Starship Flight 9 Spinned and Exploded again, Why? SpaceX Next-Gen Solution, China | Space Weekly #5 === #greatspacex#elonmusk#spacex#nasa == Advertisers who want to place ads on our channel, please contact the email manager: [email protected] === SpaceX Starship SN Be the first to sponsor us Thank you. https://www.patreon.com/GreatspaceX?fan_landing=true === Starship Flight 9 Spinned and Exploded again, Why? SpaceX Next-Gen Solution, China | Space Weekly #5 Elon Musk confirmed a tank leak caused the Starship Flight 9 explosion, while Ship 35’s payload bay door failed to open, halting deployment. He also revealed a first look at the next-gen hot-staging design, hinting at future upper-stage upgrades. Meanwhile, China unveiled a Starship-like rocket, drawing attention with its striking resemblance to SpaceX’s design. Here’s a quick rundown of the biggest developments this week—only on Great SpaceX. Starship Flight 9 Spinned and Exploded again, Why? SpaceX Next-Gen Solution, China | Space Weekly #5 "'TANK LEAK!'' Elon Musk Revealed WHY Starship Flight 9 Exploded… Excitement mixed with a hint of regret—that’s the lingering emotion after yesterday’s Starship flight. There’s no question SpaceX made real progress. Key systems performed better than in previous missions, and the overall execution showed major improvements. But despite those gains, the mission ended with a sense of incompleteness, as both the Super Heavy booster and the upper stage failed to finish their journeys. Now, all eyes are on what caused those unexpected failures. What went wrong? Why did it happen? And how can SpaceX use this experience to improve? Starship Flight 9 Spinned and Exploded again, Why? SpaceX Next-Gen Solution, China | Space Weekly #5 The afternoon at Starbase was as breathtaking as ever. About 30 minutes before launch, the live stream kicked off, capturing the mesmerizing scenes of venting and fuel loading as anticipation built across the world. The countdown faced two brief holds, but those delays only heightened the suspense and made the moment even more thrilling. Then it happened—the moment we had all been waiting nearly three months for: Starship lifted off. All 33 Raptor engines ignited as expected, pushing the massive rocket off the pad with thunderous force. After successfully passing Max-Q, the vehicle moved into the separation phase using the hot staging technique. Main Engine Cut-Off (MECO) went exactly as planned, with all 30 outer and center ring engines on the Super Heavy booster shutting down precisely for stage separation. Simultaneously, six engines on the upper stage ignited flawlessly, sending both stages on their separate paths. ---- We use images and content in accordance with the YouTube Fair Use copyright guidelines: https://www.youtube.com/intl/en/about/copyright/fair-use/ Any questions about copyright please send us via Gmail: [email protected] To be resolved, thank you.
Elon Musk confirmed a tank leak caused
the Starship Flight 9 explosion while
ship 35's payload bay door failed to
open, halting deployment. He also
revealed a first look at the nextG
hotstaging design, hinting at future
upper stage upgrades. Meanwhile, China
unveiled a Starshiplike rocket drawing
attention with its striking resemblance
to SpaceX's design. Here's a quick
rundown of the biggest developments this
week, only on Great SpaceX. Excitement
mixed with a hint of regret. That's the
lingering emotion after yesterday's
Starship flight. There's no question
SpaceX made real progress. Key systems
performed better than in previous
missions, and the overall execution
showed major improvements. But despite
those gains, the mission ended with a
sense of incompleteness as both the
Super Heavy booster and the upper stage
failed to finish their journeys. Now all
eyes are on what caused those unexpected
failures, what went wrong, why did it
happen, and how can SpaceX use this
experience to improve. The afternoon at
Starbase was as breathtaking as ever.
About half an hour before the launch,
the live stream kicked off, capturing
the mesmerizing scenes of venting and
fuel loading as anticipation built
across the world. The countdown faced
two brief holds. But those delays only
heightened the suspense and made the
moment even more thrilling. Then it
happened. The moment we had all been
waiting nearly 3 months for. Starship
lifted off. All 33 Raptor engines
ignited as expected, pushing the massive
rocket off the pad with thunderous
force. After successfully passing Max Q,
the vehicle moved into the separation
phase using the hot staging technique.
Main engine cutoff went exactly as
planned with all 30 outer and center
ring engines on the Super Heavy booster
shutting down precisely for stage
separation. Simultaneously, six engines
on the upper stage ignited flawlessly,
sending both stages on their separate
paths. For booster 14, this was the most
critical test yet. The boost back burn,
which had caused issues in flights seven
and eight, went incredibly well. All 10
center engines ignited perfectly with no
failures. A major step forward and a
clear demonstration of SpaceX's
continuous improvements. The booster
then moved into the landing phase,
shutting down its engines as the hot
stitching ring was successfully
jettisoned. Unfortunately, despite the
promising performance up to that point,
B14's journey ended in disappointment.
As it approached splashdown, the engines
were supposed to reignite to decelerate
and control the descent. But something
went wrong. One of the center engines
appeared to fail at a critical moment.
