Grow Your Own Mushrooms In a 5 Gallon Bucket (EASY)

Garden
5 followers
Did you know you could grow mushrooms in a bucket at home?
And not only that,
it's actually easier to grow those mushrooms than most plants you already know
about.
I'm Jacques from Epic Gardening and I've been growing mushrooms in my backyard
for just over four years now.
And today we are going to be meeting up with a true mushroom pro to talk about
how to take something as simple as straw and a bucket to produce our very own
mushroom factory. One that could be placed in a outdoor balcony, indoor space,
an outdoor garden,
and produce multiple rounds of mushrooms over just a matter of weeks.
Let's go meet up with Louis,
gather up our supplies and get this mushroom growth going.
I'm excited to be here, Jacques.
I'm wearing the right gear for the San Diego sun.
So Louis is visiting us from Maine where mushrooms can grow freely outside in
nature. And you know, in San Diego, they might, but it's a little drier here.
And that's why we are cultivating the mushrooms ourselves and we are using a
bucket.
So what's so great about the bucket over other ways of growing mushrooms?
The bucket is a fantastic tried and true way to grow mushrooms.
Nord Sport has been doing it for a long, long time.
The bucket is reliable.
It's fast. It's very high yielding. Okay. And it's easy.
I can't do four, but there's four right there.
That's four great reasons to grow it in a bucket.
I like everything about that and I believe this comes as a complete kit, right?
Yeah, that's right.
So in that kit you would get the exact amount of straw that you would need to
actually set up your bucket. And what is actually, we should mention,
what even is the straw? This is what I would call in my limited knowledge,
the substrate. Is that right? Yeah. This,
this straw is acting as our substrate and it's a really high quality,
clean straw.
You're not going to get a bunch of seeds growing out of this and it's nicely
chopped. So it has a lot of surface area.
And this is our carbon and our moisture reservoir. Okay.
So the mushrooms that we're going to introduce to this are basically going to
consume and live inside this.
And then these holes are actually where the mushrooms are going to come up out
of, right? That's exactly right. Awesome.
But we can't just grow mushrooms from straw in a bucket.
We need something else, which is bringing us to the block of spawn.
Is that the right term? Yep. And what is spawn?
Spawn is basically a colonized substrate, in this case, grain,
with the intention to inoculate something else.
So you can actually see it's all made out of like,
it looks like a whole grain bread where it's mostly the grain and less of the
bread. And the other thing I see here is all this white material,
which is the mycelium. And that is like the actual mushroom itself, right?
Yeah. That's the vegetative structure.
That's what's going to be in the log or underground.
It's going to be moving throughout this bucket and then the mushrooms form from
that. Awesome. So we've got our spawn, we've got our straw,
we've got our bucket, and we also have some burlap here.
So we're going to get into now how to set up this bucket properly,
because there is a little bit of stuff we have to go up front.
And the first thing we have to do is actually boil the straw.
There is this burlap bag here, and that is included with the kit.
The only thing you really need is this stock pot,
which I think is a minimum of what, like 16 quarts or something like that.
That's a good one to shoot for. 12 absolute minimum.
There you go. And this is actually a five gallon pot.
So we've got 20 quarts here.
So what I'm going to do now is I'm going to set up this burlap and we're going
to stuff it full of straw. And then we're going to add water.
Now, since we were starting with straw, which is already somewhat clean,
why do we need to boil it?
Well, even though it's pretty clean,
it's still got a lot of mold spores on here because there's mold spores in our
environment. Or even my hands, right? Like I might be introducing something.
It's all over us. Exactly.
And so we want to pasteurize it just to make sure it's really clean since we're
putting it in a bucket ultimately, and it's pretty closed in there.
There's going to be high moisture levels,
and that could be an environment that mold would love to grow. Okay.
But we want to give our oyster mushrooms the best chance possible. Yeah.
And so what we're doing here is we're increasing our odds dramatically of
getting a successful huge crop of mushrooms instead of just something that maybe
works, right? Yeah. And at the same time, we're hydrating our straw,
which we would need to do no matter what.
These oyster mushrooms are mostly water, like all mushrooms.
And so they need the substrate to have a lot of water too.
I've got all the straw in the burlap and it's in the pot.
So now I'm going to fill it with water. And what's our goal here?
Get that water all the way to the top.
And then we're going to bring the water to boiling and then bring it down to
just the simmer.
Our goal is to keep the straw in pasteurization range.
The upper end of that,
about 180 degrees and keep it that way for about an hour. All right.
It looks like we're just about there. If I push the straw down,
it's definitely a full pot.
So now I guess we fold this burlap over and something heavy to weigh it down
would be great. Like anything you have at home,
it could even be another pot of water.
In this case we found two bricks that we're going to use.
