Do You Have Empty Cross-Overs? Supercharge Your Inline Cross-Overs!

Inline Skates
180 followers
So crossovers, crossovers really are one of those things
that develop very quickly when you work on them,
when you pay attention to them.
And when you stop paying attention to them
and you take them for granted, they become quite mediocre.
And that happens to me all the time.
Sometimes I feel like my crossovers are way weaker
than they were once before,
or that I've nailed it on one side
and the other side is lagging.
And this drill is definitely the number one drill for me
as far as how I fix this immediately.
This video is primarily for intermediate to advanced skaters,
but if you're a brand new skater
and you're just learning crossovers now,
stick around because there's a lot of basic,
fundamental technique in this video
that will help you out in the future.
Hello, bladers.
Today we're talking about crossovers,
a very important fundamental skill in inline skating.
Crossovers are for accelerating out of turns
and are ridiculously useful on the straightaway
for acceleration with a little lateral movement.
There are tons of crossover variations
for different situations,
but there's one common mistake we all tend to make.
One shortcut that can creep in
without you even realizing it.
Let's examine a basic crossover for context.
On the crossover, that inside skate will be landing
and pushing off that outside edge.
The crossing skate will land just inside
of the center line of the wheel
and then onto the inside edge
as it moves under and away from you.
Notice that the inside skate is landing
well outside of the center line
and then progressing onto its extreme outside edge.
That's especially pronounced around a long, fast corner.
Yes, both legs are working equally.
If they're not, your crossovers might start looking
like a limp instead of a stride.
Arm swing is a whole other topic,
but my rule is short crossovers get a short arm swing
and long crossovers get a full arm swing.
Overall, I err on the side of diminishing arm swing
a bit on crossovers.
So what is this big shortcut that often leads
to imbalance and reduced power in your crossovers?
It's what I call the empty crossover.
I've seen it with a lot of skaters.
I tend towards it many times if I don't pay attention.
I'm talking about when you find yourself
just flinging one semi-stiff leg over the other,
leaving you feeling unbalanced and a bit weak.
For some persistent skaters,
this technique might give you a slight speed boost
or an effective retasking
in your muscle engagement patterns.
But if you want balanced, powerful,
and efficient crossovers on both sides,
I've got the fix for you.
It's worked for me numerous times in the past.
When done properly, the crossover should give you
the longest continuous quad-driven push in skating
if you find your legs flexed throughout.
But more importantly, the second factor
is what this video is all about.
Driving your outside knee upward with purpose
during each crossover,
which will super boost your crossover.
You can skate and crutch all you want,
but until you start leading with your knee more,
you'll not feel the true potential of your crossover,
and this is what we're going to conquer today.
All right, let's get to it.
Finally, we're gonna get to the drill
that changes everything.
When my crossovers start getting lazy or sloppy,
I do this simple drill.
I exaggerate the knee drive of the crossing skate.
For this drill, I would suggest suppressing your arm swing
until it feels well balanced.
You can tuck them in front of you or behind you.
Take your time on this,
but try lifting your crossing knee as high as possible
before bringing it down with power on a crossover.
Be ridiculous about it.
Bring it up extremely high.
This will stimulate your hip flexors,
wake them up, so to speak,
and expand your range of motion beyond the usual.
It really helps to reengage
a more active athletic crossover technique.
When I bring my skate down, it's not exactly a stomp,
but it does feel like a bit of a strike,
and that momentum down into the ground
does carry into my stride.
So I haven't done this knee up thing for a very long time,
and on my second practice with this drill this week,
I was able to do it more effectively from a lower position,
but I would suggest allowing yourself
to skate a little higher than you would
in a full deep crossover position,
at least until you gain the core strength
and control needed.
This is an intermediate to advanced drill.
I have to really think about what I'm doing here.
Let's talk about that skate that is left behind
when you cross it.
When I bring that skate back to the inside position again,
how far I plant it away from the outside skate
is called the reach.
My reach is on the narrow side.
On the right arc, a speed skater could add
like six inches more to what you're seeing here,
but I keep my reach moderate because at most,
I'm turning and accelerating around short 90 degree corners
instead of over hundreds of meters of curved track.
I find slipping in the extra strides helps sling me
out of turns better than more powerful, slower crossovers.
Super low crossovers can give you more power,
but they cost more energy and reduce your ability
to quickly react to terrain changes,
changes in elevation and whatnot, especially the whatnot.
So the right body position.
Let's go back to the crouch and just how much you need.
I like to think of it as a fighter stance.
Your legs are well flexed,
but still ready for quick movements.
When I enter crossovers, I like my leg bend
to be that place exactly between standing
and parallel squat.
Deep enough for great power, but upright enough
that I can still pull my knee and skate up high
on the crossover.
So let's summarize why knee drive matters.
Number one, downward power.
That strong downward drive hits the pavement
and continues to drive that inside edge
more strongly throughout the stride.
By lifting your outside knee high,
you create a more explosive landing.
Number two, with greater cross,
you have more time on the inside leg.
More knee height on the outside crossing leg
is a bigger move and results in more time
on the inside skate,
leading to longer stride length from start to finish.
Number three, obstacle readiness.
That exaggerated knee drive doesn't just improve stride.
Attaining extra skate height preps you
for mounting curbs or benches with a single crossover.
And the fourth factor is decisive transfer of weight.
By pulling the knee up and across strongly,
you will transfer your weight to the other side
with control and speed.
If your knee leads the way instead of your skate
swinging out ahead,
your mass will be more centralized, controlled,
and balanced throughout your strides,
throughout your crossovers.
So another big tip, record yourself doing crossovers.
Trust me, you'll be surprised how little knee drive
you have compared to what you think you have.
It happens to me all the time.
I've repeatedly found myself thinking my crossovers
were immaculate while they were degenerating, degrading.
A quick video can instantly reveal bad habits
and facilitate weeks of progress in a single session.
This is so useful.
And now we all have cameras,
so that's a very level playing field.
Of course, in reality,
the knee drive of a normal crossover looks quite subtle
compared to this drill,
but you'll never skate stiff-legged again
if you revisit this little recalibration regularly.
It works.
This drill is also an amazing equalizer.
If you have a less dominant side in your crossovers,
this exercise will definitely go a long way in fixing it.
Crossovers are one of those skills
that will be equal on both sides if you're persistent.
It's not unrealistic.
So that's it.
That's how you supercharge your crossovers.
Go out, find a space, and look weird while you're skating.
Have fun, aim high, and stay low.
Not too low, not on this one.
But yeah, stay low.
Stay low.