Before there was time to analyze what
had gone wrong, B14 exploded midair just
before reaching the ocean and its signal
was lost. While the Gulf waters weren't
far away, B14 never made it. Shortly
after the flight, SpaceX released a
statement. First reflight of a Super
Heavy booster. Today's test objectives
were designed to intentionally push
Super Heavy to the limits, giving us
real world data about its performance
that will directly feed into making the
next generation booster even more
capable. Regarding safety, they
reassured the public. As is standard for
each test, the area in the Gulf
containing the booster's flight path was
cleared prior to launch. As for the
cause of the explosion, no official
details have been shared yet. However,
it's possible that the ambitious
objectives SpaceX set for this flight
played a role. Specifically, B-14 was
tasked with testing a high angle of
attack landing profile, which aims to
conserve fuel by descending more steeply
and resisting drag headon. While this
could optimize future landings, it also
introduces greater aerodynamic pressure,
and B14 may have exceeded its tolerances
during that demanding maneuver. The
engine failure could also be related to
ongoing issues with the igniter system,
a known concern that SpaceX has been
actively working to improve. In any
case, while the loss of B14 is
disappointing, it's important to
recognize that the booster was never
intended to return to the launch site.
The sea landing was always meant as a
testing opportunity, and in that sense,
the test was successful in gathering
vital data. Most importantly, this
flight marked a major milestone, the
first ever re-flight of a super heavy
booster. And despite its fiery end, B14
managed to demonstrate real progress in
key areas, especially overcoming the
persistent boostback burn challenge. Its
contribution to the program, both past
and present, cannot be understated.
Still, it's hard not to feel a bit of
regret. B14 had already proven itself in
previous missions, and there was a
collective hope that this reused booster
would complete its journey with a more
fitting finale. But in the grand scheme
of pushing the boundaries of reusability
and rapid development, B14 served its
purpose with honor. So, here's to B14, a
booster that may not have had a perfect
ending, but one that helped pave the way
for a more capable and resilient
Starship system. Thank you, B14. Now,
let's shift our focus to space. Flight 9
brought major improvements, especially
from ship 35's ascent phase. All six
Raptor engines performed well, clearing
a key hurdle that tripped up previous
flights, notably flights seven and
eight. This smoother ascent marked a
promising sign for the program's
technical progress. However, not
everything went according to plan.
During ascent, a brief fire appeared
near one of the vacuum engines and its
skirt. Though it didn't immediately
affect the mission, it raised concerns.
Around 8 minutes in, both vacuum and sea
level engines shut down cleanly, marking
the second engine cutoff, or SECO. Ship
35 then entered orbital coast at over
26,000 km/h. Next came a critical
milestone, payload deployment, expected
around T + 17 to T + 18 minutes.
Unfortunately, this did not occur. The
issue seemed to involve the payload
door, which may have failed to open.
This mirrors flight 3 when the payload
bay door only partially opened, likely
due to mechanical or structural
concerns. Once again, SpaceX will have
to wait for a future test to validate in
space deployment. Things quickly
escalated from there. Around t plus 40
minutes, ship 35 began to lose control
during re-entry. Onboard footage and
simulations showed the vehicle spinning
violently. Re-entry conditions were more
extreme than ever with ship 35 enduring
tremendous aerodynamic and thermal
stress. Despite the loss of control,
SpaceX appeared to continue monitoring
descent actively, possibly to keep the
ship in a designated corridor or collect
valuable re-entry data. This effort may
have also served to evaluate the
performance of the new V2 Starship
upgrades, including improved engines and
revised flaps. Then, at T plus 46
minutes after a brief blackout, the
onboard camera came back to show severe
damage to one of the aft flaps. Roughly
25% had been burned through. The flight
ended shortly after. Musk later
confirmed the primary cause of failure,
a leak in the main propellant tank. This
caused a loss of pressure, preventing
fuel from reaching the engines and
leading to loss of control. He stated
leaks caused loss of main tank pressure
during the coast and re-entry phase.
While the exact source of the leak
remains unknown, it likely resulted from
either harsh flight conditions or
pre-launch system vulnerabilities.
Despite the turbulent ending, SpaceX
collected critical data. One of the most
encouraging outcomes was confirmation
that the heat shield tiles remained
intact during ascent, signaling progress
on the thermal protection system.
