A Donald Deskey Original! Art Deco Furniture Restoration Remake

Antique Art Deco
12 followers
Follow along with this DIY Art Deco furniture restoration / makeover project, as we take on an original Donald Deskey piece! We were able to track this amazing vintage furniture piece back to its origin, from 1930's North Carolina via the Thomasville Chair Company. We'll cover how to repair furniture, the best furniture flip techniques we've found, while enjoying the old timey, retro vibe of the 1920's and 1930's Art Deco scene. We love antique furniture, black and white movies, and all things restoration. Enjoy!
#woodworking #furnitureflip #furniturevideo #furniture #artdeco #diy #furniturerepair #howto
Comments are disabled for this video.
Today we found a very rare piece of Art Deco furniture, attributed directly to one of the
most prolific industrial designers of the past hundred years, known for both his work in
architecture and furniture design. Welcome back to Montford Boulevard.
Join us for a rather challenging DIY Art Deco furniture restoration.
As always, all of our finished works are available for purchase in our store.
You can find the link in the description.
This Art Deco vanity had some pretty serious structural damage. It had veneer problems.
It was also missing the original mirror that was attached to the back of it.
But we were very excited to find this piece, primarily because the original tag was still
attached to the back, linking this to the Thomasville Chair Company.
Born in Minnesota in 1894, Donald Deske was integral to the Art Deco movement.
He's perhaps best known for his legendary design of the interior of Radio City Music Hall in New
York, New York. That includes some custom furniture he designed for the offices.
In 1931, Deske formed the company Ammo Deck,
aimed at making his luxurious designs more affordable for the American market.
Among his collaborators was the Thomasville Chair Company in North Carolina, which was tasked with
manufacturing Donald Deske's designs. That's why it was so exciting to find this tag on this vanity,
which we suspected was a Donald Deske original.
This piece was missing some crucial elements. You can see the shoe was broken off of the bottom.
That's how it should look. But this vanity only had one previous owner, and amazingly,
they decided to keep the pieces when they came off. It's not often you see that. It sure does help,
especially when you're dealing with curved wood like this. It's a lot of little pieces,
but this is a big head start in rebuilding the foot.
This is a really nice, high quality, thick piece of glass, but unfortunately, we can't use it here.
Same with the mirror in the back. Again, the bigger mirror that was originally on the back
of this piece broke. The previous owner was sad to report that. So I've taken the drawers out,
and we're going to see what it's going to take to get this thing apart. Now, unfortunately,
this piece of wood runs all the way across, so that does mean we're going to need to cut it.
First, I'm going to pop off this backing just to make it a little bit easier.
Now I've laid down cardboard to protect the front of it,
and I'm going to draw a line for my cut with the jigsaw.
Usually, this is a combination of using the jigsaw,
and then I'll use a handsaw when it gets kind of tight.
Pop that back off.
Sometimes these middle sections will be glued to the bases, and I'm really hoping that's not
the case. There's really not much use for these caster wheels, so we always get rid of them.
It tends to be kind of awkward what I have to go through to get these things apart.
I don't want to kick it, because if you damage the veneer, it can be a lot of extra work.
This piece fortunately wasn't glued, but there were a lot of nails holding the center section in.
It did take more force than I was expecting.
So, fortunately, that came apart pretty cleanly. I'll have to carefully tap those nails through.
Now here's something funny you see quite often in art deco furniture.
Look at these notes that somebody left scribbled on the inside,
almost like the handwriting they put on the wax paper of a hoagie, just to show that a human made
it. So that cut was pretty clean, and I got it quite close to the side. I probably shouldn't
cut it that close. You can see that little scratch from the saw blade on the veneer,
but fortunately that'll sand out no problem.
A little bit better look at the bottom. You can see the shoe,
and on this piece how it's missing that whole curve. So first off, we're going to take all
those pieces and see if we can glue them together. A lot of them do still fit.
Again, it's just so fortunate that they didn't throw these pieces away.
Got that held together with quite a few clamps here, and we'll let that dry for a bit.
Also, the dovetail joints and a couple of these drawers needed some glue,
so we'll let that dry as well. Take this moment to wash these pieces thoroughly.
As I was doing so, I noticed that a couple of these drawer tracks were loose as well.
But that's an easy fix.
You can see already that this is some really quality wood used inside these drawers.
Okay, now we're going to put that shoe back on.
That'll work just fine.
A closer look at these drawers and you can see, boy, that veneer is going to need a lot of work.
We took the handles off and we want to hit them with the wire wheel
just to see what the metal looks like. Every once in a while we'll find solid brass handles.
It's not going to be the case here, but we wanted to see if these are an option.
Ultimately, we decided not to go with the original handles,
but we're definitely going to save these for another piece.
They almost have more of an Art Nouveau vibe to them, and we do work in that genre as well.
Working on the veneer, we're going to get some wood glue under there.
