How to run a UK 240V Motorhome on USA 110V Power ๐๐ก๐ฌ๐ง๐บ๐ฒ

Van and RV trips around the world
28 followers
Jun 24, 2025
Gary talks through the process of converting power from 110V to 240V. Hooking up with a UK 240V powered motorhome into a 110V USA campground.
Good morning and welcome back to our channel. Now today what I wanted to talk to you about
was the power hookups in the van. What we do in the UK as opposed to what we've had to do in the US
in order to make it work. So in the UK it's very simple. I've purchased this 25 meter hookup cable.
Now that bit there goes into a campsite plug and the end here just goes into the van. Very simple.
Now if I want to convert that and plug the van in on my driveway in the UK I then had to buy this
which is just a little pigtail. That goes into the campsite end and then that plugs into the house.
Very very simple. Now in the UK luckily for me my father-in-law Alan donated me this power
inverter and what that does that changes the 12 volt system in the van into a 240 volt system. So
we can use stuff that's on a normal 240 volts in the van without being plugged in
to a campground or the house. And that's been really really useful. Now coming over to the US
obviously the main difference in the US is that the US uses a 110 volt system. UK 240. So we
needed something to bridge that gap. So what I did was I purchased one of these which is a step-up
power inverter. And what that does is that takes the US 110 volt system and converts it into the
UK 240 volt system. So that attached to this means that we can then run the van on a 110 volt system
in the US and it converts it into 240 so we can use the van as we normally do. Now on a
pockup site in the US what you normally see is a post like this and they will have 30 amp or 50 amp
attachments or plugs. Now 30 and 50 amps are far too powerful to run the average UK motor
if you've shipped it across. So what you're looking for is 110 volts.
The 30 and 50 are for these big things that run 10 generators and and you know and five
air conditioning units. Now this here is the 30 or 50 amp plug. Now the 50 amp will tend to have
four ports in it the 30 amp or three. Now what we've got here kindly donated by the guy we're
staying with today is basically a converter that plugs in there and turns that into 110 volts
and we just plug into that and it runs the van and it's all perfect. Okay so I'm now going to
talk you through and show you the steps to hooking up. So this here is a 30 amp fuse or a 30 amp
plug-in socket. As I said before there would normally be another circular one there would be
50 and this here is the 110 but obviously this is this is taped up so we want that socket and
luckily the guy we're staying with here and we're going to buy one of these because it's really
useful has got this adapter here plugs into his 30 which turns that into a 110 plug socket that I
need. I then have my adapter which turns my English plug into a US plug I pop that into there and
that's now effectively my house in the UK. I then get my pigtail with the UK plug on it pop that in
there now remembering that's still 110 and I need 240 for the van which is where this
step-up converter comes in and I'll plug that into there like so leave that just take away from that
I then plug my 25 litre extension cable into one of the ports on here which is
like so and then I run that all the way into the van and I plug it into the van
a simple operation this end then goes into the van so this is my plug-in socket as you can see
it fits in there so I just pop that in there and I am now hooked up to 240 volts to the van.