Overall, this test flight was a mix of
breakthroughs and missed targets. SpaceX
achieved a clean ascent, stable orbital
insertion, successful engine shutdowns,
and validated upgrades to its heat
shield. However, several mission goals
remain unmet. successful payload
deployment, reigniting engines in space,
controlled splashdown of Super Heavy,
stable re-entry, and a soft ocean
landing of the upper stage. Still, each
mission success or failure brings SpaceX
closer to full orbital reusability. The
insights from ship 35's flight will
directly inform refinements for future
tests. And though this journey ended
short of its goals, it marks another
important step toward the broader vision
of reliable, reusable space flight. With
flight 9 now complete, attention shifts
toward the future of the Starship
program. Although both stages fell short
of their final goals, the mission
yielded valuable data and marked clear
progress in SpaceX's push for a fully
reusable launch system. SpaceX
emphasized this in their post-flight
statement. The teams will continue to
review data and work toward the next
flight test. With a test like this,
success comes from what we learn. Musk
echoed the sentiment, stating, "Lot of
good data to review." Notably, Flight 9
appears to have aligned well with
SpaceX's internal objectives. This could
allow the company to bypass a formal FAA
investigation, something that delayed
earlier flights and accelerate the pace
of future launches. Musk confirmed plans
for a faster cadence, saying on X that
SpaceX is targeting one every 3 to four
weeks for the next three Starship
flights. If this timeline holds, flight
10 could launch by midJune, with flights
11 and 12 following before the summer's
end. Flight 10 will carry heightened
expectation is expected to attempt
objectives Flight 9 nearly accomplished
such as payload deployment, reigniting
engines in orbit, surviving re-entry,
and executing soft ocean landings. For
now, SpaceX plans to stick with
splashdowns rather than attempting to
catch the stages with the tower's
mechanical arms, a goal reserved for
later tests. The next flights will build
on Flight 9's key successes, including
the booster's flawless boost back burn
and the ship's stable performance during
ascent and coast. These achievements
serve as foundational steps toward
achieving full reusability and
interplanetary mission capability. With
test cadence increasing, Starship
development is gaining serious momentum.
By the time flights 11 or 12 roll
around, likely in July or August, we may
see more complete mission profiles,
including controlled landings and
extended orbital operations. In the
meantime, Starship supporters are
encouraged to stay engaged. Leave a
comment saying, "Let's try again." and
keep the conversation going. Every test
brings us closer to the reality of
multilanetary life. Regrettable. That's
still the word we have to use when
talking about Flight 9. One of the most
anticipated new milestones, the payload
deployment, didn't happen due to an
issue with the payload door. Now, it's
time to take a closer look at the design
and mechanics of this system. What
exactly went wrong, and how will SpaceX
need to improve it moving forward? Well,
it's safe to say that the last Starship
flight, while not entirely successful,
still made a powerful impression. One
moment in particular stood out among the
highlights at T + 15 minutes and 3
seconds. We were treated to a stunning
view inside the Starship's payload bay.
For the first time ever, footage
revealed the payloads and the PEZ
dispenser deployment system installed
inside the spacecraft. Even though these
were just dummy payloads, still the
excitement was undeniable. We also got
our most comprehensive look yet at the
layout and structure of the payload
section itself. This is something many
fans and observers had been hoping to
see for quite some time. Unfortunately,
the two previous Starship flights failed
too early in the mission for any similar
footage to be captured. So, when we
finally saw the interior on Flight 9,
the excitement and anticipation
skyrocketed. Everyone was expecting to
see the payloads deployed just as the
simulations and 3D animations had shown
cleanly, efficiently, and elegantly. But
that expectation quickly turned to
confusion when the mission passed the
planned payload deployment window and
nothing happened. Soon after the issue
was revealed. The payload door had
failed to open. Now that raises a pretty
important question. Why? From what we
saw before the flight, everything seemed
to be working perfectly. Whether it was
during testing or while the payloads
were being loaded, the door appeared to
function smoothly. So what went wrong
when it mattered most during flight?
There could be many possible
explanations, but one particularly
interesting analysis has gained
attention on X. It came from an
experienced engineer who specializes in
designing submarine doors. He pointed
out a fascinating parallel between his
work and the aerospace world, noting the
contrasting pressure dynamics involved
in the two environments. He explained
that underwater systems deal with
compression pressure or pressure from
the outside pushing in, whereas
spacecraft in the vacuum of space deal
with expansion pressure or internal
pressure pushing out. This is why
submarine doors typically open outward.
They're sealed from the pressure of
water pressing inward. Spacecraft doors,
on the other hand, are usually designed
to open inward, using internal pressure
to press the door against the hull and
maintain a seal. But here's where things
get more complicated for Starship.
Unlike the pressurized crew compartments
of other spacecraft, Starship's payload
bay isn't designed to be pressurized.
That means it doesn't have any internal
pressure to push the door outward or
hold it tightly against the structure.
Without that force, the door relies
entirely on its mechanical actuator
system for stability and movement. This
becomes a serious issue in the vacuum of
space. With no opposing pressure to help
stabilize the door, it essentially
becomes loose, making it vulnerable to
shifts, wobbling, or even becoming
jammed. The actuator mechanisms that
open and close the door are now solely
responsible for its movement. But they
weren't designed to handle that level of
instability on their own. If the door is
slightly misaligned or under mechanical
stress, the actuator could struggle or
fail entirely, just like we saw on
flight 9. And that's not all. The
structural reinforcement of the payload
door also appears to be lacking.
