, it doesn't matter.
If there's moisture or residue that stays on this,
you don't have to oil it,
you don't have to polish it, nothing.
So that's a really nice finish,
especially with these pliers wrench here,
you can also see comparatively.
So personally, I reckon the gray one actually looks better
and I really liked that two tone.
So with that kind of polished up the top
or cut and polished,
but again, the protection for these is just less.
So if you are working again, plumbing,
wet environments where there's a lot of water
or moisture, marine environments,
especially corrosive,
or then again, clean rooms as well,
and you wanna have a cleaner tool,
then the chrome is what you go for.
And again, just have to point out
these nice excess or extra small pliers wrench.
These are just really cool.
And I just love how the whole thing is coated
in that really nice matte chrome.
I think that's pretty cool.
All right, so that's the main categories there.
And then they also do some galvanizing as well.
So these locking grip pliers are galvanized.
So that is also kind of similar to this plating, I guess,
but it is dipped in a zinc solution.
So basically that zinc coating
will just stick to the outside
and that is what you get that finish,
that galvanized finish for.
So that's just the matte look.
It is good for harsh environments.
It will withstand moisture environments.
So it also won't corrode.
So that's a pretty good finish,
but it's not as good as a full chrome coating to them.
So NipX just applies that finish
to some of these other tools
that will be in harsh environments,
but not used in water all the time.
So that's basically it when it comes
to their major categories of surface treatment.
The only other one that I actually didn't mention
is a powder coated.
So usually a lot of their pipe wrenches
will be powder coated
because powder coating will just withstand moisture
really well and chemical wear and tear.
So it's really ideal for heavy duty use.
So when it comes to pipe wrenches
and big heavy duty tools,
you can also get them in powder coated as well.
I just haven't got any of them.
I don't have a use for them.
But so that's it.
That's kind of the details
of the different surface finishes
and sort of the applications.
As you can see, I've got a big mixture of them.
Got a bunch of other tools here as well.
So at the end of the day,
it's really going to come down
to your personal preference
unless you have a specific environment
you are going to be working with.
If you're a plumber,
if you work with water, marine environment,
clean rooms, anything like that,
you want to go with the chrome coating
or that just polished stainless steel.
But if you're just using this
as an everyday contractor, DIY,
anything like that that you just use it
in a normal everyday environment,
your Atrematized tools are going to be completely fine.
You just want to, again, keep them clean,
make sure dirt doesn't build up on them,
give them a nice wipe and then oil them.
So any tool or machinist oil will be fine
just to keep that little barrier on the top
to keep the moisture away from them as well.
All right, so that's it.
I'll put links down to all of these tools below
so you can check them out
if you're interested in anything.
Again, keep in mind though
that pretty much all of these tools
do come in multiple different finishes as well.
So if you do want a specific finish,
then just obviously keep that in mind.
Now, go check out my other video
where I actually did a video
comparing all the Nipex handles that they do
because you can see there's quite a lot
of different handles that you can get these tools in.
And again, different handles have different uses.
So depending on what you're using this stuff for,
you want to go for the right handle.
So I'll link that video.
Make sure you check that out as well
because it is, again, really useful
and it'll just help you find the perfect tool for your need.
And those are the two things
you want to be watching out for.
So obviously once you've got a tool,
so say you want a pliers wrench,
then you want to figure out what surface finish you want
and what grips you want to actually have on that tool
so you can make the most of it
and it can be just the most useful for your application.
All right, awesome.
Thanks very much for watching.
Hit that subscribe and like button
so I can continue to make these videos.
Check out those links below if you're buying these tools.
Using those links does support the channel
and that's very much appreciated.
So as always, have a good one.
