Review YSS G-Sport Smooth Honda Forza 250 ||| Andrea Varenz

Two-Wheeler Technology
5 followers
10 Video Views·Jun 24, 2025
Review YSS G-Sport Smooth Honda Forza 250 ||| Andrea Varenz
Good morning guys, we're here at Honda Forza Black, and this is the new grass.
Wow.
To be honest, this Forza is great. I really like the color.
Especially from the model, it's really beautiful.
Forza Black Mid.
And this is still new, a little spoiler.
The plate number is still white.
It's a little spoiler, so there's no plate number.
So it's safe.
We can't show the plate number, it's dangerous.
So, what is Forza doing here?
It's obvious.
They want to replace the shock breaker YSS G-Sport Smooth.
So, we're going to execute the replacement of the shock breaker.
And we're also going to install the shock breaker.
Okay.
Let's continue to the disassembly.
For the disassembly of this Forza shock breaker, it's not too complicated.
Because on the upper bolt, we don't have to disassemble the body.
So, for Forza, it's similar to XMAX, or ADV, or Aerox.
So, for the disassembly, you don't have to disassemble the body.
This is much safer.
So, this is YSS G-Sport Smooth.
Fonda Forza.
My tongue is almost...
It's slurping.
So, this is specifically made for Forza 250, with a height of 435.
So, we're still fitting the condition.
Still fitting.
And we're also going to replace the one on the right.
Because it's not funny to replace the one on the left, but not the one on the right.
This is the one on the right.
YSS G-Sport Smooth.
Fonda Forza 250.
The installation is 100% plug-and-play.
There are no clamps.
There is no disassembly of the body.
Everything can be installed directly.
Like this.
The installation duration is about 30 minutes.
More or less.
Now, we're going to set the YSS G-Sport Smooth first.
In this Fonda Forza.
According to the customer's request.
So, for me, the setting is based on the customer who is already in the workshop.
So, for me, I already know more or less.
But later, I need to adjust it again.
So, here we set it from the preload and rebound.
So, according to the customer.
That's why this setting usually requires knowledge too.
You have to understand first what the preload function is.
What is the function of the rebound.
Like this.
So, we're going to remove the lock from the preload first.
Then, we can install it directly.
Because I saw from this man.
He said it's about 90 to 95 kg.
So, we're going to try to lower it first.
About two turns.
More or less.
So, we're also going to set it.
The left and right must be the same.
So, we're going to continue with the installation first.
For the one on the right, the setting is the same as the one on the left.
I just lowered it earlier.
Only two preloads.
Then, for the rebound.
I usually set it from soft first.
I turn it soft full.
It's already solid.
I increase it by five clicks.
One, two, three, four, five.
So, the left and right.
I set the rebound earlier as plus five.
Now, we're going to try this setting first.
Here, we're going to test it on an uncomfortable road.
That is, there are a lot of sleeping bags and a hole in the road.
For the rebound, it's already okay with my setting.
So, this is also a coincidence.
The owner is not too different for the weight of the load with me.
I'm about 85 kg.
The owner is about 90-95 kg.
So, I set it more or less as I explained earlier.
Where for roads with sleeping bags and holes.
This shockbreaker can sink, but it doesn't make a hole.
Because I have to adjust the setting according to the condition of the road.
Indeed, sometimes everyone has a different feeling.
But the character of the road also affects.
So, the setting must be adjusted to each character.
For the road with puffing.
Here I have also tried.
And the bonus is also the road with holes.
Here, the shockbreaker is really okay to play.
So, for almost all fields.
It's enough for the YSSC Sports Mode in this Honda Forza.
Then also for the road with asphalt.
This is enough.
Where it doesn't make a hole.
Even though the condition is already soft.
So, this YSSC Sports Mode.
Want to be used for roads with asphalt.
Want to be used for roads with holes.
Or use roads with sleeping bags.
It's okay to use it.
The setting doesn't have to be complicated.
As long as you understand the function of the preload and rebound.
Here I set it to balance.
So, almost all fields can be used.
But if there is an excess load.
This must be set again.
Because if there is an additional box.
Or add items.
Especially there are passengers.
Automatically there is a change.
Here I set it temporarily for single render first.
Or it can also be used for...
Rider plus Bonzenger.
With the condition of the body weight.
Not too much.
Alias, not too fat.
So, more or less like that.
For the YSSC G-Sport Smooth Black Series.
For Honda Forza.
And my consumer has trusted this setting to me.
And I'm sure.
If I set it.
After installation in my workshop.
The majority of my consumers are satisfied.
Alias, like the result.
At most, there will be a discussion.
If it's not like this, not like that.
Or too much like this, too much like that.
It can still be discussed in my shop.
At the time of installation.
So guys, that's all I can share for this time.
Thank you for watching this video until it's finished.
See you in the next video.
Bye-bye.