Evidence of this goes all the way back
to flight 3, where the door seemed to be
held in place with only a few weak
support bars. That kind of setup might
be fine for testing on the ground, but
it's a major liability during flight. A
door that isn't properly braced is not
only harder to control, but it could
also flex or shift under the forces of
launch and maneuvering, potentially
damaging surrounding systems or
compromising the spacecraft's integrity.
The risk increases even more if the door
is forcibly opened in that state.
Without adequate reinforcement, a
malfunctioning payload door might
scrape, jam, or even damage the internal
deployment system. That could put the
payloads themselves in danger and
jeopardize the mission's success. So,
what's the solution? SpaceX will need to
add stronger structural reinforcements
to stabilize the door. These
reinforcements must be firm enough to
hold the door in place during all phases
of flight, yet flexible enough to work
in concert with the actuator system. The
goal is to create a design that allows
for controlled, reliable opening and
closing, even in the low pressure
environment of space. Better alignment,
locking mechanisms, and actuator
synchronization will likely be part of
the fix. In addition, SpaceX may need to
revisit the entire payload bay design
philosophy. If pressurizing the bay is
not an option, then every component,
especially the door, must be fully
optimized for vacuum conditions. That
could include new materials, better
hinges, advanced sensors to detect
alignment issues, or even alternate
deployment systems that aren't as
dependent on a single large door. The
analysis about pressure dynamics and
structural stability sheds a lot of
light on why this issue occurred, and it
serves as a reminder of just how complex
these systems are. So, what do you
think? Was the design of the Starship's
payload door flawed from the start? Do
you see any other potential issues that
might need to be addressed and what
should SpaceX prioritize in the next
round of upgrades? Let us know your
thoughts in the comments section down
below. Then don't forget to like the
video and subscribe to our channel so
you can stay up to date on every step of
SpaceX's development journey. Solving
the payload door issue is absolutely
essential for SpaceX as it sets its
sight on increasingly ambitious
missions. This isn't just a minor
technical glitch. It's a key piece of
the puzzle that will determine whether
Starship can fulfill its full potential.
First and foremost, fixing the door is
crucial for completing the immediate
task of deploying demonstration
payloads, something that was not
achieved during the last flight. Proving
this capability is a foundational step
before SpaceX can move on to more
advanced mission profiles. Once that
hurdle is cleared, the next milestone
will be launching Starship into a true
orbital trajectory and successfully
deploying real operational payloads.
This will mark Starship's first major
contribution to satellite constellations
or commercial payloads, whether for
SpaceX itself or for external customers.
Achieving this will build trust,
demonstrate technological maturity, and
open the door for commercial
partnerships and revenue generating
missions. Beyond satellite deployment,
the payload bay will also play a
critical role in enabling SpaceX's
vision of inorbit refueling. Ship-to-
ship fuel transfer systems rely heavily
on well functioning payload bay
mechanisms to house and deploy fuel
transfer components. Without a reliable
door system, such operations could be
compromised or even impossible. But
perhaps the most significant goal tied
to this fix is longd distanceance space
flight, much like missions to the moon
and eventually Mars. These missions will
require Starship to carry not only crew
but large amounts of cargo, equipment,
and infrastructure. Once the ship
reaches its destination, the payload
door must open properly to unload
essential gear. Whether it's a lunar
rover, habitat module, or scientific
equipment, a malfunction at this stage
could jeopardize the entire mission. In
many ways, successful payload deployment
becomes the final confirmation that a
deep space mission has achieved its
goals. Timing is also critical. SpaceX
isn't looking decades into the future.
It's aiming for uncrrewed missions to
the moon and possibly Mars as soon as
next year. That means issues like the
payload door need to be completely
resolved before the year is out. There's
no room for delay if SpaceX wants to
stay on schedule for Artemis support
missions or future Mars demonstrations.
In summary, solving the payload door
issue is about much more than fixing a
mechanical problem. It's a fundamental
requirement that connects to nearly
every major objective SpaceX has, from
commercial operations in low Earth orbit
to building orbital infrastructure to
pioneering human exploration of other
worlds. How the company addresses this
challenge in the coming months will have
a major impact on the pace and success
of the Starship program. Let's watch
closely to see how they handle it.
Incredible news. Hot staging V3, one of
the key innovations planned for the
future of Starship, has officially been
unveiled during a recent SpaceX company
presentation. This new version includes
several exciting upgrades that signal
major advancements in the Starship
design. But that's not all. This event
also brought with it several important
revelations about the company's future
direction and upcoming developments.
Meanwhile, Rocket Lab has announced a
delay to one of its upcoming missions.
It's no secret that hot staging is one
of Starship's most distinctive features.
First introduced on Flight 2 to
streamline stage separation, the heat
shielding ring sits between the booster
and the ship, channeling away scorching
exhaust and mechanical stress. Over
successive tests, it's proved it's worth
simplifying separation, protecting
critical structures, and smoothing out
the transition to second stage burn. But
back in 2024, during SpaceX's internal
company update, Musk teased a radical
redesign of that very hot staging ring.
