The South Korean Daewoo K2 Rifle

Military Rifle History
1 follower
1 Video View·Jun 14, 2025
Firearms expert Jonathan explores the South Korean service rifle — the Daewoo K2.
Used by the Republic of Korea Armed Forces since 1984, this rifle combines features from both Western and Eastern designs.
Timestamps:
0:00 Intro
0:15 Daewoo K2 Overview
2:10 Firearm Features
7:20 Adjustable Gas Regulator
8:15 Firing Modes (was “Cow” — corrected to likely mean “Semi” or “Full-Auto”)
9:20 Magazine Release
10:54 More Features
11:30 Disassembly
17:50 Conclusions
Hi everyone, welcome back to What Is This Weapon?
I'm Jonathan and this is not a legally different video game M16.
This is the Daewoo K2, a South Korean service rifle.
What sparked this one is I was watching, catching up on Squid Game Season 2, and perhaps unsurprisingly
since it's made and set in South Korea, one of these showed up.
I was kind of hoping it was going to be in it a bit more, spoiler alert, it's not.
It is quite a brief couple of appearances of this thing among a load of sort of generic
AR-15 rifles, but I thought it was cool.
Went straight to IMFDB to see what else it had appeared in, and unsurprisingly, a fair
few other South Korean productions, Train to Busan, the movie, and Zombie Series and
a couple of other things.
It's logical, it's a standard service weapon, you know, you expect the SA80 to show up in
something set in Britain, depicting the military in some way, but not just South Korea.
This thing also, and I don't remember this, but I'm sure the internet doesn't lie, this
also shows up in at least one episode of the original ATV series as well, so that's interesting.
I'm guessing that's the first batch of imported semi-automatic variants.
That's what made me remember that this existed, and you will also find videos from Forgotten
Weapons, unsurprisingly, but also Nine Hole Reviews really putting the thing through its
paces on the shooting range outdoors as well.
So those are worth a look.
What we can offer you on top of that is, well, this is an actual, not, I guess, a South Korean
military service weapon, but it's exactly the same.
It's from the same production run as those, which means it has the full house.
The full position selector switch, but we'll come back to that in a moment.
So briefly, because this has been covered elsewhere, let's just run through the main
features.
So right at the end here, we have an original muzzle protector, I always think it's nice
when they come with those.
This is basically a brand new rifle, so we'll put that out of the way, and that lets you
see the flash suppressor there.
It is similar to the M16A2 style, it is closed on the bottom, as you can see.
It's slotted, and it is set up for launching rifle grenades as well, but it is longer,
this portion here is longer than the standard A2 birdcage, so it isn't a standard component.
In fact, there are very few interchangeable components on this, between this and the M16.
It is, in a way, more AR-18, for reasons that will become apparent.
Not least, if we jump straight to the back, we have here, push down and fold, to fold
the buttstock.
This was an AR-15 gas tube based system, stoner system, direct impingement, whatever you want
to call it.
We wouldn't be able to do that, we'd have a buffer tube of a certain length sticking
out the back.
So, that's why it's veering more toward AR-18, and actually the disassembly system is a little
bit AR-18-y as well, but other than that, it's quite different to both.
And then to deploy it, you actually have to push down and flip.
If you try and rip it open, well, you'll be there for a while, and you might even damage
the weapon.
But nice and solid when it's deployed.
This and the AK-74M, or even the old skeletal version, very solid folding stock designs,
I think.
I guess the Gliel one's pretty good as well, but then this one, I find, is easy to operate
in both directions.
Some of them are easy to open, harder to close, training solves all of these issues.
Anyway, back up to the front, we do actually have, and this normally wears a hazard tag
for this reason, we have a tritium insert on the front sight protector, which is very
robust, very solid casting.
And then we have a fixed blade front sight within that.
While I'm talking about sights, let's talk about the other sights.
So we do have, this went in a bit of a different direction than the Colt M16A2 family.
