🌻CROSS PATTERNED STRAW BAG MAKING 🌻

DIY Crafts & Art
164 followers
Hello to all of you. Welcome to my channel.
In this video, I will share with you the making of the bag that I prepared using paper tape.
I used paper tape in my model.
It will be enough to take about 300 grams of paper tape.
In this way, I want to share the dimensions of our bag with astar and magnet.
The width is about 40 cm.
The height of our bag is about 30 cm.
The dimensions here may vary depending on the thickness of your rope, the tightness or looseness of your hand knitting.
After showing it this way, let's move on to the making of our bag.
Let's start making our base.
After taking my rope in the form of paper tape, I make it into a ball like this and apply the softening process.
I will use my crochet hook number 6, 3.5 mm.
In the measurements I have made, you can do it not only for this model, but also for many different beach bags.
The width of our beach bag will be about 40 cm.
I think it's not too big, not too small, it's ideal.
Let's start by pulling a chain.
I'm telling you in detail if there's anything to start with for the first time.
I turned my rope around on my crochet.
I took a loop and passed it through.
Let's prepare 45 chains in total.
We pulled 45 chains.
I said it would be a bag about 40 cm wide with the numbers I gave.
But according to your hand measurement, it can show a few centimeters of difference.
We pulled 45 chains.
We will go to the point where we started by making frequent needles in the chain space behind the last chain we made.
I make frequent needles in the chain space behind.
It's not too loose, it's not too high, it's not too deep.
I'm trying to bring my loop to an even level with my crochet.
We pulled 45 chains from our chain space behind.
We make 44 frequent needles in this way.
I'm making two more at the point where I started by pulling the first chain.
We make 3 frequent needles in the same space.
This is how we make the corner turn.
We make frequent needles that coincide with the frequent needles we make.
The gap part is already clear.
We make frequent needles again at the point where we made the corresponding frequent needles.
This is how we will progress to the other corner.
We will proceed until the corner.
If we look at it like this, we made 3 single crochets in the corner.
We make single crochets so that they coincide with each other.
We come to the other corner.
If you watch the video without skipping, I will share all the puff points in the video.
We will create our rectangular base very easily without confusing you.
Now we have come to the other corner, this part is very important.
This is the point where I started my first single crochet after the chain.
This is the corner part.
The part that looks like a hole is the point where I started my first single crochet.
How do we do it when we come to this part?
I'm sinking 3 single crochets to the point where I'm going to sink my last single crochet.
One, two, three.
I made 3 single crochets after the chain.
I made 3 single crochets from the top of this point.
We are making 6 in total in this corner.
Since our rectangular base is small, it is not very clear.
The number of rows will be more clear as it increases.
I made 3 single crochets to the last part.
I made 3 single crochets to the top of the first single crochet I started.
3 single crochets, 3 single crochets.
It was formed.
From now on, we never increase in the intermediate parts.
We will only increase in the corners.
I'm making my single crochet from the top point.
Single crochet from the top point.
Let's go to the other corner by making one single crochet in this way.
Our rectangular base will be like this and like this.
We came to the other corner part.
At this point, while making the corner turn, we came to the same point where we made 3 single crochets in the same hole.
Here I am making 3 single crochets from the top of the first single crochet I made.
We skip the second top point.
We will make 3 single crochets from the third top point again.
In this way, we will have formed 2 corners by making 6 single crochets in total here.
We skipped one in between.
We made 2 corners.
We make 1 single crochet from the top points in between and go to the other part.
We do not make a joining point.
We weave back and forth.
I will share all the details with you in the video.
We have completed the most important 2 corners in this way.
In this way, let's move on to the other corner.
We came to the other corner.
As we knit, we straighten our hands by opening it like this.
We will always do this process in crochet.
Now our corners will become more clear.
At this point, we came to the part where I made 3 single crochets in the same hole.
Here, let me show you our first single crochet again.
I made 1 single crochet in my first single crochet.
I will make 3 single crochets from the top of the second single crochet.
I made 2-3 single crochets in the same hole.
I made 1 single crochet from the top of the 3rd single crochet.
Now, we came to the same point where we made 3 single crochets right next to it.
Here, I make 3 single crochets from the top of the 1st single crochet and the top of the 2nd single crochet.