And now I'm going to work on filling those gaps in the sides.
Fortunately, again, we don't have too much work to do there.
The damage really was minimal when we pulled these apart.
Add a little bit of body filler.
Now I'm going to deal with these gaps. That was where the original mirror was
on the back of this vanity. I found a block of wood that'll work just fine, so I traced the lines.
I made the first two cuts on the table saw, and the final one on the bandsaw.
Drop that in there, and that'll be good enough.
Okay, time to sand these pieces, and this really was a lot of work.
It was a thicker finish they had on here, which was a sign of quality,
but it took a lot of effort to get it off.
I always prefer thicker veneers. This was both a thick finish and a thick veneer.
But it's easier to sand them without causing any damage when the veneer is
high quality and thick like this.
Now we're adding some natural stain. This is some really rich wood,
so we don't really need to add any color. This is just a natural oil-based stain.
Clean that off real good after the stain's fully dried.
Before we start the touch-up with the lacquer powders, we do need a coat of lacquer to work with.
Look at that natural wood starting to show through.
Desky liked to work with walnut a lot.
So we've got a shellac here that's going to go on the inside,
and again you can see they weren't working with junk wood even for the insides of these drawers.
Look at these rich colors.
Really, that's nice to look at. It's kind of surprising.
Okay, on to the touch-up with the lacquer powders.
We've had some questions about lacquer powders, so we're thinking about doing a more in-depth video
just about this method of touch-up. If that's of interest, let us know in the comments.
First we match the base color, then go over top of it with lights and darks if necessary
to match the grain. It's French lacquer that we're using to activate these powders.
Now we're going to add a black stripe, again with a lacquer-based paint,
and go over top of everything with some satin, and that should do it.
Hopefully even for the more discerning customer.
Now on to the handles, and we're again referencing Donald Deskey.
This is his design featuring aluminum underneath wooden handles.
Notice the way the wooden handle curves into the drawer face. We hope to mimic that.
First, I've cut some one-inch square blocks with the table saw.
Now I'm going to use the grinder to knock the edge down.
This is to get that curve going into the drawer face.
And the rest of that we'll do by hand. It really doesn't take as long as you'd think.
Just about like that. And here they are, all six of them.
Next, we realized we can use the belt sander to carve out a little ridge that your fingers can
catch. We're not sure if Deskey's handles had these, but we think it would be a nice addition.
It'll need to be hand-sanded a little bit, of course.
But here's the idea. It's not that deep, but it really does make a difference,
just so you have something to grip.
Now we're going to test it with a card that's representing the aluminum.
Here we have a miter box with a hacksaw to cut the aluminum.
This is a little less than a quarter inch thick, and it does take a lot of work to get through it.
But that's going to look so nice. I'm going to add some of that same natural stain to the top.
And again, you can see some really rich wood coming through here. This is the natural color.
Okay, now I'm going to add a black border.
You see a lot of black trim and black borders in Deskey's work.
In fact, for the sides, we're going to reference another Donald Deskey dresser,
focusing on the way he lets just three stripes of the natural wood show through.
I specifically bought this piece of wood because it was the exact thickness I was hoping for,
not quite a quarter inch. It was actually five millimeters, which is about 0.19 inches.
Hand sand it, including the edges. There's going to be a larger black panel for the sides, so
instead of trying to spray the whole thing, I'm going to brush this latex paint.
And then once it dries, we will coat it. This is with a brushing lacquer.
I then buffed it out with steel wool, and I'm going to spray lacquer over top,
just to get a nice smooth finish.
Okay, I'm using two-part epoxy and wood glue
to affix these strips on the side. Put some weight on them, let them dry.
And then here's that larger panel I was talking about.
You can see the Donald Deskey effect starting to show through with those three stripes at the top.
A few little things to touch up on the sides, not a problem.
And we're going to use the nail gun to make sure everything stays down.
We did that on the upper strips as well.
Now we have a hot knife and furniture wax to fill those nail holes.
Just a drop in each hole, then we'll come back and buff it out with a cotton rag.
Looking pretty good.
Now one more coat on the top with lacquer.
This is probably the third coat we've added so far.
And the sides one more time, just to give everything a nice even finish.
Here's a new wood stamp we have with our logo. Pretty neat.
Have a bunch of them ready to go.
And with that, she's ready for her close-up.
Really, it's amazing that you can get a look this modern with something out of the 30s.
The original vanity pretty dinged up and converted into a set of nightstands.
Donald Deskey was aiming to make his design work more affordable for the average household,
and our hope with this project was to take one of those average pieces
and bring it up to the level of his higher-priced commissions.
Thank you so much for sticking with us.
You can find the link to purchase this piece in the description.
If you enjoyed this video, here's a couple more you can watch.
Thanks so much for subscribing and for chatting in the comments below.
You're welcome back here at Montford Boulevard anytime.
