How Porcelain is made in Dehua, China

History culture hero
16 followers
5 Video Views·Jun 22, 2025
Hey guys, this is Shi Yuan, a ceramic artist traveling between China and US.
I'm here in Dehua today, a small town in Fujian province,
which located in the southern area of China. Dehua is known for its porcelain,
and I'm so curious to find out how the porcelain is made here. So let's go!
Dehua porcelain is more traditionally known in the west as Blanc de Chine,
and Dehua has been the ceramic exporting center since the early 18th century.
The special characteristic of Dehua porcelain is the very small amount of iron oxide in it.
It allows to be fired in an oxidation atmosphere to a warm white or pale ivory color.
As a ceramic artist, porcelain is my absolute favorite clay to use,
but I have never seen how porcelain is produced in those small factories.
Here we are at a small clay production site.
Wow, look at those machines. They look kind of ancient. Let's go to the other side.
Those are the kaolin, one of the key ingredients to make porcelain.
In the past, people found this material from the nearby mountains
and mined the local kaolin to make Dehua porcelain. But nowadays, many of the clay factories here
are importing kaolin from other places to reserve the local kaolin from over mining it.
There are several steps in the porcelain production here. The first step is processing
all the raw materials like the kaolin here under those pounding machines.
I would guess our ancestors were not doing much different in this part of the process.
With the repetitive pounding, all the chunks of kaolin are getting much more refined,
which will make the later steps easier.
Followed by mixing all the ingredients together with water in a big tank. A typical
composition of a porcelain is a mixture of kaolin, feldspar, and silica. Different
percentage of each ingredient will make the porcelain slightly different for various uses.
The mixing process can take pretty long. Then the mixture needs to go through various sieves
several times so that big particles will be left out. And then the ready-to-go porcelain slurry
will go into a ball mill for further refining. The drying process is a lot fun to watch.
They use a bat and felt system to primarily make the clay into a big porcelain pie
and hand it onto a squeeze machine. When the machine is filled up, they push a button so that
the pressure is gradually given from both sides to squeeze the water out.
After the pressure and the time reach to its setting, it will stop.
They take the porcelain pie out and pile it up. The evolution of the raw material transforming
into the douhua porcelain is almost done except one last step. To make the porcelain go through
a puck mill and back it up, they break down the semi-dry porcelain pie and throw it into the
puck mill. The purpose of using a puck mill is to de-air the porcelain and makes it easy to use.
It's actually very satisfying to watch the fresh porcelain comes out from the tube.
After watching the process here, I'm also curious about how the clay is made in the big factory
settings in the US. Let me know which part of the process interests you the most.
Okay, at this point, the douhua porcelain is ready to go out in the world. Hope you enjoy
watching this video. If you have any questions, leave me comments below.
Please subscribe my channel for more videos and thank you for your support.