I make 3 single crochets from the top of the 2nd single crochet.
I made 1 single crochet from the top of the 1st single crochet and the top of the 3rd single crochet.
We will always proceed by making 1 single crochet to the remaining top points.
We straighten our hands again.
In this way, the rectangular part of our base will be advanced.
Now, as we do a few more rows, it will be clearer as it grows in the same way.
The logic is always the same.
The operations we will do from now on are like this.
Let's make 1 single crochet again.
Let's go to the other corner.
We came to the other corner again.
We knit back and forth because we did not join.
In the corner, I made 3 single crochets from the top of the 1st single crochet to the top of the 2nd single crochet.
I make 1 single crochet to the 3rd single crochet.
I make 3 single crochets from the top of the 3rd single crochet.
In the meantime, as our row grows, the single crochets we sink until we reach the corner will increase.
I will tell you all of them.
We always sink into the parts in between until we reach the other triangular corner.
When we come to the triangular corner, look at 1, 2 and 3.
I made 1 single crochet to the top of the 3rd single crochet.
We make 1 single crochet to the top of the 2nd single crochet.
We make 1 single crochet to the top of the 3rd single crochet.
If we fix the corner with our hands like this again,
I'm going to make 3 single crochets in the same hole I sink into.
that corner, one in the first, three in the second, one in the third, one in the other corner,
one in the corner, three in the second, three in the point of the second frequent needle,
Let's come to the other corner by making one single crochet in between.
Now we came to the other corner again.
1 single crochet to the first peak of the trio we looked at in the corner.
1, 2, 3 single crochet to the second peak.
1 single crochet to the third peak.
We are sinking one by one until we come to one of the triples at the top points in between.
Look, we came to the triple frequent needles at the same point again.
Here again, we start with one for the first one,
three for the second one,
1, 2, 3
I tried to explain the logic of the base in this way in detail.
I hope it is understandable.
We fix it with our hands again.
Now, if we look between the triangles in the corner,
we had 2 single frequent needles in a row.
Our triangle in the corner has 1, 2, 3, 4 single needles.
I will do it until I have 7 rows.
Let's create our rectangular base in the same logic until we reach the base size you want.
I hope it is understood.
I completed my base row in this way.
I didn't do the iron.
If you have a bruise on your hand, you can do it with a steam iron.
Now I want to share the measurement.
The length is about 34-35 cm.
The width is about 9.5-10 cm.
The measurements here will vary depending on whether your hand is tight or loose,
whether your rope is thin or thick.
This measurement was enough for me.
Now, which part do we finish last?
This is the part where the motifs are right and left.
The middle chain point.
1, 2, 3, 4, 5, 6, 7.
It should be equal at the bottom.
1, 2, 3, 4, 5, 6, 7.
7 rows are equal to each other.
If you look at the intermediate points,
1, 2, 3, 4, 5, 6, 7, 8, 9 and 10 single needles between the pairs in the corner.
It should be the same number in the opposite direction.
Let's get a balanced rectangular base.
This is the point where we made a pair.
1, 2, 3, 4, 5, 6, 7, 8, 9, 10.
And the pair in the other corner.
All numbers are equal.
Well, here at the end, we make one on the first of our pair.
We don't make three on the second anymore.
We finish at this point.
We made one on the first of our pair in the first corner.
This is how we finished our base.
Now we move on to the motif part of our bag.
At this point, you can use it for the construction of the same rectangular base for many bags, not just for this bag.
Now, I take the upper wing and the two parts of the inner wing from the crochet hook.
I'm starting to make frequent needles.
If we only take this, if we take the upper left wing, there may be a gap in the knitting in this part.
That's why I take the part that looks horizontal from the inside to the crochet hook.
I take both of them together.
Without opening in this way, I take the whole area more tightly.
Look, I took one and took the image with the only line next to it from the inside.
This is how we go around the whole area.
We don't make increases anymore.
We have obtained our rectangular base.
Let's come to the starting point by making one around the whole area without increasing in the corners.
Now we have come around one row.
At this point, it will not rise up immediately.
After knitting a few more rows, it will start to rise up because it will not expand anymore.
Now, if you wish, you can knit by turning from the top of the first row that comes right in front of us.