Drawing inspiration from the Soviet N1
rocket's jettison mechanism, he hinted
at a new V3 configuration that could
push the envelope further. Until now,
that upgrade existed only in CAD
renderings and animations. On stage at
the 2025 company talk, however, the
prototype finally made its public debut.
Mounted behind Musk himself was the
forward segment of a super heavy booster
ring wrapped in scaffolding and spot lit
for maximum effect. This was the new
hotstaging ring for V3, and its
differences from earlier models were
immediately obvious. First, it wasn't a
separate hoop you bolt on shortly before
launch. Instead, the support struts tie
directly into reinforced hard points on
the booster's structure with no
standalone horizontal ring beneath. In
practice, that means the ring becomes an
integral part of the booster body.
Installation time on the pad will drop
because there's no separate component to
hoist into place. And in flight, there's
no need to jettison the ring at all,
eliminating one more piece of hardware
to reclaim or discard. In other words,
the structure that shields the booster
during separation can stay for its own
landing burn, bringing ship one step
closer to full reusability. Second, and
perhaps even more important, the V3
rings design is far more open. Older hot
staging rings sported relatively small
vent holes, which did the job of
diverting heat and pressure, but still
presented enough back pressure to
interfere with the ship's lower engines.
Many engineers speculated that this
engine suffocation contributed to
failures on flight 7 and 8. When Raptor
engines struggled under abnormal exhaust
flows, the new V3 ring, by contrast, is
nothing more than a network of
zigzagging struts creating vast open
channels for exhaust to escape. Hot
gases and shock waves now stream freely
downward, minimizing pressure buildup
and keeping the second stage engines
breathing clean. The ring's taller
profile adds another layer of
protection. By extending higher above
the booster dome, it ensures that the
searing exhaust from the ship's raptors
can't scour critical systems, especially
the grit fins, before they clear the
ring. In earlier versions, grit fins
sometimes experienced scorch marks or
mechanical shock from passing flames.
V3's greater clearance and open design
should spare them from those hazards,
smoothing out critical aerodynamic
control surfaces. Ease of manufacturer
and refurbishment also figures into the
V3 design. Where the old ring required
multiple welds, plate seams, and
post-flight overhaul, the new lattice
structure is simpler to forge, assemble,
and inspect. Each strut is
self-contained and modular, so damaged
sections can be replaced quickly without
tearing down the entire ring. The
result, lower turnaround time between
flights and reduced maintenance costs.
Two key metrics on the path to rapid
reuse. But the hot staging ring is only
one piece of V3's broader booster
overhaul. During the same presentation,
SpaceX engineers showcased the revised
booster dome. Gone is the pronounced
outer collar that once cradled the
ring's base. In its place, the dome
itself wears a smoother curve with fewer
obstructions around its pressure lines
and plumbing runs. That uncluttered dome
not only sheds heat more evenly, but
also directs exhaust upward and outward
rather than trapping it around critical
weld seams. Perhaps most striking was
the repositioning of the grid fin
mounts. On V2 boosters, the fins sat too
close to both the dome and the hot
staging ring, leaving them vulnerable to
thermal and mechanical shock at
separation. On V3, those mounts have
shifted downward farther from the action
of the second stage exhaust. The new
cutouts on the booster body make room
for both ring and dome exhaust, allowing
grit fins to deploy clean, cool, and
undamaged. Taken together, these
innovations promise a leap forward in
reliability, reusability, and
performance. SpaceX says that B18, the
next booster in the building queue, will
be the first V3 prototype with ring,
dome, and fin upgrades installed.
Engineers expect to roll B18 to Mega Bay
for stacking in the coming weeks. If all
goes to plan, a full V3 booster could
stand on the launch mount before the end
of the year, ready for its maiden
flight. This isn't just a cosmetic
refresh. The integrated hotstaging ring,
the lightweight lattice design, and the
dome/ fin reconfiguration all aimed to
shave mass, cut down refurbishment time,
and eliminate steps in the pre-launch
and in-flight sequence. In a perfect
world, V3 will land under its own power,
ring intact, trimmed, and turned around
for the next mission, faster than any
rocket in history. So, are you ready for
V3's debut? If so, let us know. Welcome
V3 in the comment section down below.
Then, like this video, subscribe to our
channel, and keep pace with SpaceX's
rapid evolution. Continuous improvement
drives us forward, and the V3 booster
promises to be one of the next giant
steps on the path to truly routine full
reusability. Musk's latest presentation
was packed with eyeopening details about
where Starship is headed. We already saw
the first V3 hotstaging ring prototype,
but the talk went further, revealing new
dimensions, engine layouts, and even
production rate goals. First, Musk
walked us through the evolving size of
Starship flight 9 stack. Booster V1 at
71 meters and ship V2 at 50.3 m stands
about 121 m tall. In the next
intermediate upgrade, both stages grow
slightly. The booster to 72.3 m and the
ship to 52.1 m for a combined 124.4 m.