It has the same type of lateral adjustment as the original M16, M16A1, AR-15, going right
back, which is adjustable by putting the nose of a bullet into this detent and rotating
it.
But they went in a different direction for the elevation adjustment, and it is actually
user adjustable.
Like the M16A2, unlike the A1 and the earlier variants, that's a, you turn a wheel sideways,
this one you turn a smaller wheel vertically, and that gives you your elevation change.
You can see it goes up incrementally, and this is marked on the side, so 2.5 with a
handy arrow.
This is quite a user-friendly design, I think.
There are arrows, two different arrows showing you what the correct default setting is.
So in this case, 2.5, so 250 metres, arrow points at that number, that's what your elevation
is at, raising or lowering the muzzle accordingly, or you do that to compensate for the sight
adjustment, standard sight stuff.
And then we rotate that, so that's 2.5, we rotate it to the 4 setting, to the 5 setting,
and then finally maximum range is 6, so 600 metres up the top, and then we rotate it back
around, and it drops back down.
And there's even a notch on the 2.5, so you've got a very visual, in fact even a tactile,
like if you're in low light, you could feel the notch, why you'd be adjusting your sights
in the dark.
I mean, in theory you would be, because the front sight semi-illuminates, because the
sight protector does.
You can see where your front sight is at any rate.
I'm not sure how effective these are as night sights, but nonetheless.
So that gives you that, that's what gives you that very long rear sight protector setup
there.
There's always a reason for a design, a visual change in design, from a design that something
is based on.
Obviously no carry handle, as on the ArmaLite, sorry, British use of the word ArmaLite there,
the AR-15, M16, M4 family.
While we're at it, while we're on sight, this is drilled and tapped for an optic rail.
I haven't seen the original 1980s vintage optic rail for this, but I imagine it was
some sort of proprietary system, see if we can dig that out and show it to you in post.
Later we get some Picatinny rail on top, but this is classic 1980s Cold War look.
So an interesting feature I think is the adjustable gas regulator, not unique by any means, but
this has quite a lot of settings.
So we are on our default position, very soldier friendly, big yellow arrows pointing at each
other means you're on normal, so you'll be able to crack on and use this as normal in
a normal environment, under normal use.
But it's not N for normal, it is essentially equivalent to M for medium.
And I think the easiest way to explain the rest of these is going to be to pop out the regulator.
We have the usual spring plunger and detent in the front there to get your settings right,
and the settings as normal correspond to, let me show you, so with zero uppermost, that's
just a zero, the hole is blocked so the system can't work, there's no hole, and then the
other options we have are small, medium, and large.
Now the large is for adverse conditions to allow more gas to flow through and overcome
any dirt, sand, anything like that that gets in the action and slows it down through friction.
But what's unusual about this I suppose is the small gas aperture, which is intended
according to the manual for cold climate operation, which is interesting.
So you have two unusual condition settings, and then you have the off setting for launching
rifle grenades, because as well as an M203 copy you can fit to this, this was designed
to be able to launch rifle grenades off the muzzle device.
And you need to turn off, you have to remember to turn off the gas before you do that.
Clearly we have our gas tube here above the barrel, old school heat shielded handguards
there, I don't think we need to take those off, you can check out Ian's video if you
want to see that.
But we will have a look inside, before we do we have a sort of semi-protected magazine
release here.
So a little bit of AR-15 history, started out slick sided, lots of complaints, including
from the British by the way, of the magazine button getting bumped and the magazine falling
out.
Now the partial fence on the AR-15 M16 isn't actually, as far as I can tell from any literature
it was never intended to shroud the magazine catch, it just extended back here to provide
a plunger for this pin, to stop it coming out, and soldiers therefore losing it.
So that partial fence on the AR-15 is literally just a detent housing.
Then they finally, well not finally, quite quickly actually, on the M16, or into the
XM16E1, switching to the M16A1, and the M16 for the US Air Force was updated as well,
they put a proper shroud around the catch.