I will show you how to knit by making a secret combination.
You can do this not only in this bag, but in many bags.
In many knitting techniques, this was the first frequent needle I started with.
The first frequent needle I started after the base.
After I got to this point, I passed my crochet from the top of my first frequent needle.
I took my loop inside with the tip of my crochet.
Now there was a single horizontal image.
I passed my crochet under the horizontal image over there.
I passed my loop.
I tightened my rope slightly so that it wouldn't be too much.
I took a loop.
I passed one through both of them.
I made my first frequent needle.
This is how I made the first frequent needle of my second row.
We continue to make our frequent needles again from the top point right next to it.
Let's go all the way around from the next top point and come to the point where we started.
I'll show you how I did it again at this point.
Now we've come to the second row of the combination.
How did we say?
I take my crochet from the top of the first frequent needle I started with and pass my loop inside.
When I pass my loop inside, a horizontal image was formed.
I passed my crochet under this horizontal image.
I passed my crochet from the loop.
When I pull my rope, I shrink my loop.
There should be no gap or looseness here.
I took a loop.
I passed it under both of them.
I'm making frequent needles.
This is how we made the first frequent needle of our third row.
We continue to make our frequent needles from the top point right next to it.
Now, when we finish this row, we will come to this part by making our frequent needles at the end.
When we come to this part, this is the first frequent needle of our next top row.
But since there is no top point of this, I will pass my crochet from the top point to the top point.
I'll take my loop and pass it inside.
There will be a horizontal image.
I'll take my crochet from the bottom of this horizontal image.
I can continue all my rows by doing the same thing I did here.
We will always do the same process from our frequent needles to the top row.
If you wish, we have created our base.
You can make this part shorter or longer if you wish.
I will start explaining the motif row after knitting 3-4 rows.
The number of rows is completely up to you.
You can make 6-7 more rows.
I will not show the joining part in the next step.
Let's make frequent needles all around until we reach the desired size.
Let's move on to the motif part.
After making 3 rows of motif rows from the base, I made 1-2-3-4-5-5 rows of frequent needles on it.
You can increase or decrease the number here or there.
There is no difference.
You can only make the number of rows of the same process different.
I wanted to show you after doing a few rows.
I joined my row by doing a secret combination.
I made 3 chains.
Now we start making motifs.
I wanted to show you after doing this part.
We made 3 chains.
We do the same thing we did here at this point.
I took a loop on my crochet.
I make a double handrail right next to the part where I pulled the chain.
I took a loop.
I took a loop on my crochet.
I made a loop at the next point.
I make a double handrail right next to the part where I pulled the chain.
I made 3 triple handrails.
in sequence.
You can make dross without looping the hook.
You can do it here, I went through my handrail up to my top at the top of my handrail.
I took a loop from the back, we flex here so that there is no tension here, I took a loop, I took all of them out.
the resulting image will be like this.
Now let's do one more.
I got a stitch to my crochet.
I'm making a double handrail from the second peak point.
It's not too tight, it's not too loose.
I took a loop on my crochet.
I took two of them out of the peak point next to it.
I took a loop.
I took two of them out of the peak point next to it.
We've made three double handrails in my crochet.
Now we've skipped a double handrail over there.
We skipped a peak point.
I took my crochet from the peak point we skipped here.
I took my rope from the back and I'm stretching it.
I'm bringing it to the same line over there.
Let's not stretch it too much.
But it's tense.
We can fix the line like this.
This is how our model will be.
I took a loop on my crochet.
We skip a peak point and make double handrails at the second peak point.
Let's do the same process here until the end of the line.
Let's get to the starting point.
When I come to the end of the line, I have 34 motifs in total.
If there is one peak point left in that part, you can make it not triple, but quadruple.
Or if it doesn't look too empty, you can make it triple and leave it empty.
Adjust yourself according to the image in this way.
Now how do we get to the top by combining?
This is the chain I pulled.
I took my crochet from the top of the chain.
I took a loop.
I took it from the loop on my crochet.
Now I'm making one more loop at the peak point in front of me so that our handrails go evenly.
I pulled 3 chains.
I took a loop.
I'm doing this so that the bottom and top are equal at the next peak point.