These modest increases will accommodate
larger tanks, a beefed up hot staging
ring and engine system tweaks, but the
full V3 design, the one that will serve
as the workhorse for orbital fueling,
lunar landers, and Mars missions,
soarses to 142 m. That version stretches
the booster to 81 m and the ship to 61,
a scale just shy of last year's 150 m
concept. In practice, we'll see those
first true V3 prototypes in coming
months with B18 and S39 at the 124.4
meter intermediate height before the
leap to 142 m later this year. Engine
layouts will change, too. The new ship
design will shed its protective covers
around the Raptors, exposing a next
generation powerhouse, Raptor 3. Musk
shared images from exhaust of ground
tests over 300 firings totaling some
16,000 seconds of burn time, showing the
engine's simplified plumbing and
integrated cooling loops. On the ship
itself, the engine count will rise to
nine Raptors, trading one row of grit
fins for three larger, more efficient
fins, while the booster adopts upgraded
chines along its sides to improve
aerodynamic control. Production was
another hot topic. The gigabay facility
planned in place of the old high bay at
Bokhica and mirrored at Cape Canaveral
is designed to churn out up to a
thousand starships per year. Musk says
the scale is vital for hitting the
flight rates needed for orbital
refueling, lunar infrastructure, and
eventually cargo traffic to Mars.
Speaking of Mars, Musk unveiled an
ambitious colonization road map. By
2026, SpaceX plans five uncrrewed
landings, each delivering 10 metric tons
of cargo, enough to test landing systems
and deploy robotic scouts. In 2028 and
2029, they aim for 20 missions annually,
each carrying 75 tons to begin
constructing habitats, power systems,
and resource extraction gear. Early in
the next decade, 2030 and 2031, Starship
flights ramp up to 100 missions per
year, each loaded with 150 tons of
supplies, jumpstarting largecale base
construction. By 2033, the goal is 500
missions per year, each with 300 tons of
cargo, enabling full industrial
activity, resource harvesting, and an
expanding human presence. The moon
figures into this, too. Musk hinted at
Moon Base Alpha, the first permanent
lunar settlement, which Starship will
help build in parallel with Mars
infrastructure. Orbital refueling and
station keeping prototypes tested on
Earth and in lunar orbit will pave the
way for sustained operations on both
bodies. Among these sweeping plans, Musk
promised to delve deeper in future
updates covering orbital refilling,
advanced heat shields, and the ultimate
ship catching systems. But even at a
glance, the session made one thing
clear. Starship's growth in size, power,
and production capacity is about much
more than breaking records. It's a
calculated march toward a new era of
routine largecale space missions.
Whether launching dozens of satellites a
month, sustaining a permanent moon base,
or opening the floodgates to Mars
colonization. Stay tuned for our
upcoming deep dives into each of these
revelations. The Starship story is only
just beginning. Meanwhile, Rocket Lab's
mission cadence remains strong, but one
of its upcoming Electron launches has
slipped by a few days. The mission,
nicknamed Full Stream Ahead, was set to
blast off on the 28th, carrying a next
generation Earth observation satellite
for Virginia based Black Sky. However,
Rocket Lab announced on X that teams
will stand down from today's launch to
allow for additional checkouts and with
unfavorable weather in the forecast are
now targeting no earlier than the 3rd of
June New Zealand time. As before,
liftoff is expected around 1:15 p.m. NZT
or 1:15 p.m. Eastern from Rocket Labs
dedicated launchpad on New Zealand's
Mahia Peninsula. The company will open
its live stream 30 minutes before
launch, so you can tune in via
RocketLabs channels or catch coverage on
space.com if they share the webcast
link. Once a loft, Electron's kickstage
will place Black Skye's latest
highresolution imaging satellite into a
470 km polar orbit. According to Rocket
Lab, this satellite will join the
remainder of the company's
constellation, delivering very high
resolution imagery and AI enabled
analytics for daily intelligence
operations. In fact, full stream ahead
represents the second of four Electron
missions Black Sky has booked this year
to deploy its Gen 3 satellites. It will
also be Electron's 65th flight overall
and the company's seventh mission in
2025. Further cementing Electron's role
as one of the industry's busiest small
set launchers. Rocket Lab's ability to
rapidly turn around these flights
despite occasional delays keeps it
firmly in second place behind SpaceX in
terms of launch frequency. Each
successful mission not only adds
capacity to Black Skies commercial
imaging services, but also demonstrates
Electron's reliability and the
robustness of Rocket Labs operational
teams. We'll be watching closely as June
3rd approaches. Once liftoff finally
occurs, Electron will once again prove
its value in the growing constellation
market, and Rocket Lab will take another
step toward its goal of providing
ondemand high throughput access to
space. Copying in the aerospace industry
has always sparked debate, especially
when it comes to Chinese companies. But
what if we told you that some of them
are copying so extensively they're
abandoning their original designs
altogether? That's exactly what Deep
Blue Aerospace, a rising Chinese
startup, appears to be doing. They're
merging features from several advanced
rocket systems, most notably SpaceX's
Starship, into the blueprint of their
next generation vehicle. So, just how
bold is this new copycat rocket system
from China? And why can't it outperform
SpaceX's rockets? After years of rapid
development, the startup trend in
China's commercial aerospace sector
shows no signs of slowing down. Many of
these companies are following a bold
controversial strategy, copying existing
technology to speed up progress and
close the gap with global leaders. One
of the clearest examples of this
approach is Deep Blue Aerospace. Deep
Blue is currently working on a rocket
family called Nebula. Last year, the
company attempted a hop test with its
Nebula 1 vehicle, which ultimately
failed. In response, they shifted focus
to a new concept, combining the Nebula 1
booster with a capsule nearly identical
to SpaceX's Dragon. Their goal is to
create a suborbital tourism system that
mirrors Blue Origin's New Shepard. While
they've carried out some test campaigns,
Deep Blue has yet to complete an
official launch. Still, their plans on
paper continue to evolve. A recent
update on X gave us a glimpse of just
how bold those plans are. An image from
a presentation slide showed a rocket
standing on an orbital launch mount next
to a launch tower, a design unmistakably
similar to SpaceX's Starship launch
setup. This imagery sparked immediate
comparisons, especially since another
Chinese company, Cosmolap, revealed
similar plans months earlier for its
Leap or UHAN rocket. Now, Deep Blue
Aerospace appears to be following the
same route. Judging by their road map,
this launch system is likely intended
for their upcoming Nebula 2 rocket, a
much larger and more advanced vehicle.
