Prior to World War Two, the Soviet Union had a rather lackluster interest in antitank rifles - a series of guns were developed, but slowly and without all that much success. The Barbarossa invasion gave a very immediate need for just this sort of weapon, however, to give Soviet infantry units an organic anti-armor capability. Two star Soviet designers were tasked with designing AT rifles, Degtyarev and Simonov. The cartridge they were to use was the new 14.5x114mm, a high-velocity monster using a tungsten carbine cored projectile.
After a shockingly fast development period, the guns from both design bureaus were accepted. The Degtyarev became the PTRD-41, a single-shot auto-ejecting design that was extremely cheap and fast to produce. The Simonov design became the PTRS-41, a 5-shot semiauto offering more firepower but also taking longer to produce. The Degtyarev entered service first, with the first substantial deliveries of PTRS rifles arriving in 1942.
Both designs would serve through the war, with hundreds of thousands being made. Many were put into storage in 1945, and they are still seen today in Ukraine periodically. The PTRS would go on to be the basis for Simonov's 7.62x39mm infantry rifle, adopted as the SKS.
Hey guys, thanks for... hold on, thanks for tuning...
No, it's still not there. I think that's finally got it.
Thanks for tuning in to another video on ForgottenWeapons.com.
I'm Ian McCollum, if you can see me behind this incredibly monstrous firearm here.
And today I'm at the Royal Army Museum in Brussels, part of the Belgian War Heritage Institute,
taking a look at some of the particularly interesting firearms from their museum reference collection.
And today we have this monstrosity of a PTRS, a PTRS-41.
This is a Russian anti-tank rifle from the Second World War.
And people are probably going to be most familiar with it in the context of the SKS,
because this rifle was essentially the father of the SKS,
which is this thing scaled down by about 50% or more.
But let's talk for a moment about Soviet anti-tank rifles.
This was, of course, developed in 1941, but during the 1930s the Soviet Union, the Red Army,
was interested in having some sort of organic infantry anti-tank capability for the infantry squad.
They initially looked at recoilless rifles, deemed those unsafe,
which I can understand having been around a recoilless rifle that's firing.
Those things are pretty terrifying.
And then between 1936 and 1938 they developed and tested no fewer than
15 different prototype anti-tank rifles in different cartridges,
and none of them were deemed acceptable.
Ultimately the one that sort of went into production was called the Rukha Vishnikov in 1939.
It had problems, it was unreliable, it was very slow and expensive to produce,
and just really not a suitable solution to the problem.
Finally, they ... first adopted the actual cartridge that would be used in this rifle,
which was the B-32 cartridge.
This is 14.5x115mm, it is a huge cartridge.
Used a tungsten carbide core bullet for ... a very hard bullet core,
along with very high velocity to give it substantial armour penetration capability.
This would fire a 986 grain cartridge at a whopping 3,280 feet per second.
To put that in perspective, that's essentially the same muzzle velocity as a 20 inch barrelled M16A1,
but with a bullet that's about 18 or 19 times heavier.
Couple that with the tungsten carbide core,
and you got 40mm of armour penetration capacity at 300 metres range.
This was an exceptionally effective anti-tank rifle.
Now, even saying that, it was not effective on frontal armour of really any of the substantial
tanks of World War Two, but for much of the war it remained very capable of penetrating
the side or rear armour of a lot of vehicles, up to and including Panzer IVs.
There's of course a lot of, you know, everyone talks about the Panthers, and the Tigers,
and the King Tigers, but the vast majority of German tanks, especially in Russia,
were of the lighter variety. Early in the war they were Panzer Is and IIs,
and even through mid and late war it was Panzer IIIs and Panzer IVs,
and the vehicles based on those, StuGs and such, that were the majority of German armoured vehicles.
And those could be essentially disabled, effectively disabled, with rifles like the PTRS.
Now, I said at the beginning they had this Rukha Vishnikov that wasn't so great.
Well, there wasn't a ton of energy being put into the anti-tank rifle program because
the Soviet military hierarchy didn't really see a lot of practical use for anti-tank rifles before
World War Two actually started, or rather before the Germans invaded the Soviet Union.
Similarly, they didn't see a whole lot of use for the submachine guns. There were
a few submachine guns in Soviet service, but it really wasn't until the Winter War with the Finns
that they realized just how effective submachine guns could be, and started putting them into much
higher production priority. Same thing goes for anti-tank rifles. Stalin personally intervened
in military policy in July of 1941 to essentially dictate that anti-tank rifles would be built.
