Struggling With Grease Fittings? Try This Simple Fix!
Proper equipment greasing is key to long equipment life. But a grease port may be almost impossible to access. LockNLube offers its LNL210 kit, which includes eight adapters to solve any greasing challenge. We’ll walk you through it!
#GreaseGun #LockNLube #EquipmentMaintenance #ZerkFittings #GreaseGunAdapters #GreasingTips #MechanicTools #AutoMaintenance #FarmEquipment #LNL210
Check out our Website, complete with blogs and more content! www.dirtfarmerjay.com
The LNL210 Kit from LockNLube features eight quick-connect adapters, allowing access to hard-to-reach grease fittings.
The kit includes:
Simple 90° Adapter—This unit features a smaller barrel size, allowing access into a smaller port above the Zerk fitting.
Push-On 90° Adapter: This adapter provides access to the fitting from the side when there is limited clearance above the top of the fitting, but the side is accessible. The opening on the side allows the adapter to be slid down on the fitting until it seats. Then, grease can be pumped in.
90° Grease Coupler Adapter - When there is some clearance above the fitting but it can’t be approached straight-on, this adapter works well and has a knurled adjustment ring to help grip the fitting.
Narrow Needle Regular - used to depress the ball in a Zerk fitting and inject grease - medium length.
Narrow Needle XL: This is used to depress the ball in a Zerk fitting and inject grease. It is longer to allow better reach to hard-to-reach fittings.
Grease Injector Needle - used to grease sealed bearings, the needle is sharp and narrow, allowing you to dispense grease into a sealed bearing without leaving a large hole in the boot.
Recessed (Cup) Extension—for hard-to-reach narrow spaces, the recess on the end of the extension matches the curvature of the top of the grease fitting. This allows you to approach the fitting from an angle and still get grease into it while pushing hard against it while pumping grease.
Seal-Off Adapter: This adapter applies grease where there is no grease fitting. Chainsaw tips sometimes have only an access port, and this adapter allows you to pump grease into the tip sprocket.
The kit has a ripstop case that can be rolled up and secured to keep the tools clean. Case grommets allow you to hang the kit and easily access the tools.
Each tool features a Zerk fitting on the back for easy connection and release from LockNLube (as well as traditional) grease couplers. The tools have a one-year warranty against all defects.
Like other LockNLube tools, these are well-made and offer good value for the kit price (at the time of our filming) of $75. You can receive free shipping by signing up for their email list.
We also reviewed LockNLube’s LNL153 heavy-duty pistol grip grease gun with hose swivel, 10,000 PSI grease coupler, 20” (51cm) hose, and storage nib to keep the hose controlled and give a place to hang the gun. Check it out here:
https://youtu.be/c9ezXEFJtb0
JUST DO IT YOURSELF!
Instagram: https://www.instagram.com/dirtfarmerj
Facebook: https://www.facebook.com/dirtfarmerjay