Let's take a closer look at the design
details of Nebula 2. At first glance,
its blue and white color scheme may
remind you of Blue Origin's New Glenn,
especially the booster section.
Structurally, however, Nebula 2 bears a
strong resemblance to SpaceX's Falcon 9.
It's a two-stage rocket featuring a
booster, second stage, and a payload
fairing at the top. The inner stage
sports a different color, and visual
cues suggest the use of carbon fiber in
its construction. Technical
specifications back up the visual
similarities. According to the latest
design data, Nebula 2 will stand 70 m
tall with a diameter of five, making it
the same height as Falcon 9, but with a
wider body. The rocket will be powered
by 11 liquid oxygen and kerosene engines
called Thunder RS, each generating 130
tons of thrust. That gives Nebula 2 a
total liftoff thrust of around
1,430 tons, making it even more powerful
than Falcon 9's
1,270 ton thrust capability.
Interestingly, Deep Blue Aerospace
reported that these engines were
successfully tested last year. In those
tests, the Thunder RS engine was ignited
four times, reaching a total burn time
of 60 seconds, with the longest
individual ignition lasting 20. The
company stated that these trials helped
verify the gas generator's reliability
under various working conditions and
fuel mixture ratios. Key components such
as the gas generator outlet, turbo pump
gas collector ring, and evaporator
exhaust pipe were also evaluated to
simulate real engine conditions. With
their latest progress, Deep Blue is
confidently promoting their new engine,
Thunder RS, as a gamecher in China's
private space sector. The company claims
the engine offers high reliability, high
thrust reusability, non-toxic and
environmentally friendly characteristics
and economy, underscoring what they see
as proof of their advanced design
philosophy and technical capabilities.
With this engine powering their Nebula 2
rocket, Deep Blue says the vehicle will
be capable of delivering 25 tons to LEO,
just slightly more than SpaceX's Falcon
9. But engines are just one piece of the
puzzle. Deep Blue Aerospace is also
replicating the infrastructure needed to
support rapid reusable missions. Drawing
direct inspiration from SpaceX's
Starship launch system, the Nebula 2 is
shown standing on a six-legged orbital
launch mount, remarkably similar to the
one at Starbase Pad A. Next to it is a
towering steel framed structure
approximately 120 m tall, resembling
SpaceX's launch integration tower. The
tower features robotic arms similar to
SpaceX's chopsticks or Mechaz-azilla
arms and a quick disconnect arm for
fueling and data links. This entire
setup is planned for deployment at the
Juan satellite launch center. According
to translated documents from Deep Blue,
the site will also include fueling
systems, testing facilities, assembly
buildings, a satellite production
center, and other support infrastructure
forming a comprehensive launch
ecosystem. One notable difference from
their previous design is that Nebula 2
does not have landing legs. This
indicates a major shift. The company
appears to have abandoned its original
landing concept in favor of SpaceX's
catch and recover system. The plan is
for Nebula 2's booster to return to the
launch site and be caught midair by the
robotic arms rather than landing
vertically with legs. This strategy
minimizes ground impact stress, speeds
up recovery, and reduces wear and tear
on the vehicle, enabling a high
frequency, lowcost launch cadence that
could drive future commercial success.
As for the timeline, Deep Blue Aerospace
is targeting 2026 for the first official
launch of Nebula 2. Until then, the
company will continue testing the
smaller Nebula 1 in the coming months.
So, with bold designs, strong claims,
and clear inspiration from SpaceX, can
Deep Blue Aerospace's ambitious copycat
system actually outperform the original?
