Making a Clay Pottery Bowl on the Wheel

Artistic ceramics
10 followers
1 Video View·Jun 18, 2025
Comments are disabled for this video.
Well I thought I was going to try and make a big bowl today.
It's not a big deal on my wheel to try and make something really wide because it's
the slowest speed. It's not really slow enough but we'll give it a go.
It's about six, a six pound lump this. We'll see how we get on.
I would like to have a go on a really slow wheel. Try and throw some really big stuff but
like I said my wheel's the slowest speed, really fast, a lot slower than most people so
anyway we'll give it a go. I'm going to throw a sort of cylinder first off.
I'm going to leave a bit of thickness to the base because I want a slight foot on it.
I'll squeeze it in at the bottom, get it a lot narrower.
Sort of cylinder and then wear it out on the inside outwards. Start slowing it down now.
As you can see that's the slowest my wheel gets so it's still pretty fast.
I'll try and just stretch it out now. I'll just form a little base at the bottom.
Try and just stretch it out. Steady as we go. It's quite grippy this clay so I'll just keep
wetting it down. Keep it quite thick at the top. Slowly stretching it out a bit at a time.
Just mop it out as we go along. It's a bit too fast to be making stuff bigger than this.
We're going to deal with it in really slow wheel.
Let's get it to be about my limit for the width because it's really flying around now.
Just try and make a nicer rim on it. I always want to just push it a bit more,
touch more, see if that's about it. If I start going any bigger,
that's about as big as I could do with a piece of clay that big anyway.
I'm going to start to try to make it any wider. It'll just be going too fast and just get out of
control. Final look, profile. If it's too big I'll just try it again, just flare it out a tiny bit
more and that'll do. So that's it, that's about as big as I can make a bowl on this wheel with
it being so quick. There we go, that's making a big bowl.