So I'm going to just keep this like that.
And that should be enough to keep it submerged.
There we go. That's going to be some golden water.
So what we're going to do, I'm going to turn this onto a boil.
And then once it boils,
drop it to a simmer and we'll leave it for an hour.
We'll come back and we'll talk about the next steps.
The pot has now been simmering for an hour.
We've got brown mysterious liquid, which I think means that we've succeeded.
It's sterile. It's been pasteurized at this point. So what do we do next?
So now we've got to pour off a little bit of this water,
let it cool enough so that we can pull the burlap bag out of there and let it
drain and cool.
It's now been about an hour,
maybe an hour and a half since we've been letting the straw dangle in the air.
And it is at least dry-ish. I tried to squeeze it. Nothing came out.
Feeling the edges. It's definitely cool. But in the center,
I forgot about how powerful of an insulator straw is.
It's a little bit warm, but not hot enough to burn my hands.
Now that we have the straw all cooled down, we could prep the buckets.
What do we need to do?
Our buckets are clean when you get them, but not clean enough.
You should still wash them out with soap and water.
And then before we actually add our spawn and our straw,
we'll just give it a wipe out with isopropyl alcohol as 70% as just another
safety measure to make sure it's extra, extra clean.
So what we're going to do is we'll get this open.
And then how do you like to actually get the isopropyl?
So we can just take a clean paper towel, take our iso,
get this nice and wet with the isopropyl and then start wiping down our surfaces.
So all we're doing here is every time you're cleaning,
you're reducing any chance of cross-contamination.
My understanding for mushrooms is that the number one issue that you'd ever
really run into is probably some sort of mold.
Yeah.
So doing something like this is just increasing even further your odds of
having zero issues with your growth. We've got that clean.
We've got our straw cooled. Now let's talk about the spawn.
Awesome. My favorite. So this is blue oyster,
pleurotus ostreatus or ostreatus, and this is a six pound bag.
We're going to open this up and break it up first. Now,
if you get this and you're not ready to use it right away,
it can be kept in the fridge for quite some time.
But it's going to work best fresh.
We send it to you nice and vigorous and freshly made.
The first step is to take off this tape there. You want to get that for me?
So just cut off this little tab of tape that's on the back here.
Not the bag itself, just the tape. Yes, just the tape.
And so now you can see a little filter patch that it's breathing through.
And we're just going to break this up gently.
You don't want to break the bag quite yet.
But this should be easy to break up and you want to break up all the chunks
because each one of those little grains is an inoculation point.
And so the better broken up they are,
the more it can spread its mycelium evenly throughout the substrate,
which is our straw. Okay. And so just to be clear,
this is a six pound bag of spawn.
This is basically enough to do two full buckets.
When you get a kit complete, it would come with a three pound bag.
So what we're going to do is we're going to just use half of this,
and then I'm going to set aside the other half to do a second bucket.
Even if you can't see the direct mycelium on the grain,
it almost certainly has some on there at this point. Oh my goodness. Yes.
But as you break it up, you can see that it kind of,
and it kind of disappears a little bit as you break it up. It's still there.
It's going to bounce right back.
So now we can cut this open and some people at this stage would even wipe this
down with some alcohol, wipe our hands down with some alcohol.
If we wanted, before we start dumping,
before we start filling the bucket, I don't know if you want a little bit of it.
I'll join you on this one. Yeah. I'm usually, uh, throwing caution to the wind.
Yeah. But let's increase our odds.
You totally don't need to do this step, but it's,
if you just wash your hands with soap and water, yeah. Good to go. Um,
so we can cut that open. Okay. And, um,
each layer of straw is going to be a few inches thick,
and then you're going to add about a half cup, um,
spread evenly over the top of that layer. And we're just going to go layers of
straw, layers of spawn, layers of straw, layers of spawn.
And we're going to end with straw. We got our spawn ready. We've got the straw.
So first thing I do is I take a handful of straw and add it to the bucket.
Correct. And then how much are we trying to get up to like one of the holes or
just a little layer?
Get a nice thick layer of another hearty handful, another hearty handful.
Ought to do it. Um,
just to really cover the bottom and have some thickness. One more would be fine.
Go ahead. One more. Do we do anything like, are we pushing it?
Are we just sprinkling it?
Make sure it's nice and broken up and distributed well and not super clumpy in
there. That'd be a really good idea.
And then I'm going to go and I'm going to get about a half cup,
but just a nice handful is fine. You can use a half cup measure.
That'd be great, but you can use your hands too.
That's the reason why I washed my hands and, uh, and, um,
got alcohol and I'm just going to sprinkle it evenly in there.
I love the smell of the spawn. I'm going to, yeah,
it's nice and sweet and just break up any of these larger chunks as you go.