Leave a yes or no in the comments. Hit
that like button as well, and don't
forget to subscribe to stay updated as
we follow SpaceX and the global space
race closely. As for my answer, it's a
no. Deep Blue Aerospace's approach
simply isn't practical or sustainable.
When looking at their road map and
design choices, several red flags become
immediately apparent. The first and most
obvious issue is their repeated habit of
combining multiple elements from various
rockets into a single system. For
instance, the booster of Nebula 2
resembles SpaceX's Falcon 9, which was
originally optimized for vertical
landings using deployable legs, either
on a drone ship or at a groundbased
landing pad. However, Deep Blue
Aerospace has removed the landing legs
and chosen instead to implement a
catching mechanism using a launch tower
similar to SpaceX's Mechazilla system.
This decision introduces unnecessary
complexity. To enable catching, they'll
need to add landing hooks or pins to the
booster and develop a large precise
mechanical tower system capable of
catching the rocket midair. This is not
just ambitious, it's risky and extremely
difficult. Even SpaceX, the only company
to successfully demonstrate this method,
only achieved it within the past year
and after many iterations of Starship
prototypes and tower testing. And let's
not forget, vertical landing alone is
already difficult. Most space agencies
and private companies still struggle
with consistent success in drone ship or
ground pad landings. Deep Blue Aerospace
choosing the hardest method of recovery,
catching without even first mastering
leg based landings reflects a major
misstep in priorities. Secondly, Nebula
2 is still only partially reusable with
a design strongly reminiscent of Falcon
9, but without the benefit of its mature
reusability systems. The materials used
in the rocket and the kerosene/liquid
oxygen fuel choice are both costly and
not optimized for a fully reusable
system. It raises the question, does it
make sense to pair this type of rocket
with a Starship style launchpad? Clearly
not. SpaceX's Mechazilla and OM are
built to support a fully reusable and
rapid turnaround vehicle like Starship,
not a partially reusable system that
needs extensive refurbishment after each
flight. This makes Nebula 2's
architecture inefficient and financially
questionable, especially if the rocket
is ever used for deep space missions. A
half copy of Starship's infrastructure
matched with a Falcon 9 inspired rocket
results in a mismatched, overengineered
solution that doesn't take full
advantage of either design philosophy.
Worse, Deep Blue Aerospace isn't just
copying the Starship system. They've
also cloned SpaceX's Dragon capsule,
attaching it to the Nebula 1 booster to
propose a suborbital tourism system
similar to Blue Origin's New Shepard.
This Frankensteinike approach, mixing
design elements from different companies
and rockets, doesn't reflect innovation.
It reflects a lack of original
engineering direction and appears to be
more about mimicking success than
building it from the ground up. And Deep
Blue is far from alone in this. Even
China's leading state-run space agency,
CASC, CASC, has begun to mimic SpaceX.
Their future version of the Long March 9
has shifted from a traditional
three-stage configuration to a two-stage
design with aerodynamic flaps,
essentially copying Starship. This trend
of abandoning original designs to
imitate another company without a full
understanding of the underlying
technology is deeply concerning. This
kind of blind imitation doesn't result
in sustainable growth. Startups that do
this often collapse under the weight of
their own ambitions, especially when
they run into unexpected failures. In
the case of Deep Blue Aerospace, we've
already seen this happen. Their Nebula 1
hop test in 2024 failed, resulting in a
destroyed prototype. The issue was
traced to the engine's shutdown phase,
where it failed to reduce altitude
properly and likely lost thrust entirely
during the final descent, causing the
rocket to crash and explode. Rocket
engines are incredibly complex systems.
Fixing one takes time, resources, and
technical depth. Not something you can
fast track by copying external designs.
If Deep Blue doesn't thoroughly address
these engineering gaps, their upcoming
tests could very well fail again,
potentially delaying the Nebula 2
program even further. This trend of
setbacks isn't limited to Deep Blue
Aerospace. Other companies in China's
commercial space scene have encountered
similar difficulties. Space space
pioneers Tang Long 3 recently suffered a
static fire failure and CASC's Space
Kinetic had a failed mission just last
year. Among them, Landspace with their
Zuchu rocket remains the only company to
show truly promising results. So, while
it's tempting to think that copying a
winning formula will lead to success,
the truth is much harsher. Without deep
technical understanding and an original
development path, imitation becomes a
dead end, and Deep Blue Aerospace's
current trajectory seems headed in that
direction. It can be said that behind
the flashy plan, an uncertain and
challenging future awaits Deep Blue
Aerospace. While every organization
hopes to reach the top, copying without
a true understanding of the core
technologies will eventually lead both
the system and the company down a
dangerous path. That's why Deep Blue
Aerospace must evaluate its road map
with great caution and care. So, let's
wait and see what decision they make
next and what kind of outcomes will come
from this risky copycat strategy. This
has been Kevin with Great SpaceX. Don't
forget to like the video and subscribe
if you haven't already to stay updated
with yours truly in the latest
milestones in SpaceX's journey. Thank
you so much for watching and always
remember, curiosity, imagination, and
inspiration will follow you so long as
you keep looking up.