We made 3 double handrails with 3 chains at the next peak point.
We created a cross pattern at the peak point at the back.
This is how the image was created.
We're skipping a peak point right next to it.
We skip the first handrail peak point we made.
We make our double handrails from the peak point next to it.
And finally, we make another double handrail on top of the cross.
We make a cross pattern on the empty part behind.
We will proceed in this order.
We will combine it in the same way and continue our turn.
After completing the second row, I made a slip stitch from the top of the point where I pulled the chain and combined it in order.
I'm just pulling a chain at the beginning.
We make single crochets from the peak point right next to it.
We make a single crochet at each peak point.
We make a single crochet at each peak point without increasing the number of rows we make here.
Let's get to the point where we started.
Let's get to the end of the line.
At the end of the line, we make a transition to the top row with the secret joining technique.
In the meantime, we will continue by making the number of single crochets here.
As I said, if you wish, you can change the number of rows here as you wish.
You can create the model you want with the knitting technique.
Now let's knit a few more rows in the same technique.
Let's use the numbers we want and move on to the end of the bag.
I completed my bag like this until it was 30 cm.
Now, if you wish, you can make a slip stitch in the top row.
Don't leave it like this.
I made a slip stitch from the first loop so that the top part is a little tighter.
If you wish, you can continue by making a slip stitch in all the loops in this way.
This is the resulting image.
If you wish, I made a slip stitch from the point where we came to the end of the row.
I'm pulling a chain.
Now we're going to make a model backwards.
We're going to sink to the top points.
I just took the loop back and passed it through.
If you wish, you can skip 1 at each top point and make 1 according to the tightness of your hand and make it at the other top point.
I took a loop.
I took a new loop and passed it through both of them.
I did it by skipping one.
I took a loop.
I passed it through the other one.
I took a loop from the back.
I passed it to the front.
I took a loop from both of them.
I took a loop from the back with my crochet.
I took a loop from both of them.
After doing it a few times, it's not complicated at all.
You can easily make this pattern.
Sometimes I skip one.
Sometimes I skip two.
Don't be too tense.
As we do, we slightly open it with our hands to fix it.
It is important not to deflate without expanding too much.
I hope it is understood this way.
Now let's go around all around like this.
Let's get to the starting point.
When we come to the last part, I left my rope short.
I cut it.
I cut the rope.
We take the inside of the bag from the point where we first started so that it is not obvious.
If you wish, you can turn it around so that there is no opening.
In this way, we have completed the detail part without knowing where to put it together.
Now you can run the rope we cut here under your knitting bag.
You can tie a few knots.
It is intended to prevent it from being removed.
Here, too, we can cut it after running a few rows under the knitting so that it does not appear from the outside of our knitting.
This is how I wore my leather hangers.
While wearing the hanger, I first glued the hard goat to the hard goat on the bottom.
I didn't do this in every model.
If you wish, you can use it this way.
If you wish, you can use it as you knit.
Let me show you from the inside.
After cutting the goat in the base size, I glued the thick goat inside with silicone.
If you wish, you can use it this way.
This point is important for making the hang of our bag.
First of all, we need to determine the edge part so that it is exactly the middle of the base.
After determining this edge part, you can measure it.
You can do it by eye.
We sew our hangings so that they are equal on the right and left.
I'm doing a normal stitch here.
In this way, it can also be called a thread needle that my paper thread passes through.
I made a normal knot with a thread that my paper thread will pass through.
I sewed my leather hanger like this.
If you wish, you can also sew your knitting hanger.
Let me show you the other part.
In this way, we have completed the knitting of our bag.
I prepared the hanger for the hanger of our bag.
It was not understood because the color was dark.
How to make a pocket hanger.
How to make a pocket hanger in plastic bags.
How to make one pocket or two pockets side by side.
I made a detailed explanation of these.
I will add it as a link to the description section at the bottom of the video.
You can also prepare your hangers by watching from there.
If you wish, after the bag is finished, you can sew the crackling magnet to the middle part.
I think I tried to explain in detail in this way.
I hope it was understandable.
If you have any points, you can write them as a question in the description section.
I would be very happy if you share your opinions with me in the same way.
Thank you for watching my video.
See you in the next video.
Goodbye.