Okay. So you really don't, you're not trying to get a chunk of mycelium,
really. You're trying to get little broken up pieces.
Yeah.
I want it as broken up as possible because each grain is where the mycelium can
spread from. And so you're just going to get better, um, distribution.
Okay. Now it's time for more straw. Time for more straw. Right.
So we're doing the same amount of layering or a little less now? Um,
about the same amount, but you'll see,
you think you're at the top and it compresses. Okay.
You're going to want to pack it down. Oh, I see.
So we'll do a little bit of packing at the end.
You want to make sure that there aren't big air pockets.
You want material that's dense enough for the mycelium to form
mushrooms. If there's not that density, if you have big air pockets,
it can't really form mushrooms. Well,
it can't kind of pull all the nutrients it needs together.
Just like if you're transplanting something,
you don't want to just pop it in a pop of the air.
We've got the bucket fully packed and ready to colonize.
And now we've got to talk about where to keep it.
The bucket loves anywhere that is humid and shady.
Okay. So no direct sun. I think I've got a couple of good ideas. All right,
Louie. So I have two basic ideas here on where to put this.
And the first one is deep in this artichoke patch.
Now the reason we put this artichoke patch here is that it is passively water.
So it's humid and it's also a North facing wall. So the sun never hits this.
That's a great spot. I am leaning towards this,
but there is one more that I think I like more. And it's right up here.
It's the loquat tree. Now, the reason why I like this is that a,
it looks great.
B it's got a great canopy to block the wind and it's got guaranteed shade.
So what do you think?
You know what? That's the spot. All right, let's go do that then.
It's spring in San Diego. It's not too hot or dry.
So I'm going to leave this as is.
And I should expect to see some sort of mushroom activity in two to three weeks,
right?
Yeah. I think temperatures are perfect. Um, within that third week, uh, you know,
give or take a few days, maybe just after three weeks,
you should be harvesting mushrooms.
Awesome. Well, thanks for coming down from Maine.
I know you got to go back home,
but I'll definitely let you know how this does and we'll check back.
We've got some mushrooms. We set this bucket up two weeks ago.
So now let's take a look inside and see how far along we are.
And here's what we have fully myceliated straw.
It's fully grown up to the very top of the bucket.
You can even see the imprint of the lid there.
So now that it's fully colonized,
we'll put this lid back on and should fruit really any day.
Now the moment has come.
The oysters are fruiting and they're looking really good.
Now it's been a little bit dry here in San Diego.
So what I did here is I have some burlap that I just soaked in water and I have
it draped over the top to give a little bit of extra humidity right here.
You could see there's some really beautiful,
nice clusters of blue oysters coming up and every single hole has started.
Some of them are a little bit slower, but they do have pins,
which are the baby mushrooms. So this is looking good.
We'll probably harvest in the next three days or so.
It's finally time to harvest all of the mushrooms from our bucket.
Now, last time we saw each other, the mushrooms had emerged.
Some of the clusters were almost ready.
They were actually harvested later that same day.
So you might notice that there are some missing patches of mushrooms here,
but also that same night I had to fly out of San Diego.
I was gone for four days and that time period,
some things definitely happened.
Nobody was around to actually miss this and while we didn't suffer any major
damage, these fruit clusters look totally wonderful.
They should be absolutely delicious.
Some of them simply dried out a teensy little bit.
What happens when mushrooms dry out is that the pins,
which are those first little baby mushrooms that emerge out of the bucket get
dry and they will actually be aborted.
This is when the mushroom itself knows that it cannot support those pins.
Either they got damaged due to dryness or something like that,
and they will no longer grow into true mushrooms.
So you might see like right here and right here.
I have a couple that started to form, but in the back here,
there are some of these little baby guys that just simply aren't going to make
it.
Now,
overall that did decrease our harvest by a pretty decent amount because one,
two,
three of the cluster sites basically failed to form a full mushroom.
Now this is my fault entirely.
I should have provided some sort of extra humidity protection.
And of course,
the same time I was gone was also a very hot dry week.
So live and learn,
but nothing is lost in the process.
We still have four beautiful cut clusters of mushrooms here.
We're going to harvest some more and this bucket should be able to fruit at
least another one to potentially three more times.
So now what we're going to do is cover how to harvest your mushrooms from this
bucket to ensure you get a second flush and how to set this up to actually
produce a robust second,
third,
and hopefully fourth flush of mushrooms.
At the end of this,
we'll also talk about what to do with all this myceliated straw,
because trust me,
you do not want to waste that.
So first I want to weigh the mushrooms that were already harvested.
These were kept in the fridge and they look a little bit bluer overall.
You could see some of the blue hues on the caps and that's simply because they
were harvested a day earlier.