South Korea's gone in the middle, so they've got this acting as the detent for the front
pivot pin, but then they've extended it, and I don't know why Colt didn't do this in 1964-ish,
because the Americans and the Brits, and probably others were complaining quite a bit about
the ease of bumping the magazine, in fact Colt offered the British a stronger magazine
catch spring as an interim solution, because they were looking at something that hadn't
yet become the shroud.
So, sorry, bit of a tangent there, but I think it's an interesting design decision to extend
it back here, because that can only really be as a way to help prevent bumping the catch,
and dropping out the magazine.
We've got a reciprocating cocking handle here, nothing you can do about that, but you're
firing it from the right shoulder, so no worries really about operation.
We have a slightly weird disassembly catch system here, where that's the use position,
that's the disassembly position, and it would be very easy to leave it in that position.
Admittedly, you're probably not going to bump this so hard that it pops open, but it's something
that struck me when I was handling it, as maybe not ideal.
Now we can then take out our recoil spring, and then we need to pop the cocking handle
out.
Now according to, I think there was a comment on Ian's video from an armourer, that is very
deliberately designed as a screwdriver blade.
There are a few screws, probably the main one would be the handguard, I guess, and very
gingerly, that's a pretty good fit for a screwdriver blade, so I'm inclined to say that chap was
indeed a South Korean armourer.
And then we can take out the bulk carrier, and the piston in one.
So this is the big departure.
We've got a very AR-15 M16 lower setup here, albeit without, it has a buffer but it doesn't
have a buffer tube, but then we have this, I mean arguably quite Kalashnikov looking
long stroke gas piston.
Unlike the Kalashnikov series, it is not fixed to the carrier.
So that piston comes off, and you've got that to clean, and then you've got your bulk carrier
to clean.
I don't know why I'm fixating on cleaning, but that's the main reason, you'd be taking
the thing apart as a soldier.
And we do have a pretty typical AR-15 bolt, except that, so it has the extractor similarly
set up, but the ejector is not a plunger built into the bolt face.
I don't know why they changed the view on that, whether they thought it was superior
or, I can't imagine it was cost saving, this is not necessarily a cheap rifle to make.
But it does have a blade ejector, like a Sten gun really, running in a channel, and therefore
it has to run in the bolt itself.
Where is that?
Well, you can quite plainly see it, but let's pop off the lower because I want to show you
the bits that you won't have seen elsewhere, unless you're in staff career.
There's that blade ejector, and it is spring loaded, so it gets out of the way when it
needs to get out of the way, and it pops up when it needs to ride in that channel.
The two together, the extractor hooking out, and the blade pushing on the other side of
the case head, sends that case spinning out in that characteristic fashion that video
games often get wrong.
But increasingly they're getting it right.
So, a much shorter bolt carrier than on the AR-15 family, same kind of cotter pin, firing
pin, retaining pin, but it has the trapezoidal notch there for the cocking handle.
Right, so really, I think the main event as far as stuff you won't have seen before, hopefully,
on the lower receiver we have our four positions.
So, we start off, logically enough, there.
Obviously, again, this is all going to be in Korean characters, so not an export variant
per se, that just blocks the trigger mechanism from firing, of course.
And then the first firing position, so this is so far so AR, as it were, that then takes
you to semi, which will release the hammer when you pull the trigger as per normal, and
then automatic, which of course functions as automatic, always does, we've got a safety
auto sear here so that the bolt, the hammer doesn't follow the bolt forward.
And then where it gets, well, sort of interesting but sort of not at the same time, is the bottom
setting which is burst, so with the selector knob uppermost and the arrow pointing at the
setting, i.e. burst, at that point it functions, well, three round bursts.
So, pull the trigger, the hammer goes forward, bolt comes back under recoil, under the gas
system recoil, operation of the gas system, comes back, is then held by the auto sear,
comes forward for another shot, back again, forward for another shot, back again, at which
point it doesn't come forward again.
So even though the auto sear is activated, the hammer can't fall even though I'm pulling
the trigger, because it's counted off three rounds.
