In this video, I’m restoring a beautiful solid cherry Stickley nightstand using traditional refinishing techniques — no paint, just craftsmanship. This vintage piece had a badly damaged lacquer finish, but it’s too well-made to toss.
Although it’s smaller than the furniture I usually refinish, this Stickley nightstand has tight joinery, solid brass hardware, and gorgeous cherry grain — all hallmarks of heirloom craftsmanship.
The top was in rough shape, so I used a combination of chemical stripping, sanding, and toning to preserve the original feel. The brass pulls were cleaned and partially restored to keep some of their vintage patina.
For the final finish, I used Odie’s Oil to enhance the warmth of the cherry, which will naturally darken with age — giving this nightstand a timeless, modern-but-classic look.
If you love furniture flipping, vintage wood restoration, or relaxing paint or no-paint makeovers, make sure to subscribe and check out my other channels: ❤️ @TFGUnplugged – Raw, ASMR-style restorations ❤️ @tfgsnacks – Short-form, quick makeovers
Want to support the channel or shop my tools? See below!
TOOLS & PRODUCTS USED: (Discount codes + affiliate links included — thank you for your support!)
✅Social Media Links & Ways to Support the Channel (Buy Me a Coffee, Amazon Wishlist, etc: https://bio.site/tfg 📫 To send mail: Transcend Furniture Gallery, c/o Angie, PO Box 718, Hantsport, NS, Canada, B0P1P0
Comments are disabled for this video.
So we've got something a little bit different today and a little bit smaller than normally
what I work on. This little, I'm assuming it's a nightstand, is in pretty rough shape but it is
really really well made. This is a solid cherry stickly piece but as you can see there's a ton
of finish damage especially on the top. Quite a bit of tarnish on the solid brass pulls and this
really just needs a good work over. This is going to look so much better by the end of the video,
stay tuned. My name is Angie and I refinish furniture. Sometimes I paint and sometimes I
don't but I always do what I can to save old pieces from the trash. Welcome to my workroom.
So Stickly makes beautiful furniture with some of the tightest joinery I've ever seen on
any furniture. Really high quality stuff. These drawers have two mechanisms to keep them going
straight. We've got these grooves on the side as well as a wooden guide underneath and that's why
these drawers just slide out so smoothly. These are the mechanisms to help that happen and this
block at the back actually has a screw in it that you can set to get the exact perfect depth on each
side so that when the drawer goes in it sits perfectly where it's supposed to. And I'm talking
about all of this because you guys know me, I do a lot of kind of lower end pieces because my main
goal is keeping things out of the trash but it's also why it's so exciting when I get a piece,
even a small one like this, that is really well made. So these are mainly lacquer finishes and you
can see the finish here on the top is just flaking off. I can literally pick some of it with my
finger. The finish is mainly the issue with this. There's a couple of trim pieces here that are a
bit loose. The glue has failed but not a big deal. We can stick that on later. Now if you're finding
this hardware looks familiar it's because I actually did a set of nightstands some time ago
from the same company. There was also a dresser that was made by Stickly. I had a little bit
different hardware but the same person bought the dresser that bought the nightstands so we
opted to do all the hardware in black. I won't be doing that with this piece. I'm going to keep these
brass but some of these are a bit rusty so I do need to clean them up. Now this piece has been in
my storage room for years so I'm just giving it a quick little vacuum on the inside here. I think I
left it in storage so long because it's just a small piece and I didn't think it would necessarily
make a very interesting video but I decided to share it with you guys anyway. You can see the
finish on the top here is so fragile it's just scraping off super easily. This top looks like
it's had a lot of sun exposure and moisture exposure. Now I did start to scrape the sides and
it was doable but as you can see it's not quite as easy. The finish is in better shape there so
I decided to switch to a chemical stripper just to make things move a little bit faster.
It will also help with the finish removal around some of the more detailed areas like the trim.
I want to talk for a second about finishing here. Now these were done like I said with different
lacquers and toners and sometimes glazes. A lot of the finishing schedules from these
amazing makers, it's an art in itself. I take a different approach with these pieces. I love
having them natural. Now this means you're going to see a lot more variation between the heartwood
and the sapwood which are the light and dark areas you see on a piece of wood. Some people
don't like that contrast and some people do. Another thing to note is that even if cherry is
very light initially it is going to darken with time. Unlike some woods like walnut that get
lighter with time. Now initially I thought I was going to need to use oxalic acid on the top of
this but once I got to sanding um I don't think I'm gonna have to. I have a little bit more leeway
with solid wood than I do with veneer and I was able to get down just a little bit deeper and I
think those remnants of stains are going to sand right out actually. I did opt to hand sand around
some of the trim here on the front as well as on the lower leg assembly. I often get asked how to
sand in grooves like this and these little rubber tools are great. There's usually a round side and
a sharp side. You can use the round side to get into these concave areas and then to get up a
bit tighter against something you just switch it to this sharper side. These little tools are
inexpensive on Amazon. I'll put a link down below if you're interested. They're really great for trim
like this. Now I'm going to be putting a tangoa base finish on this but please note that originally
this would have had a lacquer finish. They used lacquers, toners, glazes to get that stickly look
and it helped keep things uniform across all of the inventory. But before you come for my neck for
putting a finish that wasn't original on this I need you to know that these are not old. 1989 right
here. But here's where I'm going to try to strike a balance between new and vintage because like it
or not 1989 furniture is now considered vintage. So once I'm able to get a lot of the surface rust
off I'm going to very lightly seal these with a lacquer and then I'm actually going to use a toner
which is going to take it from this shiny new looking brass to more of a vintage patina brass.
I didn't polish all of the patina off. There's still quite a bit which will show through underneath
this toner. So here we are now. Nudie patootie. All of the drawers look fairly alarmed for some
reason but you can see that I've sanded them inside and out. We are giving this a whole
new finish. I'm so excited. So I'm going to be using Odie's SuperDuper Everlasting Oil on this
piece. I love Odie's oil on cherry. It's so beautiful and warm and like I said it will darken
a little bit over time. I could have done a dark lacquer finish like what would have been there
originally but people around here especially and probably in many parts are leaning now more
shorter video than you guys are used to but I wanted to share it with you anyway. This is a
really cute, really well made piece. Hopefully someone will enjoy this for decades to come now
that it's been refinished. Let me know down below if you like the variation in the natural finish
that I've chosen or if you prefer a more uniform look. See you next time.