Now I should have ideally harvested everything that's still coming out of this
bucket yesterday,
but I was in a plane and that was impossible.
So how much do we have in terms of weight already?
We should have 300 grams,
which is about 11 ounces.
So this puts us at just under three quarters of a pound of mushrooms so far.
So let's harvest out the rest of these and see where we land.
It is very tempting to take a knife like this mushroom knife here and just chop
them off.
That totally works.
You'll definitely get your mushrooms,
but let me explain why it's actually better to do something like this,
which is to just grab the mushroom itself,
the whole cluster,
and then you could either pull down or try to twist like this and you should be
able to pull it right out.
Now the reason why we're doing it exactly like this is that when we do that,
we actually are able to free this plug right here.
You don't want to leave a little chunk of mycelium or mushroom like a stem
because then that's going to block any future mushroom production.
So now that I know that I could see the straw there,
I know that this will be another successful site in the coming flush.
Now,
what about these ones that have some of these small pins due to those dry
conditions?
They are not going to form a mushroom at this point.
Once you have some mushrooms like this that are clearly mature and ready to
harvest,
the ones that are in the back here are just going to struggle and hang along.
And most likely do nothing in the end at all whatsoever.
So what you want to do in whenever you're harvesting your whole bucket is
harvest everything to completion,
including the tiny ones that look like they might have a chance.
Just go ahead and remove them and you'll have a better second flush overall.
So I'm going to go ahead and again,
pull on these plugs a little bit so we could get some of that pop out.
And if we do leave anything behind,
I'll go through and show you how to clean those out.
So here's an example of one of the plugs that needs to get cleaned out.
So right here,
this is actually all mushroom.
What we want to do is just take something like a knife.
You could use a screwdriver,
whatever you really have on hand.
And we're just going to come through and cut out any of this material.
Again,
we want to make sure that we get back down into just straw that is going to
ensure that we actually don't plug up this hole with an old mushroom block.
And instead,
fresh mycelium should be able to form now.
And from here,
we'll get another cluster of mushrooms.
And now before we set this up for its second flush,
I do want to know how many mushrooms we just harvested.
So I've got the scale zeroed out and let's see.
So now we're at a total of 13 ounces.
So if I go ahead and add all these back on,
we should be sitting at pound and a half on the dot one pound,
eight ounces.
So that's pretty dang good for the first flush,
especially considering that three of the holes basically didn't actually have a
chance.
And the beauty of this is that it's actually super simple to set this up.
Once again,
all we're going to do is take a hose with a missetting just like this.
I'm going to miss all sides of the bucket,
trying to hit the holes a little bit there.
And then we're going to get ourselves a plastic bag.
If you don't want to use a plastic bag,
you could also use something like a coffee burlap bag and just soak it really
well until it's fully hydrated. Now that we've missed it,
we're going to take the bucket, put it into our plastic bag, like so,
and then I'm going to tie this up. Once you place it in the bag,
just put it somewhere safe again,
that is in the shade and you'll leave it in this bag for about one week after
one week, take the bag off, set it back up.
And you should see pins forming in another week or so.
And you saw how fast this last one was another week after that,
you'll probably have your mushrooms ready to harvest.
So three to four weeks from the initial harvest,
we should get our second flush. And then we'll do all that again,
hope for the third flush.
And essentially we're going to keep trying until either it stops producing
mushrooms for sure.
Or we start to see contamination like some sort of green mold actually forming
on one of those sites that are drilled in the bucket.
And once you are fully done at that point, do not put this in the compost.
Actually you could put it in the compost. It'll break down,
create wonderful rich matter that you could spread across your garden.
But what I would suggest is that you actually break up the straw full of mycelium
and start spreading it into other mulched areas of your garden.
We've put it on top of straw mulch in raised beds before,
and we actually got another couple of little clusters of oyster mushrooms to
produce. So this isn't done when the bucket's done.
There's always potential for more life.
You could spread it through your garden.
You could even use it to start another mushroom bed.
It's really amazing how powerful the mycelium of the mushrooms are.
And if you're curious,
you don't want to really open the top unless you're just checking at the
beginning to see if it's been fully colonized.
We're not adding any water directly back into this bucket.
We want to keep it as sealed as we can. So there you have it.
How to grow mushrooms in buckets at home. No matter where you live,
you could definitely set up a bucket. Even if you don't have a garden,
you can do this indoors. A wide variety of mushrooms work in this method,
including every single one of these types of oyster mushrooms out there.
Now,
if you're curious about how mushroom spawn is even created so that we could grow
mushrooms either in our home or in our garden,
check out this video right here because I went up to Maine and visited North
Spore, tour their facility.
And it's really quite cool to see the whole process from start to finish.
Thank you guys for watching. Keep on growing and good luck in the garden.