And in July of 41, they put two Soviet, you know, star Soviet designers onto this program of
we need an anti-tank rifle. And those guys were Siminov and Degtyarev. They would both develop
rifles that were tested by the end of August of 1941. So these are both extremely fast production
cycles, design cycles. And this was possible because Degtyarev designed a very, very simple
single-shot rifle. I actually have a video already on the PTRD-41. So if you're interested in the
Degtyarev design, you can check that video out. Siminov designed a much more complex rifle. This
is a self-loading five-shot magazine design, so a lot more going on. But he based the design,
the mechanism, on the AVS-38 rifles that ... had already been developed and ... had been in
production. And then of course the SKS would be the daughter of this design, and we'll take a look at
that in a moment. At any rate, after testing in August of 41, both rifles were actually adopted.
The Siminov, this one, was the more capable, you know, more effective rifle because self-loading,
five-round magazine, you could get ... had a lot more firepower to it. But the Degtyarev was a
much faster gun to produce and a much cheaper gun. And so while they both went into production,
in 1941 they only managed to build a grand total of 77 PTRS rifles compared to thousands of PTRDs.
1942, production of these guns finally really took off, and they produced some 60,
60-some thousand of them in 1942. For what it's worth they also produced 185,000 PTRDs.
The Red Army had a tremendous number of these anti-tank rifles. And of course in addition to
tanks they were also very effective on machine gun nests, light fortifications, various light
armoured vehicles, halftracks, that sort of thing. By 1943 every infantry regiment in the Red Army
was equipped with 54 anti-tank rifles of either Degtyarev or Siminov design. So they met that
goal of, we want organic anti-tank capability in the infantry squad. That was successfully
accomplished by 1943. So let's take a closer look and let me show you how this thing works,
because it's a lot simpler than you might expect. All right, I'm going to start by just pointing
this out right now. SKS, PTRS. As we take this guy apart I will show you the comparison to the SKS
parts, because it's almost eerie how similar the two are. These are really the exact same rifle,
just built to different scale. So basic operating system here. We have a magazine down in there,
just like the SKS. It holds five rounds, and the rounds came actually on an end block style of clip.
So you didn't have to actually strip the rounds out, you did put the entire clip
into the magazine. Unfortunately I don't have one of those to show you, but.
There is a latch here to release the magazine, just like on the SKS. There's our magazine spring,
and there is a bolt hold open that locks the bolt open after the last shot.
It is right there. Don't want to give yourself PTRS thumb, but I'll reach in, depress that,
and then I can close the bolt. We have a safety lever here, that's the fire position.
Bringing it all the way around there is in the safe position, where of course for a right-hander
it blocks access to the trigger guard so that you can tell even in the dark that the safety is
engaged. The rear sight is just a simple tangent leaf, graduated out to 1,500 metres.
Most of the time I would say 1,500 metres is ludicrously optimistic. In this case,
I'd kind of prefer to stay a big, rather long distance away from a German tank if I'm trying
to shoot at it. So we've got a nice big folding bipod on here. It locks in the open position,
you squeeze the legs together and you can fold it forward like that. And then to deploy it
you just pull down. There is no fixed lock to hold the bipod up. By the way, I normally try to set up
all my shots on video so that you just have the plain tablecloth in the background. That doesn't
work when the gun is 50% longer than the table, so you're going to see a bunch of background stuff
in these shots and I apologize. Up here we have the gas block. That's just the pin that allows
you to take out the gas piston. But yeah, taps gas off here just like an SKS. You can see there
are three little vent holes so that once the gas piston starts moving, excess gas is vented out
there. And then we've got our front sight here. You can see that this can be adjusted side to side
for windage. This is just the mounting pinned in place. And then a gigantic round cookie cutter
style of muzzle brake. There's the view from the front of the muzzle brake. You definitely want
something with this cartridge because you want to absorb the recoil as best you can. Before we start
disassembly, I want to take a moment to look up close at the fabrication on this. These parts
are crudely, crudely made. You can see these milling cuts. They're as much gouges as they are
milling marks. This was a forged receiver, obviously, and the absolute minimum amount of
time was spent final machining the forged parts. These were manufactured during an absolute
emergency for the Soviet Union. Literally, German invasion was in progress. And the more of these
they could produce, the more likely they would be able to stop that German invasion. And so
these were done with basically no care left for the outside aesthetic finish of the guns.
