🛠️ How to open Lenovo Yoga 7i 2-in-1 (14", Gen 10) - disassembly and upgrade options

LaptopMedia
183 followers
Jun 12, 2025
🔬 In-depth Review: https://laptopmedia.com/review/lenovo-yoga-7i-2-in-1-14-gen-10-14ill10-review-stunning-oled-15-hr-battery-vegan-leather-style/
📈 💵 Specs and Prices: https://laptopmedia.com/series/lenovo-yoga-7-2-in-1-14ill10/
🎮 Subscribe to our GAMING BENCHMARKS channel:
https://www.youtube.com/channel/UCLJ-FnaQC5P7DAJnZz9YZFQ?sub_confirmation=1
Hello friends, today we'll open the Lenovo Yoga 7i.
As always you'll find everything about the laptop in our detailed text review on LaptopMedia.com.
The link is below the video.
Now let's start.
We use a Torx T5 driver to remove 7 bottom screws.
The first 4 near the front edge are just 3mm long.
The 3 screws closer to the hinges are longer, about 7.5mm each.
With a thin plastic tool we start popping the side clips right here.
We avoid the hinge area for now and you'll soon see why.
We rotate the laptop and continue working the pick along the chassis until the cover
is free near the second hinge.
The center is still latched, so to avoid breaking it we switch to a small suction cup.
We press the cup firmly onto a clean spot, dampening it slightly can improve the seal.
A steady pull forward and upward separates the panel from the frame.
This unit needs a bit of extra force, so take it slow and keep the angle gentle.
Done.
The lid has 5 plastic posts that slide in between the hinges.
Here they are, that's why we started from the side with the blue pry tool, then pulled
the cover forward before lifting.
Before we continue, here's the interior.
Single fan cooling, twin heat pipes, a compact 2242 SSD and all memory soldered to the board.
The RAM is LPDDR5X8533, offered in 16GB or 32GB dual channel configurations.
And it isn't upgradable later, so choose your configuration wisely when buying.
Downfiring stereo speakers flank the battery pack, aiming through generous cutouts for
clearer audio.
Next we disconnect the battery cable with a non-metal spudger to cut power.
The 70Wh lithium-ion pack is held by three 3mm screws.
Here goes the first one.
Now the second screw from the opposite corner.
The third screw is out, all removed with a JIS No.1 screwdriver.
Cable unplugged and screws gone, the battery lifts free.
Here were the screws.
You can check our battery life test results on LaptopMedia.com and don't miss our top
100 laptops with the best battery life ranking.
We loosen the single screw securing the SSD with the same JIS No.1 bit, its tip fits the
head perfectly.
The M.2 drive is a 1TB SK Hynix PC801 PCI Express 4x4 in the short 2242 form factor.
See our full review for our storage speed test.
When reinstalling, tighten the SSD screw to about 0.2Nm, no more.
If you want every detail on the Yoga 7i, including performance charts and display tests, read
our in-depth review on LaptopMedia.com.
Thanks for watching and see you in the next teardown.