Now this is not some amazing breakthrough, this works essentially almost exactly the
same as the M16A2 or the M4 burst mechanism.
In other words, if I, I don't need to simulate it, but if I let off the trigger after one
or two shots, I then get one or two shots on my next burst, and my next burst won't
be three rounds necessarily, so really that's a training issue of if you're going to fire
a burst, you're probably going to want to hold the trigger until all three shots have
fired.
It has a counter wheel in there, we'll get in there and show you, it's on the opposite
side of the hammer to an AR, but it really does work the same way, other than the auto
sear being up here and not at the back.
I guess the gold standard of three round burst systems, or burst systems generally, unless
we count the AN-94, is the H&K system.
Very complex, but it allows you to at any point release the trigger, and it will reset
the clockwork back to three rounds, and you'll always get three rounds every time you pull
the trigger.
And finally I guess, we have a rubber butt pad there, it might be overkill for 5.56,
but we have in the pistol grip there quite a neat, well secure, a bit too secure actually,
so quite a strong spring there, and then we pop out a little cleaning kit, so there are
two little bottles in there, the smaller of which has a brush.
So a cleaning kit in the pistol grip rather than in the butt trap, as would be typical
of an M16 of this era.
That's the K2, it's the only variant, we do have a couple of these, but it's the only
variant that we have, the other major variant being the K1, now in a way that I think is
a little bit backwards compared to how things are normally designated, the K2 is the full
length infantry rifle, and the K1 is the short barrelled carbine version, now that did away
with the folding solid stock, and went for a telescoping twin strut buttstock, and then
into I think the early 2000s, the K2C carbine came out, which was the carbine version of
the K2 rifle, so they kind of set aside the architecture of the K1 with the sliding stock,
and they just shortened the service rifle into a carbine version, and they went with
an M4 style sliding stock, which I'm never a fan of, I always like original designs on
rifles, and then that got lengthened back out into the K2C1, which is back to being
a full length rifle, all quite confusing, but we only have the one to worry about. So
I believe manufacture and initial sales of these were started in 1983, and that's when
the Nigerian government bought their first batch, and another batch in 2006, and they
purchased a total of 33,000 of these, so not just South Korea, we know of at least one
other country that purchased, that's a significant purchase. Now part of the reason I mention
the Nigerian purchase, apart from the fact that Armament Research Services, who I've worked with,
picked up that and published that online a while back, so I know about it, also in fact the reason
it came up is that some of those ended up in the hands of the Avengers, not those Avengers,
needless to say, so this is a Niger Delta militia group called the Avengers. So as with all weapons
they can end up in the right hands, or the wrong hands, discuss. But it's never going to be a
world beater, it's coming too late in the day, the AR-15, M16 has already predominated, AR-18
for people to potentially look at, but that wasn't hugely successful as a military rifle either,
in fact really not at all successful, so a bit too late for the export market. But for a state
design and manufactured thing for your own armed forces, yep, works well as far as I can tell,
been in service since 1984 to the present with a few of these variants. So the K2C1 is modernised,
and the K2C as well, with a railed handguard, Picatinny rail on the upper receiver, so they're
keeping the thing relevant in a way that basically all armed forces around the world are trying to do.
But quite an interesting hybrid of approaches, a little bit of east and west
mashed together there, and I think quite a cool distinctive weapon. Thanks for watching guys,
don't forget to do the usual YouTube stuff, I know I don't always remember to say it, but liking,
sharing and subscribing as well, with YouTube being a little bit perplexing sometimes as to
what it does with videos with guns in, you will probably want to subscribe to make sure that you
get all of these. Check out our website, our social media accounts as well, and I'd just like
to give a shout out to the Lifco Small Arms Museum over in Australia, they are going through some
very tough times at the moment, they are closed, there were some thefts, and they need money to
bring their security up to standard, so head over to their website, link in the description to that,
or you can google Lifco Small Arms Museum, and please do what you can to help them out,
they are our counterpart collection down there in Australia, and we really want to
see them come back. But whatever you do, join us again here next week.