The quality of the machining cuts here on the outside really has no impact on how well the
gun's going to work. And so no time was wasted on those elements. Now the internal parts, the bolt
and the bolt carrier, that's a bit different. These have some discolouration on them from wear
and age, but these run smoothly and they have to be strong and safely built or else the gun's going
to basically explode in your face. And that doesn't do anyone any good. Alright, the first step of
disassembly, and the biggest difference between this and an SKS, is that the PTRS has a detachable
barrel. So I can push down this button to pull out this locking block, and then I can just pull
the receiver off the barrel. So we take that,
and there's the barrel, there's the receiver. Looking up at this end, this is our actual
short-stroke gas piston. So when the gun fires, that's going to come back and push the bolt carrier
back. The rest of this disassembly is made a heck of a lot easier by taking the barrel off. So our
next step, like an SKS, is going to be rotating this lever up. Now the SKS, this is a threaded
pin on here, it's just a keyed pin. But we pull that off,
and then we can take off the top cover and the two-part recoil spring with its central pin.
This particular gun is absolutely, completely filled with cosmoline.
We already wiped it out a bit, but there's still a ton in there. Now we can
bring the bolt carrier and the bolt. Here is a comparison of bolts, PTRS, SKS, extractors in the
same position. The basic geometry is exactly the same, and the same goes for the bolt carrier. You
can see we have the hooks here that are going to pull the bolt in and out of lock. We've got the
angled elevated surface here that pushes the bolt down. So the basic functioning of these guns is a
tilting bolt system where the bolt comes back, drops down like that, and then the bottom surface
here is locked. And the same thing for the PTRS, goes in like that, locks like that, and this
surface right here is the locking shoulder. They're both hammer fired, so we've got a firing pin here
on the back, there on the back. And if we look inside the gun, that's the hammer. Nothing's as
big as your thumb on the PTRS. And then of course there's the magazine. Top cover is also a slight
difference in that the PTRS has a guide rod in the top cover. The SKS, of course, has a captive
recoil spring, as opposed to the PTRS's non-captive spring. But you can see how mechanically these two
guns are essentially identical. And there we have the receiver internals. So locking shoulders are
here and here. We have bolt hold opens right there and right there. Hammers inside of the receiver.
You can see the disassembly pin captive here on the SKS, and it goes through that hole on the PTRS.
A couple of vital statistics I should throw out there. This has a 48-inch barrel. The whole gun
is 86.6 inches long. It weighs in at 45 pounds, approximately 21 kilos. It's a heavy gun. It's a
very awkward gun to carry around. This is really a two-person thing to carry, just because the weight
is just distributed over this incredibly long gun. That said, very effective. This is probably the
most practical and effective anti-tank rifle of World War II, and that explains why it was
in active use through the entire war. Unlike guns like the boys, like the German anti-tank rifles,
were actually rebuilt into grenade launching rifles, the Panzerbüchse 39s. They didn't even
bother to leave them. They didn't only stop using them as anti-tank rifles, they rebuilt them as
grenade launching rifles. The boys anti-tank rifle quickly became ineffective and was replaced by the
PIAT. The U.S. never even bothered to have an anti-tank rifle. Well, Soviets, with that 14.5
millimeter cartridge, had something that was truly, truly effective. Significantly more effective than
the 20 millimeter guns like the Lathi and Solothurn, because of its tungsten cord projectile design.
Again, I should point out, they did also have a hardened steel core variety. That was the B41
cartridge. Tungsten core was obviously the more effective of the two. Anyway, I've been wanting
to do a video on one of these for a long time. They're quite scarce in the U.S. and, well, pretty
scarce everywhere else too, for that matter. So, a big thanks to the Belgian Army Museum for giving
me the opportunity to break out this beast for you guys. If you're ever in Brussels, I would
highly advise taking some time to stop by the museum and check out their small arms displays.
Not only do they have cool firearms from World War I and World War II and beyond, but also
uniforms, artillery, vehicles, and all sorts of other cool stuff on display in a whole bunch of
different galleries. So, hopefully you guys enjoyed the video. Thanks for watching.